“Great video! The detailed explanation on how to properly sharpen an axe was incredibly insightful. I especially appreciated the emphasis on safety and the step-by-step guidance. The key takeaway for me is the importance of regular maintenance to ensure tools perform at their best and to prevent accidents. Thanks for sharing such valuable tips

@creationholic101

19 күн бұрын

Thank you! Cheers!

@dickienightingale

19 күн бұрын

Seems like a lot of effort just to put an edge on it ,just a few rubs on either side with the grinder works just fine👍

@TipsMaster-le2dn

15 күн бұрын

You are truly an enthusiastic and observant audience member. You have discovered that he is a very caring person, always ready to share all his experiences in life and work.

Never seen an old timer use anything but a file. People now days trying to show how to do things is bullshit.

@jeffcornelison888

19 күн бұрын

Then make a video and show us how it's properly done.

@OdinLothbrok

19 күн бұрын

​@@jeffcornelison888why do you need a video to use a file? It's a common sense tool.

@jeffcornelison888

19 күн бұрын

@OdinLothbrok Apparently you did not understand my comment. I get it's a common sense tool. What I don't get is why would someone like yourself get on here and bust somebody's balls about how they're doing it when you're not making a video yourself showing how to do it.

@DavidWade-fm3pb

19 күн бұрын

@jeffcornelison888 Th comment wasn't personal but I do see tons of videos people do who don't know have a clue about what they are doing. You did a good job, just not the old way I am old and find it difficult to change. I apologize sir.

@creationholic101

11 күн бұрын

It looks complicated at first, but once you've created the tool it will be very easy and fast, especially it has real effects.

45 seconds with a flat bastard file will get better results.

@creationholic101

11 күн бұрын

Thanks for sharing!

The only time you'd do this to an ax is if you were strictly using it as a weapon. Try chopping wood with this edge and you'll be redoing it within a few hits. The edge is too slim.

@JugglesGrenades

11 күн бұрын

That's the reason I did this to my tomahawk...... I keep it in my car in case someone wants to carjack me. It's my "disarming" tool.

@creationholic101

11 күн бұрын

The heat is not as thin as you think

@MilanCelko

4 күн бұрын

​@@JugglesGrenades33t

I very seen 2 people (1 was me) slice their finger, very seriously, cutting kindling with a super sharp axe. Happened almost instantly. Never ever have I sharpened like that again. Been burning wood for approximately 45 years.

@johnrhodes3350

19 күн бұрын

The trick is to keep ones fingers out of the way. See how 'Ray Mears' teaches to chop kindling and logs with a hatchet, camp axe, small forest axe

@creationholic101

14 күн бұрын

Thank you for sharing your feedback. Have a good day!

初夏さん，一月遅れのHappy Birthday🎉👏😄 久しぶりに初夏さんのギターと歌声を聞いて嬉しかったです。 コロナ前に大阪の堺市でライブが有りましたね。知らなかったので生で拝見できませんでした。それと大阪の品の無さがお恥ずかしいです。大阪を代表してお詫びいたします。🙇‍♂ ここ５年ほどで声がすっごくキレイになった気がするんですが，そう思うのは私だけでしょうか。 新生，大久保初夏Blues Project。嬉しい便りです。今までの楽曲も保存して拝見しております。 一人配信も良いものですね。PowerfulもBluezyなのも素敵です。 これからもLadies 3ピースバンドで楽しませてください。また大阪でのLIVEをお待ちしています。👋😄

@Creative114_

16 күн бұрын

❤❤❤

@creationholic101

5 күн бұрын

ありがとうございます。私も大阪に行ったことがあります。美しくて活気のある街です。

WOW, I don't know where to start. That is a hatchet my good man! Any cutting edges should be sharpened on a static machine like a bench grinder or a linisher at a push. Finally, have you ever tried using a razor to cut down a tree? I did, I started in 1997, still working on it now, 2 billion razors used so far! 😂

@creationholic101

8 күн бұрын

Thank you for watching

Mega like! Thank for sharing @@

@creationholic101

19 күн бұрын

Thank you! Cheers!

Another great idea, thank you!❤

@creationholic101

15 күн бұрын

Glad you like them!

Get a belt sander 120 and 400 grit belts. 3 minutes of work max

@creationholic101

11 күн бұрын

Thanks for sharing!

Really

@creationholic101

5 күн бұрын

Thank you for watching

A sharp ax dulls very quickly, I know by experience.. there is only one reason to have a razor sharp ax is to cut off arms, legs, head.. And that will still cause your ax to dull very rapidly.

@creationholic101

11 күн бұрын

With this tool, I think sharpening the ax will be very simple for you, it won't take you even 1 minute.

Great job. Edson, from Brazil.

@creationholic101

18 күн бұрын

Thank you very much!

I always follow your channel and every video you show me your amazingly skilled hands, from good and creative ideas, your videos are always understandable and captivating.

@creationholic101

5 күн бұрын

I am very happy to read your comment. Have a good day!

