Hope you enjoy this one team. If you haven't already, make sure you enter to win some MAHLE forged pistons here gleam.io/fb/OiNsK - Taz.

@derickstiffs9051

4 жыл бұрын

As a New Zealander myself i always enjoy good old kiwi ingenuity.

I find it funny that it takes a sports car that isn't sold as a BMW to boost the aftermarket support for BMW's B58 engine. Even with all the trolls talking smack and hating on the GR Supra, you can't deny they amount of attention and love it's getting from the aftermarket scene.

@carboydorifutoparty3976

4 жыл бұрын

In a way yes but the S55 was practically booming in its own way to were people jumped them up to 1100whp+ but there's still the lack of popularity for them that makes it rare sadly.

Fantastic video as always!

Can't wait until pneumatic valvetrains (Freevalve) become mainstream so camshaft tuning becomes a thing of the past!

@flyonbyya

4 жыл бұрын

X88X On the contrary...I’d contend that with the FreeValve system, the entire spectrum of inlet and exhaust dynamics becomes infinitely tunable, from mild to wild...at the push of a button!

@andoletube

4 жыл бұрын

@@flyonbyya You're saying "on the contrary", then you're 100% agreeing with X88X...

@all4bspinnin311

3 жыл бұрын

You likely will not see that. Most manufacturers are going electric

@austinweippert4065

2 жыл бұрын

@@all4bspinnin311 pretty sure Koennigsegg did it with the gemera

@all4bspinnin311

2 жыл бұрын

@@austinweippert4065 you're correct. They were the ones that came up with it if I recall. I love freevalve but sadly due to emissions we're all faced with everything eventually becoming ev. But, im hoping a few companies will release aftermarket freevalve kits for lsx or other common gas engines in the future. :)

Great video

Not bad for a little Kiwi company 👍

How to select the correct camshaft for our engine build ? Valve lift, duration and etc

Sounds like there’s a bunch of variables... Because there is !

Will they work in the 2020 model engine with the lower compression and six exhaust ports?

@carboydorifutoparty3976

4 жыл бұрын

Pretty sure they could since they're both the same but just different heads is all so there shouldn't be TOO much of a difference between the 2.

@Mp-jw1qg

2 жыл бұрын

yes

Really interesting from 9:00 on! Some of you may be a little confused by the talk of cam' and valve lift being different. While the valve to pivot point will usually be the same, because of the geometry of the valve train the contact point between the lobe and follower's are moving closer, and further, from the pivot point, with the leading and trailing (opening and closing) flanks having different lift rates as a result. There was a member on the HPA who had a bit of trouble following this, and I found a site with some nice graphics, and info', for him that should help an understanding of this - it's for a Honda, but exactly the same principle applies for all rocker/finger followers, even if the relationship of the three points varies - www.pattakon.com/pattakonVtec.htm With this engine, the additional links adds complecity, but it should still be easy to follow.

Can these cams be used on the stock motor? Or do they have to built motors only?

wow

skrrt

Is anyone else having audio issues with it phasing in and out? Had this on different devices over different videos.

@hpa101

4 жыл бұрын

Do you have a specific time stamp it's happening at? - Taz.

The moment Toyota started building trucks with chain driven transfercase, put V6 engines and automatic transmissions into as many products as possible...I realized they were steering away from what made them great. Japanese manufacturing is not nostalgic, they are always leaving the past formulas, methods, ideas...to make room for renewal. I do not see this as a strength. Now you're telling me the latest Supra has a BMW engine that relies heavily on augmenting mechanical timing through PWM and hydraulic pressure? It's like watching a beloved commander who led you through hell and multiple battles slowly morph into a hot yoga practicing, tree-hugging, pansexual who is rooting for Bernie Sanders, who wants to show you their latest gadget that really exfoliates their skin. Not a Supra. Fuk this I'm out.

@carboydorifutoparty3976

4 жыл бұрын

Let's be honest here. Which do u ever see people tuning,modding,etc wise in the car scene with BMW vs Lexus. If anything,Toyota doesn't have a thing in there line up worth putting in the mk5 and if anything they can't make a i6 for one car soley since it'd be too expensive. So they went to a company that made engines that were tunable and modded unlike theres that are rarely ever tuned or touched at all unlike the 2j itself. If anything there such a family friendly manufacturer that it doesn't makes any kind of sense to just throw millions out the window like that no matter how big of a company they are,it's going to take years to recover from the sales they'd lose if they were to build it themselves.

The propaganda is getting smarter. The car is ugly and fat.

@teslafarts6402

4 жыл бұрын

BF109G, A90 was faster around VIR than a Charger Hellcat 2016.

@carboydorifutoparty3976

4 жыл бұрын

Your acting like all new cars aren't. Especially sportscars.

@BF109G4

4 жыл бұрын

Tesla Farts Good job for BMW.

@BF109G4

4 жыл бұрын

Carboy Dorifuto party The C8 isn’t

@carboydorifutoparty3976

4 жыл бұрын

@@BF109G4 doesnt have to be a C8 when Nearly every new car now is overweight. Plus concentrate on the mk5 the C8 has noting to do with the mk5.