One thing I appreciate about your business is that you realize just how big the sub compact market is and you look for attachments to accommodate that market. Thank you!

@GoodWorksTractors

Жыл бұрын

Thanks David! It is a big market and lots of holes in the attachment lineup

It's nice to see June Cam!! With the pallet forks on 3 point...just add another set of ears higher up so one can set the pins up higher, resulting in the pallet forks able to touch the ground when the quick hitch is in low position.

@elbertlepard8595

Жыл бұрын

make ears taller with 2 sets holes for pins, solves 2 problems, been looking for this attachment, coming soon I hope

I wish the Speeco quick hitch and a receiver on it to move my little trailers…Oregon may be my solution…thanks once again Mr. Courtney!

@GoodWorksTractors

Жыл бұрын

that would be pretty slick, have a nice weekend Elaine!

@elained9591

Жыл бұрын

@@GoodWorksTractors you as well Mr Courtney!

Those forks are pretty slick! I'd like that just to transport them if your going somewhere and need the bucket and forks. Pain in the butt strapping them in the bucket on a trailer!

@GoodWorksTractors

Жыл бұрын

Good point there too

That three point pallet fork setup would be great with a hydraulic top link.

A couple manually pinned legs on the outside of the for frame would work. Stow them in the up position when in use and slide them down when needed to disconnect the forks? Just a thought, either way when they’re ready for sale, please take my money!

Some great looking products in the mix. Looks like everything Summit is coming out with is quick hitch compatible which is a plus. The dual attach forks are a great idea.

@GoodWorksTractors

Жыл бұрын

Quick hitch compatible whenever possible. Just makes sense.

I like the idea of the box blade, land plane option.

Great idea with the versa forks! Combined with a power top link would be the ultimate setup.

@GoodWorksTractors

Жыл бұрын

Yeah it would!

With hydraulic top link you can easily operate those rear forks

I like that box plane alot!!!!! A hydraulic option would be awesome combined with a bydraulic top link that could be a money maker

Hay vato that fork attachment is super. A lot of guys are working from home or with an extra gig. When the big delivery truck comes and you have a rock driveway all they can do is deliver your heavy box or shipment onto the road and like you said if you dont have a front end loader the back forks save you money on the front end loader and it gets your delivery back to the shop.

@GoodWorksTractors

Жыл бұрын

Agree with that!

Great to see what you are developing with the front/rear forks. Very versatile! Will be purchasing something next year so hope to see these available soon.

Looking forward to the Kioti summit hydraulics install video. If I was closer I would surely provide you with my CS2220

@GoodWorksTractors

Жыл бұрын

Thanks for watching!

rear pallet forks look amazing! can't wait to see production unit 🙂

For the versa forks I have an idea: Use the shipping container as a way to lift it off the ground high enough for attaching to tractor 3-point. Incorporate a "stand " into the shipping crate that secures them for shipping but then can be removed from the crate by the owner and re-used. This could be a selling point, that each new set comes with a free stand!

@GoodWorksTractors

Жыл бұрын

Our hope is to ship these UPS Ground, not freight though. However, I like the idea, pretty clever!

Way cool stuff. Thanks for sharing. Be well be safe.

Courtney, saw the Easy Wheel in this video and bought it. I love it and agree that it should be part of the original equipment. Marcus had a great idea in creating this product. It is well made and easy to install. It makes adjusting the rear implement height from the seat. I look forward to other new ideas for products for my tractor. Thanks for all the information and videos.

That front/rear pallet fork attachment is just 6 months too late for me. I already bought forks. This unit has just so many features that I would have wanted. Somebody put some serious thought into it. Very nice.

@GoodWorksTractors

Жыл бұрын

Thanks Bob!

Got excited to hear about Kioti products! I have a 2022 3510 SE with cab but already have 3rd function installed. Willing to let it be a test mule for other products if need be

@curtisrogers8708

Жыл бұрын

I have the same tractor as you with cab. So glad I got the cab. How do you like the 3rd function? I’m thinking of having it installed some time after the new year.

Excited to hear more about those tillers!

The Summit attachments seem to be high quality equipment 👍🏻. You’re coming out with some pretty cool attachments, front and rear mount pallet forks 👍🏻👍🏻

@GoodWorksTractors

Жыл бұрын

Appreciate it!

Cool new implements coming out

My wish list keeps growing. Keep up the great work!

Best theme music in the industry! Thanks for the info!

@GoodWorksTractors

Жыл бұрын

I like it too, thanks Henry!

For the forks, you could design a wooden shipping crate/pallet that doubles as a stand.. it would last a long time and people can just build another out of whatever material they have around after.

