As many times as you poked and thumped the device I am amazed it still works. Seriously slow down with the pointing. way to ADHD busy for me.

Your video help me a lot to use the module, thanks!!

You have very nicely explained the getting started part!! Hats off to you💯. Since I have understood the board( because of you😊), I want to print a custom pcb for my application. Can you share the Hardware design guide for the module?

Good work searching in the poor documentation of the module in English that AI - thinker brings. Interested in any progress you make in the SDK of the module, which could open many possibilities of programming it without the need of another microcontroller.

Thanks. Worked nicely.

Hi, thanks for the video. Have you made any progress with the sdk, to use the module without a second microcontroller? Really interested to use this module as an low cost gps tracker.

Really interesting project.. like to see more development on this module.. facing problem to purchase 1 of this module. It will be very grateful if u can help.. tnx in advance.. love ur video..👍

That nail! tick tick tick!

Good work and thanks for sharing. How does one access the SD card, is it possible via AT commands or some of the exposed pins?

Have you tried https on A9g? When i tried to post data to database it was sucked.because it doesn’t support https. Is there any update on support of https now?

Hello sir. Can one send the GPS coordinates to a server(preferably xampp) using only an A9G module? Any help would be greatly appreciated, sir.

thank you for the video! I have a question: when I perform AT+GPSRD=1 , I get an invalid $GNRMC code (because the third field is V and the 13th field is N). When I convert this NMEA data to see my location on the map, it shows an accurate location. I saw the NMEA message that you received and it is also invalid. How to solve that?

Thank you for the video

Awesome , I like it , more videos please how to control gpio(s

Hello, we need to modify the standard firmware of the Ai-Thinker A9G, to integrate the use of the inputs and outputs that the module has. The idea is when installing an IMU sensor, if a movement level is detected, the geographical position is transmitted to the server. It must transmit the state of the battery charge periodically and be able to interact with the other IO ports of the chip. Tell us if you can do this and what it would cost, and if you have already done something similar for Module A9G.

Great ♥

If I need to connect it by using USB to TTL convertor then which chip will use?

Did you ever get around to developing software for the A9G that works without having to use a second MCU like the Arduino?

Can I connect A9G with computer by installing any driver (without using USB to TTL convertor)

Hello i need help, I cant get a reply from the A9G to the Ai thinker, when i write AT it doesnt give any reply at all

I tried the Send SMS AT command for this module. I'm stuck at ">" sign

bro a9g at command for saving audio file and play it on call ?? please help

Hi i am interested in develop the web service for the communication with the A9g Module, Can you help me? thanks

Hello Akash, Can You tell me how to publish JSON objects to MQTT with this modules?

Can I connect esp32 cam to gprs gsm module for video transmitter

I have a small problem. I need to use components that are compatible with Arduino. A position sensor (so I use a GPS module. This GPS module must be Adafruit Ultimate GPS Data Acquisition Module (GPS Included)). A position storage (with an SD card that must work with an SPI link). A bluetooth interface. A IHM to visualize the route (using an Android tablet that is compatible with a bluetooth module). you can advise me to use what as a component . because it's 3 components must be compatible with Arduino and an Android tablet IHM thanks to a Bluetooth module.

Thank you.

bro can we do this with out sim card ???

can we load programme to this board using arduino compiler

Yes I do want to see project using this GPS module and transmit location data by LoRa!

Explained very well, Thanks. I an facing the issue with A9G, GPRS is working well with AI thinker serial tool but i am unable to connect GPRS from ESP32 arduino (airtel sim card). Please help

Very good video, I did find the constant tapping on the module somewhat distracting though.

@robertrobert5583

Жыл бұрын

Listening on headphones very irritating indeed!

@miladazimi6705

Жыл бұрын

It distracted you from what exactly? :)))))

Great video! Can you know if the module works with thingsmobile SIM?

Hey, Can you please tell me how to interface Raspberry Pi with A9g module?

Have you considered making your own smartband, maybe cheaper than most on the market or to even interface with your other IoT devices...

Can you please make a video on how to connect the A9G to the Arduino Uno?

Hey how can I code and upload to A9G?

Sir, I would like to use A9G Module as a standalone module for Realtime GPS tracking. so please share the cocern video

how can i use if and else conditions in it ??? PLEASE HELP !!

Thx fot the Vid first, but what I am not understand is why they dont take a microcontroller with it on the Board or at least did a version with it?! May be u have found a Board equals to the need?! Greezes from Germany

Not much data for reading GPS and sending it back to Server.

How do i send data using gprs?

How to connect its pin to raspberry pi

Does https runs for~ 7 minutes and stops working in code?

Does it work with jio 4g sim

I intersted in this module. Do more video about this

@CETech4u

3 жыл бұрын

Noted!

gps data is fix ...some locations is coming please help

I would like to format this to send a live feed to my phone to track my hunting dog when he runs too far. Help would be greatly appreciated.

@alemora2831

3 жыл бұрын

i try to do some similar, I try to send a message or may be a call to the module, and i expect to receive the gps location. something like that

Is there anyone who knows how to access data on an SD card or how to play an audio file from an SD card?

Github code link is missing

how to make post request

Hi, Good video!! However I got an error. When trying to make a GET request, I got a responde like "HTTP/1.1 500 Internal error server" I change mi chip to another, and when I tried the instruction again, I got "Dns fail, try url." Thanks!

@CETech4u

3 жыл бұрын

Try pinging to a different server.

Please make a video on connecting A9g to raspberry pi

Does it support 4g lte sim cards ?

@CETech4u

2 жыл бұрын

Yes

thanks ! not bad, but not so much informations it just the basic level

Now I know your home location!!

@CETech4u

3 жыл бұрын

Come on up here, I'll give you a lab tour :)

help me bring sms bro please

so, it is possible to do something as you did in this video?? kzread.info/dash/bejne/oah5lqOoqLCcqKQ.html the same but with the a9g?