Anything from steve Lindsay is well worth the money. I made 1 purchase a couple years ago and I'm never buying anything from anyone else other than Lindsay. I have both this airgraver featured in the video and a classic palm control costing over 3k. I worked 2 months straight just to buy it and it was more than worth it.

@RioGrande1944

3 жыл бұрын

Alamo Armed Civilians, we are really glad you like the products and we are glad you like the content with Steve Lindsey. We hope you continue to watch our videos!

@user-ik1vw7us8j

2 жыл бұрын

كيف طريق شراء

I've been using a BenchJewel for about a year and a half now, and it was hands down the most important and beneficial investment I've made for my engraving work bench. It cuts anything from copper to titanium with no issues at all. Always runs consistently and never needs adjustment.

@rodgerroelf6986

11 ай бұрын

Hey..I'd like to know what's the cost of one..

@5centminer

9 ай бұрын

1,071 USD I think

Anytime Rio makes a video about a tool, you know itll cost at least 1k. Looks like a sweet tool for engravers though.

@markgibson8358

3 жыл бұрын

Right on the $; cost for the initial setup is $1,071 !

This dude was so mellow in his presentation when he said " I'm excited to present" I couldn't tell if he was or not a real professional

The Bob Ross of engraver salesmen.

thanks phil!

Very nice information and explanation

@RioGrande1944

2 жыл бұрын

Thank you for the kind words! We are glad you liked the video!

Waw... it's amazing tool!!!!

This looks amazing! Is this the same tool I see people use for bezel setting where they use a modified tip? Thanks Phil! 💜

Thx

Recently watched AMbros Video Where he made it With a Raw bolt..This is osm

@RioGrande1944

2 жыл бұрын

Hey there. Glad you liked it!

Sir. What is the minimum pressure to operate the grever. My newly purchased didn't work at 35 psi.

@RioGrande1944

2 жыл бұрын

Hello, the minimum pressure is 60 psi. The ideal pressure is between 65 and 100 psi. The higher the pressure, the more power you can achieve and the better the performance. We hope this helps, let us know if you have any other questions!

@alahero1012

2 жыл бұрын

Thanks a lot sir. this help answer my question. God bless you

Well shit, I'm 17 and was looking to get into engraving my rings but it seems like I'll have to figure out another way to do it. If you have any recommendations on beginner tools please let me know

@arsalan2231

10 ай бұрын

It’s not easy, but you can just buy old school hand engravers for like 15$ including the handle. It’s a skill, it’s gonna take hours of practice, but hand engravers aren’t expensive. You’re just looking at like, the height of the industry right here. Both tools will do the same job, but this one makes it many, many times easier.

What air filter would you recommend using? Does it matter if you use a type of air compressor?

Hi i m gaurav. From engraver india. Want to know what is the best way to buy one set

How much are these machines? Thank you

Sir I want to come and learn from you

I want machine with this

I need this tool engraver

@RioGrande1944

2 жыл бұрын

We think it's a great machine, and you can find it to purchase here: ow.ly/i4rd50F1oXY

Can we set fragile gemstone like emerald, Selenite, Maxixe etc with this tool, what is the price for it in India and location to get it?

I am from Pakistan plz tell me how can I purchase this and plz tell me price

can you engrave stainless steel?

@j.robertgibson1496

Жыл бұрын

Yep. Works great on stainless.

I want this pen

@RioGrande1944

3 жыл бұрын

Tariq Wani, her is the direct link to it! www.riogrande.com/product/lindsay-benchjewel-artgraver-set/118222

I have an air engraver hand piece .I did connect it to a compressor air but it is not working ,is any wrong with air supply?

@alierem4266

Жыл бұрын

Young man. No easy or cheap way around this type of equipment. Lowest cost in this hobby/professional tools will be --ballmark-- usd3,5k --9k. Asian copies few hundred dollars but best reckoning of many who own them is poor 'dependability', needing repairs etc. An option could be used flex shaft or micromotor type equipment which will need to be mastered well to produce decent quality --but not as classy as hand engraving push cutting or air gravers--. Think well before parting with your $$$. Gd luck, regardless

How much cost this

How many years ago this model was launched pls reply me

@RioGrande1944

Жыл бұрын

Thank you for the question. Here is a link to the product with more info: ow.ly/i4rd50F1oXY

hi

I need this tools plzz sir

Engraved mechine price

How much price this hand pic

@RioGrande1944

2 жыл бұрын

Hello! Links to the products featured in the video are in the show description.

How can i buy it pls

@RioGrande1944

2 жыл бұрын

Hello! There is a link to the product in our bio.

What price masin

@RioGrande1944

Жыл бұрын

Thank you for the question. There is a link to the product in the show notes.

pls send me this model link

@RioGrande1944

Жыл бұрын

Thank you for the message. There are product links in the video.

how much for engrave machine in Indian rupees

@AA-69

6 ай бұрын

It works out a 560,000,000,000 rupees .. Hope this helps and let me know how many you'd like ?.. If you buy 25 you get one free !!!😘

Where can i order it ?

@RioGrande1944

Жыл бұрын

Hello! All products used in this video are linked in the description box above.

@060906kara

Жыл бұрын

@@RioGrande1944 ok thanks i check it

Good for pakistan

how to get the tool sir, do you sell it 🙏🙏 sorry

@RioGrande1944

2 жыл бұрын

Hello, here is the link to the Lindsay BenchJewel® ArtGraver™ Set on our website. Let us know if you have any other questions! www.riogrande.com/product/lindsay-benchjewel-artgraver-set/118222

Engraver machine price

@RioGrande1944

2 жыл бұрын

You can find it here, ow.ly/i4rd50F1oXY

Get hand graver(use old Swiss file) and it will do the same job if you can’t use hand push ones no point to buy air compressor piece 🙈😂

Chinese knock off costs about $200 but you have to replace or repair every other year. Tips are Tops.

@tariqwani3748

3 жыл бұрын

I need this tool

@tariqwani3748

3 жыл бұрын

Ok I need this tool

@eight-dg3oz

Жыл бұрын

Where do u get it from

Yikes over a grand.

You don’t look very excited do you

I need to stool

Wait a few weeks and im sure the Chinese will have one out for 20 bucks 😏

If it provide smooth curing surface ?And else if trained hand can lose profession ability in systematic use of it . Believe real master doubt about it ..

Too much money