@GoodWorksTractors

Жыл бұрын

Good idea...we do hope to ship these UPS Ground though

Great channel I learn alot from you. I just bought a kioti cs2520. Will in the near future need some more attachments.

I like the versa forks idea! A hydraulic top link looks to make it easier to line up the forks. Can’t wait to see a HD version!

@GoodWorksTractors

Жыл бұрын

Definitely, hydraulic top link is handy for just about everything.

I really like those front guards and that summit tiller. I have a lot of rocks, and it would be a little bit more peace of mind when tilling, that I won't have a rock shoot forward and hit something it shouldn't.

@GoodWorksTractors

Жыл бұрын

Good point

I’m always finished mowing in December 🤭

@GoodWorksTractors

Жыл бұрын

Haha, nice :)

This was a very Jam packed and fun to watch Video 😁👍I don't know how you guys have the time to research and develop stuff on top of the regular day to day🤯but thank you for all the hard work. Those pallet forks are going to fly off the self. They are so handy. Should be the first attachment sold after ballast on every tractor. Thanks for the video😁👍🚜💨🐓

@GoodWorksTractors

Жыл бұрын

I think they'll be a big hit, hoping they are available in the spring

Great video!!! Finish mower 👍👍👍, versa forks also👍👍👍, your dog likes the great outdoors... have a great day...🙂....

@GoodWorksTractors

Жыл бұрын

Haha, thanks David and same to you!

I always find your content entertaining my smallest tractor is 50 HP so most of these attachments have no practical use for me but still enjoy the content keep up the great work

@GoodWorksTractors

Жыл бұрын

Thank you sir :)

So ready to see those prototype forks to come out and see the pricing of them

with those forks, you could drill a small hole in the bottom bar at either end and have a simple rod that drops down at either end with a split pin or such to hold it there. Pretty easy kickstand to get it off the ground and cheap to make / unlikely to break. Just drop the rod down, put the pin in to hold it, and lower the rear hitch down before unhooking them.

Great video Courtney!! Like the forks 3 point an loader that would be very handy for sure. The summit tiller is definitely sweet looks well built Like the summit tractor. Thanks for sharing be safe have fun enjoy

I really like the front/ rear pallet forks

@GoodWorksTractors

Жыл бұрын

Thanks Ric

Cool video Courtney! Looks like some nice, well made attachments! My neighbor has a Kioti but I think it's an older model.

@GoodWorksTractors

Жыл бұрын

Thanks Kyle, have a good one!

I would just store it on a 8.5" rail road tie so the quick hitch wouldn't be a problem. I mentioned a flip down C bracket like car lifts use, but using our saw mill gave me an idea that is even simpler. A thick bar of steel with a foot on the bottom and a hole every few inches. It would run in a channel on the sides and when you are done with it you release a pin that keeps it in the upright position, let gravity drop it, and reinstall the pin in a hole farther up the bar. Like a kick stand used to store a rear blade or other attachment that won't sit level on its own. Those you rods with feet, but flat steel would work fine for this application.

@GoodWorksTractors

Жыл бұрын

I think I know what you mean, wonder how much weight that would add...or is it removable?

@Noah_E

Жыл бұрын

@@GoodWorksTractors yes, it wouldn't be "captured" so you can install or remove it completely by tipping the frame back and letting it slide out the bottom. Make it an option. People who store it off the ground don't need them, but can use the holes in the frame for bungee cords and the like. People who store it with the forks far apart might only want 1. People who store it with them close to each other would want 2 for added stability. Also, you never realize how useful chain hooks and D rings are until you help someone with equipment that lacks them. All our FEL buckets, forks, and trailers have them

Nice looking attachments.

@GoodWorksTractors

Жыл бұрын

Thank you sir

Great to see some new products coming to your business! I sent you and email as well. I recently purchased a CK2610SE Cab and I'm fairly close to you in MI. The only real option it doesn't have is front Hydraulics, which would be a handy thing to have in the future for sure.

@GoodWorksTractors

Жыл бұрын

Thanks Bill, send an email to support@goodworkstractors.com to be considered.

really like the big wheel size on the brush hog, even on YT a lot of folks seem to have those wheels snap off when they reverse into brush

Oh man, I just bought some pallet forks but those versa bracket forks look insanely functional for my property.

With all the new and increasing amount of compact and subcompact tractors with backhoe's out their , I think Summit should make a quick attach bucket changer to change out buckets on theese smaller tractors ! I think it would be a big seller now ! A lot of us have a need to swap out different size or style buckets for different jobs ! I would like to know what you think on that ! Thanks .

@GoodWorksTractors

Жыл бұрын

Have to give that some thought, thanks for watching!

