Suggest below about which controller board should we use for our Smallest GPS tracker project 👇🏻 . Also you can get this board at the CHEAPEST price on Internet techiesms.com/product/ai-thinker-a9g-gsm-gprsgps-bds-development-board/

@siva7702

Жыл бұрын

Please go through it with microphone...

I have been following you for a while now and you content is absolutely helpful. Through you I got interest in IoT and interesting projects that I can try as I dig deep in IoT. Keep on the good work.

ESP 32 CAM used it, well tutorial is awesome thanks for making simple and easy to understanding videos.

I know tNice tutorials is an old video but I’m new and thank god I finally found you . Thank you for such an amazing and helpful video ❤️

The introduction was very helpful, thanks!

Great video as always. Could you also make an updated video for getting custom PCBs printed and assembled? I know you had made one 2 years back but just wanted to get an updated one. Also could you talk about the custom charges if ordering from Jlcpcb.

Hats off to the hard work you do.

its awesome!! i love u ! best channel

was a life-saver. Thanks a lot.

I think you can use any Serial terminal that supports Hex inputs to send ASCII values on the Windows system. Docklight software is one of them. Great video! Please make a video on Quectel GSM modules that use OpenCPU software and Eclipse.

I have enjoyed this video and the module itself🤩🤩

the tone and control of ur voice says "I know my sNice tutorialt!". Good stuff buddy.

Almost any economical 8bit microcontroller would work … depending of the features you may want . Most of the standard GPS trackers are programmed through SMS for several reasons . You may have a SIM with internet enabled but you need to set the APN and serverIP/port to the device in order to work. Some standard features ( coordinates are most basic) are setting time zone, GPIO handling for door or cut oil, power cut alarm , ignition sensing etc. Also you would need to set low power conditions when it is stationary or not connected to the battery. So depending of which features you have in mind , would impact in microcontroller selection and budgeting. For IOT application I do prefer GSM over WIFi since would be online as long is battery powered and cost of data cost around $3 usd a month for 50mb. Most of high end trackers ( with several functions and sensors ) won’t use half of it sending burst of data each 30secs.

thats a sick gold chain man!

I feel 10x more confident in soft soft, thanks!

Thank you so much, I’m learning tNice tutorials in quarantine and you made it very simple I really appreciate it, thank you for going over every little

@techiesms

Жыл бұрын

Glad it was helpful!

very good explanation of the video, it would be interesting to develop a gps project for a vehicle showing the trajectory and control the ignition of the vehicle's engine.

Fantastic summary.

Nice video, thanks for sharing. Can you please share details on how to use the SD card functionality?

Amazing crack, and the tutorial was perfect. I´m testing it right now

@techiesms

Жыл бұрын

Did it work?

Thank you for tNice tutorials. You've done a great job breaking down the features and build. I can now concentrate on my instead of the

I've been playing on garageband for a couple weeks and just got the trial of softs. I was worried there wouldn't be any clear tutorials, but

TNice tutorials just made it so clear to thank you so much

Finally Great video 👍👍👍👍👍👍

thank you the video was really useful. when i connect the A9G to ESP32 and connect it to the laptop, the serial monitor in arduino doesn't show anything when i press the reset button. can you help me with this please?

Thank you so much!!

Always helpefull content🌹

@techiesms

Жыл бұрын

😇😇

vaaaaaah bhai vaaah. Great tutorial🙏

Excellent Sachin

Hi @techiesms, I saw a video of LoRa in your channel. The allowed frequency range in India is 865-867 MHz. But, you have used 868 MHz. Is it fine using 868MHz in India?

What was the battery specifications,that u were using in video

Could you please show how to configure this board for a MQTT connecetion ? There is not much info for this device on internet

Good evening sir, sir can we program this module accordingly if yes which software

sir can we use this as GPS tracker for tracking real time location of any expensive MTB's what changes we have to make in the module to fit the module in MTB Can you make a tutorial on that

Using this A95 Module can you please make home automation, use sim card so no need to use wifi for home automation just insert the simcard.

Wonderful Module

dude next make a portable project.. i think this is the smallest feature pack module yet right?? also put some speakers and headphone jack and make it more funky project..🤣🤣🤣🤣

Ham us model ko microcontroller ki tara bi use kar sakte he kya? A9g me microcontroller he kya?

Hi. Is it possible to change IMEI through AT command??