First comment love from India ❤️

@glenngrabow7816

20 күн бұрын

Second love from Germany

@creationholic101

20 күн бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@DIYTechTrends

20 күн бұрын

@@glenngrabow7816 Wow! nice

Very intelygent idia 👍good job 👍

@creationholic101

20 күн бұрын

Thank you! Cheers!

I Am Inspired By Your Creativity, I Wish You Rapid Development, Thank You For This Video, It Is WondЯ надихаюсь великими досягненнями інших людей erful😏👍👍👍

@creationholic101

15 күн бұрын

Thank you for watching

You did very well dear friend.

@creationholic101

20 күн бұрын

Thank you! Cheers!

خیلی عالی ممنون که با حوصله یاد میدین❤❤❤

nice ideas.. My next video will be on ax sharpening

@creationholic101

15 күн бұрын

Thank you! Cheers!

MERCI SUPER TEKNIK

@creationholic101

2 күн бұрын

Thank you! Cheers!

It's great that I discovered your channel

Blade looked sharp at the edges and thick and dull in the center.

درود..واقعاعالی وزیباوآموزنده بود.ممنونم ازشمادوست عزیز..ایران..شیراز🎉🎉🎉

@creationholic101

20 күн бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thanks for sharing, great idea

@creationholic101

19 күн бұрын

Thanks for watching!

Brasil!!!!

the video is so helpful

@creationholic101

20 күн бұрын

Welcome to Creation Holic channel! Thank you so much for your support

what is the size of the bolt and nuts

@creationholic101

8 күн бұрын

nut bolt 10mm x 80mm

やるじゃん。すごい実用的。

@creationholic101

20 күн бұрын

Hello! I am glad you like this ideas. Wishing you all good things!

you really did very well

@creationholic101

20 күн бұрын

Thank you! Cheers!

@TipsDIY8989

20 күн бұрын

@@creationholic101 Please continue to make more quality videos

If you split a lot of wood you want a dull ax.

Caldas de Vizela - Portugal

@creationholic101

20 күн бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

hi it's lovely but why old dis

@creationholic101

8 күн бұрын

Sorry, I didn’t quite catch that. Can you repeat the question for me please?

Edge overheated...ax trash

Para que serviu a marcação com a caneta? Ele não respeitou os limites da marcação!

Brilliant ! Made the tool in less than 10 minutes and sharpened 2 axes - great results !

@OdinLothbrok

19 күн бұрын

Just get a flat file and do it in 45-60 seconds.

@creationholic101

11 күн бұрын

Glad you like them!

brilliant!

@creationholic101

20 күн бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Si no moja con agua el hacha se corre el riesgo de quemar el filo ojo.

@creationholic101

2 күн бұрын

Hello! thanks for your comment. Wish you all the best!

no entiendo el objetivo de pintar el filo de la hacha con color si a la primera pasada con el pulidor se borra I don't understand the point of painting the edge of the ax with color if the first pass with the polisher erases it.

@creationholic101

Күн бұрын

it helps me clearly identify the point that needs to be sharpened

I always use a file. And never shaken an axe at that angle it'll be full in two licks on that stick

@creationholic101

5 күн бұрын

Hello! thanks for your comment. Wish you all the best!

it was great idea ❤

@creationholic101

15 күн бұрын

Glad you think so!

Waste of time (the video and the axe sharpening). Use a file.

Well it is sharper but you lost durability it going to chip or get ruff edge from hit with it that thin

@creationholic101

14 күн бұрын

Hello! thanks for your comment. Wish you all the best!

THERE IS A BETTER WAY

@creationholic101

8 күн бұрын

Can you share more about it

@timothyroche6445

7 күн бұрын

@@creationholic101 I use a Lansky, you need consistent angle

Oof! Cant even ise a strop right! I hope this is rage bait! Pure garbage. The single side flap dosc is fine, but everything else after if fine. And as others have saod. Its too steep of an angle.

Чоловіче не роби з мухи слона сокиру гострять так як потрібно користувачу в залежності що і як потрібно рубати малюй собі на малюночку а мужик гострить сокиру на око як йому потрібно Боже мій до чого ви дожилися ви що не з цього світу на лобі собі малюй а сокиру мужик має сам хоч наждаком хоч бруском вміти нагострити ще покажи як срати ходити

🇷🇸👷🧑‍🔧👍🥁

@creationholic101

5 күн бұрын

Thank you for watching

I want to contact Khaby Lame

@creationholic101

20 күн бұрын

Thank you for watching

@BrockHansen

17 күн бұрын

Any surveyor would have finished sharpening before he got his marker out

Не катит! Не верьте!!!!

@creationholic101

20 күн бұрын

It's quite effective, try it and feel it

Absolute garbage. Ffs.

@creationholic101

5 күн бұрын

It really works, you should try it and feel it

Good ax have welded high carbon blade . You can sharp it over and over and it will be dull after 3 min over and over again

@creationholic101

2 күн бұрын

Thank you for sharing your feedback