I’m definitely in the market for 3 point pallet forks.

@GoodWorksTractors

Жыл бұрын

Good deal!

Versa - forks magnificent idea. Sure could it on my B2650. Very informative video. Please keep up the great informative videos.

@GoodWorksTractors

Жыл бұрын

Thanks for watching!

I’m really interested in seeing the summit hydraulic install video

a lot of neat equipment

@GoodWorksTractors

Жыл бұрын

Have a good one Riser!

Versa forks... make a stand that slides into the 2" receiver. Yea you have to get off the tractor but any kickstand style would require you to get off the tractor. Can't wait for these to come to market. As long as they are affordable ill be ordering a set.

Love the box blade! Was hoping that Bottomless Bucket might have made the cut😊. Maybe next time…

Versa forks are VERY interesting!!😀

Great video! Wish there was a summit tractor dealer near me! Wish you were a summit tractor dealer I would come to see you about buying a tractor .

I bought a set of forks for the 3pth and it has the same issue with the quick hitch, really disappointing. I'm glad you're letting folks know ahead of time that it will be this way. I can get away with setting on a pallet.

@GoodWorksTractors

Жыл бұрын

Yeah, propping it up off the isn't too bad as long as you have a dedicated spot

ugh picked up a kioti cs2520 but in northern ohio but love to see the summit install

I like the rear fork setup

@kdegraa

Жыл бұрын

I like the fork frame can connect to both the three point hitch and the loader quick attach. Three point pallet forks are not new but being able to fit them to a loader is new, to me at least.

Anxious to see your video on installing the Summit Hydraulics system for the mini-grapple......(which you are currently shipping to me!) Time to be the "kid in the GWT candy store" once again!

@GoodWorksTractors

Жыл бұрын

Thanks for watching Dwayne!

A stand for the pallet. I would block up a pallet and slide the forks into the pallet and disconnect.

@JCWren

Жыл бұрын

I think you'll have to add weight to the pallet. The weight of the frame may cause it to tip or at least be close to unstable. Maybe use a top pallet and a bottom pallet that are offset slightly, so the bottom pallet is closer to the tractor side.

@GoodWorksTractors

Жыл бұрын

I sat mine on blocks and it stayed put

Love watching your videos. Always something new I find that I would love to buy. I have a LS XR 4145 if that is something you think summit hydraulic would work on for a 3rd function. I'd be happy to bring my tractor to you.

@GoodWorksTractors

Жыл бұрын

Thanks, I'll post more about the LS setup closer to spring.

I've got a Kioti CS2520. I live in Manitowoc WI, but for a free diverter kit installed I could make the trip to Kalamazoo.

VERY interested in your fork set up! Please put that out, so I can buy american made! That two inch receiver is key. Can't wait to buy it.

One thing to note is the replacement tines on tillers, I had a kubota tiller that I used on a simplicity legacy xl diesel, the replacement tines were more than the cost of a new tiller, granted the gearbox and rest of tiller built stronger than most but still…..

@GoodWorksTractors

Жыл бұрын

That sounds crazy, most tines can be bought at TSC

Put flip down kick stands on the ends of your fork design.

@GoodWorksTractors

Жыл бұрын

Yeah, we're "kicking" around ideas

Those forks looks like a great versatile design. Like the integrated ball hitch receiver. Any idea what MSRP will be?

@GoodWorksTractors

Жыл бұрын

Not sure yet, but I expect it to be competitive with other Made in the USA products. Can't compete on price against China though.

Any idea how much the pallet forks will run? The design is pure genius!

@GoodWorksTractors

Жыл бұрын

Thanks Scott, not positive yet, but they'll be competitive (except with Chinese stuff)

How about doing your hydraulic install on a older Massey Ferguson.

@GoodWorksTractors

Жыл бұрын

Haha, not this time around!

Those Oregon attachments look to be made by Woods.

@GoodWorksTractors

Жыл бұрын

I'm not at liberty to say 😉

I think those forks will be a hit if priced right. Coupled with a hydraulic top link would really be handy.

Oreeegun hasn’t gone anywhere 😂

@GoodWorksTractors

Жыл бұрын

Ha!

Haven't read the comments. Why not a ssqa braket for the tractor 3pt. The you can use any ssqa attachments

That sub soil shank should fit in 2"sq 3pt receiver, be more cost effective. Excellent quality. Nice videos, it would be nice to see prices plus a shipping map, say price per pound as of date of filming👍

@GoodWorksTractors

Жыл бұрын

Thanks for watching. I feel like that might be a lot of stress on a 2" receiver mounted setup? Maybe I'm overthinking it.