Hi!! The video which you shared was very helpful for me. Can you please share the Arduino codes and libraries for the A9G module.

can you explain how to calculate current consumption in sleep mode ?

Sir can we use arduino to insert programs

I already working on a9g module and this video is so helpful to me thankyou so much ❤️.

@techiesms

Жыл бұрын

Glad to hear that you liked it

@Monotic-j1i

Жыл бұрын

Which board you select in Arduino for programing this board

@akashsivasubramanian4067

Жыл бұрын

@@Monotic-j1i both esp32 and arduino promini

@axiscodm4434

Жыл бұрын

@Akash sivasubramanian bro I need help

Great video! If I needed to program it, which board should I choose in the Arduino IDE?

@techiesms

Жыл бұрын

Any controller you can use

Sir .. Would you please make videos about this module : -How to use A9G + WiFi -How to interface A9G with Atmega328 please 🙏🙏🙏 One more thing , we need 3G & 4G modules

does board have wifi or how we conect to the internet to make get request?

Man tNice tutorials is on of the best tutorial in general on youtube. Clear, simple, constant, good to listen. Thank you for sharing.

Can we make sim800/900 module as hotspot router.... As I want to provide hotspot using sim800 module to connect esp01 module to internet... Also want to connect esp32cam to it

does the module support 4G? Thank you for the tutorial

Hey how’s it going? My name is Bruna, I’m working on a project using the A9G module and I’m having trouble sending SMS and also with the internet… I would like to know which command you use to send SMS I’m from Brazil, my project is a tracker

you aren't a setup master without a set of cans around your neck.. I'm wearing a set now even though I don't know what I'm doing! LOL!

thanks brother i love youuuuuuu

Which sim card do you use in this

Hi, I have a question. I live in Turkmenistan, our sim card model name is "Tmcell" code is +993. That is, will this sensor work in our country?

You have a tutorial on how to use it in sketch not in Serial and how to get the speed etc?

Looking forward for most compact gpc tracker video

From where can I buy this board . I'm unable to find it in electronic stores

Nice project. Willing to buy this board and usb to ttl converter. I got doubt after watching this.After connecting this board, which board we should choose in arduino ide tool.

@techiesms

Жыл бұрын

You don’t need to chose any board. Just select the right COM port and open the serial monitor. That’s it.

How can i program? i want to program this as you have done for sending msg for ever 10s .

Try to use a cheapest and smallest microcontroller like this one (Atmel ATTINY414-SSNR) and also make a second video as soon as possible

@techiesms

Жыл бұрын

Thanks for the suggestion I’ll try to work on gps tracker project asap

@techiesms

Жыл бұрын

Connect with us on WhatsApp +91 82000 79034

Superb sachin ji. Use attiny85 board

tNice tutorials was so cool thanks man

Any way to get components shipped to El Salvador?

bro please make this project using blynk 2.0 and a9g module it will surely be helpful for me cant wait for this module next project

Pls how can I use arduino board with A9G gsm+gprs+gps .I need connection diagram pls and step by step on how to configure the devices for vehicle tracking .thank you sir.

Can you run Blynk on this?

OMG🤯🔥🔥

For host mcu STM32 L series has low power consumption in sleep mode....

i don't have access to a programmer but i have an arduino uno,please how can i use the ardunio uno on my A9G board

Superb and very useful video. Can we make our personal app ( may be app inventer based) to track location of tracker. That way it will be a perfect diy tracker device. If possible, sachin pls help with this.

@techiesms

Жыл бұрын

Let’s see

Too good

can we do it using arduino pro mini board

These days it is hard to get a 2G sim card what's the alternative.

Thanks for the video! can we program the A9G in python and make it workable with out external MCU?

Could you make GPS tracker with blynk

Excellent video sir! I love your enthusiasm for your projects. Perhaps you can add some English translation of your non-English parts (I'm not able t identify if it's Hindi or a regional language)... I suspect you're saying something funny?