Will you be selling the versa fork frame minus the forks? Have a front set already and don’t need another set of actual forks but the frame to put on the PTO is a great concept.

@GoodWorksTractors

Жыл бұрын

Yes, we'll plan to sell them as frame only as well

Want boxplane do you have a idea when they are going to be 4sale

Will the fork implement work on a 2022 Kioti CX2510HST with the loader skid steer hook-up ?

Does the easy wheel interfere with attaching equipment to the pto.

When will you ship to Canada? I want one.

What about the TYM tractors. I have a T264.

Massey and Yanmar throwing down big time against John Deere and Kubota and so many others at the moment so quite the wild one 2023 en route absolutely.

Good Morning, I just bought a 2022 ( 20hrs. on it) LS XJ 2025 and im looking for a third function installed.... I have a trailer and an F450 to pull it....I am a fuzz less then 200 miles from you guys... Thanks Paul Yingling

@GoodWorksTractors

Жыл бұрын

Thanks Paul, stay tuned in the future for the LS version!

So, which product did you like best? More information below on the products that are available now. We'll post follow ups on the other products as soon as they're available. Oregon Trailer Mover: bit.ly/3FB7qnp Oregon Rotary Cutter: bit.ly/3VJCNmz Oregon Tiller: bit.ly/3HpwfoM Save 5% with code GWT on the Easy Wheel: tractoraftermarket.com Save 5% with code GWT at Summit Hydraulics: www.summit-hydraulics.com For all Summit Tractor products visit: www.summittractors.com LOOK AT OUR MOST POPULAR ATTACHMENTS! Speeco Quick Hitch: bit.ly/3NFC0yl Stump Wrecker: bit.ly/3GptiC5 VersaBracket Combo: bit.ly/3wUPrnl Snow Pusher: bit.ly/3NB4BVw Landscape Rake: bit.ly/3GpSlF6 Land Plane: bit.ly/38SDHcY Pallet Forks: bit.ly/38wRztu Grapples: bit.ly/3PNNYaZ WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win! USE CODE "GWT" TO SAVE BIG WITH: BUCKET BRACKETS @ www.jufabworks.com CUSTOM GRILL GUARDS @ www.5elevendesignz.com PTO QUICK ATTACH @ tractorptolink.com DIY HYDRAULIC SOLUTIONS @ www.summit-hydraulics.com GAME CHANGING GREASING SYSTEMS @ www.lube-shuttle.us/store TIRE CHAINS @ www.tirechainsonline.com PREVENT FLAT TIRES @ www.multiseal.us CULTIPACKERS & CRIMPERS @ www.packermaxx.com ALL OEM JOHN DEERE PARTS @ www.247parts.com ACCESSORIES AND BACKHOE BUCKETS @ www.muddscustoms.com CUSTOM TRACTOR FLOORMATS @ www.tractormat.com PROTECT, ORGANIZE, IDENTIFY HOSES @ www.outbackwrap.com BOX BLADES FOR ATV'S @ www.northwoodsfabrication.com HYDRAULIC SYSTEM PROTECTION @ www.hoseendchamer.com DUMP FROM THE SEAT MATERIAL COLLECTION SYSTEMS @ www.proteroinc.com POWERED SWEEPERS SWEEP UP ANYTHING @ www.sweep-all.com EASY WHEEL TOP LINK HANDLE @ www.tractoraftermarket.com TIRES, WHEELS, AND DUAL ADAPTERS @ www.millertire.com AMERICAN MADE CARRY ALL ON STEROIDS @ http:www.bigtoolrack.com THE BEST TOOTHBAR AND MORE @ www.heavyhitch.com 5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com SHOP: www.goodworkstractors.com AMAZON: www.amazon.com/shop/goodworkstractors SUBSCRIBE: kzread.info LIKE: facebook.com/goodworkstrac... FOLLOW: instagram.com/goodworkstra... MERCHANDISE: stores.inksoft.com/good_works_tractors_merch/shop/home *Discount codes cannot be combined with any other promotions, offers, or deals! **I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support!

Is there a cat 0 version of that box/land plane?

Is there an ETA or pricing info on the versaforks yet? I'm fresh in the compact world and in need of a set of forks. I have my eye on a set from express steel for my lx2610, but I like the idea of these much better and would like to support you and your channel for both the entertainment and information you've provided to me over the past year or so.

Do you guys never mess with Masseys? I've got a GC1725 that needs some love!

@GoodWorksTractors

Жыл бұрын

Not specifically, but most of the attachments we feature will work with Massey.

The summit box plain I was on their website looking for it after you showed it. I like the idea of the pallet forks. Do you know if a middle buster plow can be switched to a sub-soiler because I don't want to have to buy both if I don't have to.

@GoodWorksTractors

Жыл бұрын

Yeah BoxPlane is just a prototype now, but hopefully available soon. I’m not sure if the two tools could be combined. The shaft length is different, so would likely compromise something with that. I’ll have to look at the hole pattern for the blades and see if those lineup.

@kevinbrewer2141

Жыл бұрын

@@GoodWorksTractors thanks I will have to look at that.

I have more info on your summit tiller and finish mower if you are interested.

@goodworks tractor Are you planning on making the versa-forks (or versa-forx) ssqa as well? And what would the rating be? (2500# would fit my wants/needs) I've definitely had a want for that kind of forks setup for moving pallets and ibc totes Also love the box plane idea. I hope that works out

@elbertlepard8595

Жыл бұрын

There is a adapter plate available to do that, ssqa to jdqa

@shadowulf

Жыл бұрын

@@elbertlepard8595 thanks, I'm just gunshy adapter on an adapter for a "heavy load" attachment

Do you carry TYM tractors? IMO they're one of the best on the market right now.

@GoodWorksTractors

Жыл бұрын

I don't sell any tractors, just attachments. I keep hearing good things about them.

12:10 For the stand option, maybe use Square tube at each end with a smaller tube inside that serve as feet.

@GoodWorksTractors

Жыл бұрын

Thank you Marc!

I have a 2021 kioti CK3510 SE if your interested in doing something with the summit hydrolics. Not sure what your thinking, I already have the third function from kioti and two rear remotes from the factory but if there's something else I would be interested. I'm about an hour and a half away from your location. Didn't see an email listed for you on KZread.

@GoodWorksTractors

Жыл бұрын

Thanks Bill, send an email to support@goodworkstractors.com to be considered.

Would rather see bail spikes as an option on that versa hitch instead of a receiver.

@GoodWorksTractors

Жыл бұрын

Likely incorporate a 2' receiver mount bale spear.

1:20. Hey Courtney, It's Orygun not Oregon. You said it perfect the first time! ;-)

@GoodWorksTractors

Жыл бұрын

Haha, I know. My brother lived there for a few years, so I like to bug him with that :)

The rear forks look like they’re only for JD for loader use . Do you have a 3 point attachment for using a universal quick attachment.

@GoodWorksTractors

Жыл бұрын

Right now, we’re just in prototype phase. Hope to have the SSQA version too.

Bummer I have a ck3510 Kioti but I’m in California

Would love to have a rear remote for my Kubota BX23s, but i can`t justify for how much they charge for the kit. Not to mention installation fees on top of it, and THEN hoping they install it right. Seen to many idiots thinkin they are good mechanics...NOT! Can`t trust anybody anymore.

Just emailed you. Have a new CK3510 SE and a New holland Boomer 55 both brand new and within 30 min from you.

Whats the price on the TLX54 tiller?

@GoodWorksTractors

Жыл бұрын

Not sure yet, more info soon though

@dougdorrer4622

Жыл бұрын

@@GoodWorksTractors $2500 and coming in April 2023

Do you have a news letter I can subscribe too. I'm local and a buyer of those forks and potentially some other stuff once those forks are available... 1025R owner.

Everytime I see a box plane video and then a land plane, I just don't understand why they are never convertible. My only guess is their price is soo low, the saving to have 2 different tool rather than 1 that do both with the same durability is small.

@GoodWorksTractors

Жыл бұрын

Gotta imagine this will be significantly cheaper than buying two tools, but we'll see!

How can Michigan consumers order a summit tractor

@GoodWorksTractors

Жыл бұрын

Gotta wait until they expand, potentially sometime in 2023

I think my Massy could use some hydraulic up grades.......just saying...lol

@GoodWorksTractors

Жыл бұрын

Hehe :)

@wayneross16

Жыл бұрын

@@GoodWorksTractors , in all seriousness , Massy's don't seen to get enough love . Maybe i'm missing something ?

@GoodWorksTractors

Жыл бұрын

@@wayneross16 Just a pretty small market share in the compact tractor world. Not a bad tractor, just a ways down the list in popularity. I'd say that's gotta be tied into the number of dealers selling them.

How much is that Box Plane going to be. Great idea. I want one, I'm just hoping it's. Ot more expensive than a box blade and a land plane lol

@tman8939

Жыл бұрын

the box plane is of interest to me also, cost will be a factor.

@GoodWorksTractors

Жыл бұрын

Not sure yet on price point. More to come!

@GoodWorksTractors

Жыл бұрын

Definitely, always comes into play