@techiesms

Жыл бұрын

Ya it’s Hindi Our national language Added to make some funny moments But sure I’ll add translations of that too Thanks for suggesting

@grottyboots

Жыл бұрын

@@techiesms Awesome! I worked in a couple of factories in West Bengal province (one in Kolkata, 2008, one in Durgapur ~2017) and loved the language, at least listening to it. I try to learn a few words & phrases where ever I worked, but Hindi was just too different to me (English Canadian). Question on Altium.... I want to do drawings of two things: my ever-growing home network and the electrical wiring in my house. But people look at me like I'm crazy if I suggest Fusion360, which has a pretty decent electronics/PCB solution. Seems to me electrical drawings should be easy. I'd prefer Fusion360 so I don't have to learn another CAD software. And I can use the free license, at least until they take that away from us! Also, if my calendar is correct, it is Ganesh Chaturthi this week? If so, I wish you and yours a Happy Ganesh Chaturthi! May the coming days and years be joyful and prosperous!

you gotta tune the instrunt, by right clicking on it in the channel rack

can we send the message to multiple numbers ......?? and what is the range of A9g module ??

Does a9g communicate to firebase database?

Hi I am a junior college student tryin g to make a automatic callin and messaging system using this can . project idea is to send call and a alert mesaage when a button is pressed so can i make it using a9g + arduino .

Since when did CTRL+Z not work in the Mac terminal? I think you are mistaken.

Can i use 4g simcard for this?

I have a question, doesn’t it need a code for using the comands?????

can jio sim work in module??

I'M GETTING CONTINOUS +CREG: 2 AND THE A9G BOARD IS NOT GETTING READY ? WHAT MUST BE THE PROBLEM ?

I do have professional GPS Platforms, it would be interesting which protocol can be defined as professional GPS do. There are much more features to have in consideration. I’ll be please to help in this endeavor.

@techiesms

Жыл бұрын

Please send me more details about it

@enredao_electronico2737

Жыл бұрын

I’ll contacting you soon , also I’ll create an account so you may see what a tracker send as data and how server handle it . I’m following you long time and you always create amazing content.

@enredao_electronico2737

Жыл бұрын

Email sent to your Gmail

Thank you sir new subscriber

@techiesms

Жыл бұрын

Welcome 🙏🏻

Since the project is focussing on Low Power , I feel STM L series or TI MSP series or SiLabs Gecko series or Microchip PIC nanowatt series of microcontrollers can be looked into 👍

@techiesms

Жыл бұрын

Thank you so much for the suggestion

@techiesms

Жыл бұрын

can you suggest development boards related to that chipset you have suggested so that we can try using them first?

@rampr4225

Жыл бұрын

@@techiesms TI offers MSP430 Launchpad (with MSP430G2553, a 16bit MCU) evaluation boards costing between Rs.1k-2k. This offers 4-5 low power modes, on board debugger to quickly get started. I think they even provide a live Power Profiling tool which is very helpful. Once your design is done, I feel you can migrate the design to a low pin count mcu......

@rampr4225

Жыл бұрын

@@techiesms you are welcome 👍🙏

Dude no suggestion but a request to build a Advanced 4g connected ,SMS,call submersible 2motor with 2Bentex starter 3 phase 1 phase

If you're trying to make it as small as possible, why use the A9G as an AT modem, with a second microcontroller, instead of programming the A9G directly? Unfortunately there is no Arduino core for it (yet at least). But there is a pretty good SDK with a lot of examples. I've worked with it before and it's not the difficult to get running. And the A9G has a pretty powerful 32 bit microcontroller on it, running at 312 MHz. So you would probably be hooking up a less powerful microcontroller to it, if you used it as an AT modem. Which would be kinda dumb...

@techiesms

Жыл бұрын

We will be trying that really soon Share some important links for that examples

@mzwenkosihlela7989

11 ай бұрын

HI PLEASE CAN YOU SHARE LINKS

@jilvirpaeste8258

10 ай бұрын

It means this device microcontroller can't be used in a full project? You still need another micro-controller?

can I get this board ? In your site it's out of stock ..

When the a9g receiving call, can a9g display the number that call it? I just only see RING... Anybody has solution?

how to install windows 11 arm on Lenovo y700 tablet?

Can this board provide internet?

I saw you the other day at Paldi law garden on the scooter in the morning.

@techiesms

Жыл бұрын

I don’t think that was me As I travel to law garden mostly in the night time

@HemangJoshi

Жыл бұрын

@@techiesms ok bro.. 👍👍👍

Stick with it it gets easy over ti

Sir, why use 17,167,0,0 number for CSMP?

Nice. Use ESP8266 d1 mini. Lets try to make it as cheapest as possible. Looking forward to next video

@-rate6326

Жыл бұрын

Esp8266 has gps module?

@wolvrG

Жыл бұрын

@@-rate6326 ESP8266 + A9G

Can you please tell me only 4G GSM module dimensions?

hi bro how to connect mqtt