Follow this link for contact information: kzread.info/dash/bejne/hpNmudCDfdbAkbg.html

@josesiyo1549

3 жыл бұрын

jeffescortlx hello Jeff I need your help if you can help me if not I understand, I’ve been trying to find a bench tester to test out the gas gauge as you did on the video, I was thinking of the autel ms906 but I just wanted to know what bench tester do you recommend. Please let me know

@jeffescortlx

3 жыл бұрын

@@josesiyo1549 I made my own with a ECU and potenimeters.

@Jackson-hx6fr

3 жыл бұрын

@@jeffescortlx hi I need help with my 2001 gmc savana van I called 2 repair shops don't want to help. gauges don't work are the gas shakes bad. oil pressure bounces around. Temp and volts seems speed seems ok check gauge light is on had a mechanic drop the tank ok their and oil pressure checked out he said he think its in cluster any help with it thanks Joe

@Draco5185

3 жыл бұрын

Have you ever done a cluster from a 98 Chevy Silverado? My fuel gauge is twitchy and I'm wondering if it's my sending unit or the air core. Any insight would be greatly appreciated!

@jeffescortlx

3 жыл бұрын

@@Draco5185 twichey or rapid movement is from a dried up air core motor. Wide swings to empty is a failing sending unit.

Great video, Jeff. We’ve missed you these past few months!

SO enjoyable to watch people who know what they are doing. Thanks for showing us.

Absolutely top notch professional repair! Really love what you did. Nice and clean repair. Many thumbs up from me!!!

Always a pleasure to see someone who knows what they're doing.

I’m liking these back to back videos lately 😉

Your work is clear and professional i just found your youtube videos and enjoy them keep up the good work

The best video with no nonsense talk easy to understand and follow thanks for that!

Nice to see another cluster video. Been awhile. Great video!

I had an 01 tahoe, I miss this cluster. I had LED color bulbs in it. It made a neat effect in the way i had them. only issues ive had in the 17 years that truck was owned by my family was the fuel gauge. But that was indeed the sending unit issue

Thank you Jeff, there's so much support for 03+ so thank you for giving good info on these older clusters.

Thanks for the awesome video. I knew these aircores could be fixed I read it on a forum probably 6 years ago but I couldn't find it again and wasn't sure of the technique. For some reason I thought they said to lithium grease and use a needle to get it in I just couldn't figure out in my head how that would ever work. I'm really glad you showed this. Luckly I've been saving all my crap ones so I've got about 30 of them to fix now. I hadn't looked too deep into it because I get these so cheap at the local junk yard but this saves me from wasting time on non transmission temp clusters for 99-02 lol. I personally haven't run into the solder points on the odometer connector being an issue expect on prior repair attempts. The resistors always are the problem for me.

@jeffescortlx

4 жыл бұрын

Grease would be the right lube to use, I just haven't found a way to get it in. Heavy oil seems to do the trick. Keeps the needle from flopping around.

@benjaminfisher8681

Жыл бұрын

@@jeffescortlx what weight of oil do you use?

@jeffescortlx

Жыл бұрын

@@benjaminfisher8681 more details here: kzread.info/dash/bejne/ppxqr5Kwd7a-p9o.html

Thanks to your video I was able to repair the A8 wire ground and the dash in my truck works again ….good job

Love this! I will be directing people to your channel!

Thanks for the insight to aircore drivers👍👍

What oil did you use for the gauges ? Thank you great video !

Just discovered this is you, great video explanation! Thank you sir! See ya Wednesday.

Such good info!!

These videos are the best

Great video Jeff. On a mechanical stand point that fuel gauge issue on the chevys, it's always the fuel level sending unit located in the fuel pump assembly inside the gas tank. The part is around 40 bucks but will require the fuel tank to get removed in order to do that so most people just replace the fuel pump while the mechanic is already there.

@jeffescortlx

4 жыл бұрын

Yep! I have to break this news to a lot of people with fuel gauge issues in the 99-02. But they must have corrected the sending unit issues in the 03-up, I hardly ever hear of those needed replacement.

Exactly what I needed to see 👍

Thank you bro I learned a lot with you today

Perfect videoooo tytyty. Couple questions... what are you putting on solder joint before resoldering? Paste flux ? What kind of solder ? What are you washing it off with after resoldering? Isopropyl? What kind of oil for in the motor ?

Excellent video! Thanks

You are a Genius my man

I have 3 of these. great video.

Great work

I was an instrument systems tech for 11 years in the USAF. I suggest that if you think that you can do this sort of repair on your kitchen table to save money that you should send it to Jeff instead. The odds are not in your favor.

@rrcoster

4 жыл бұрын

LOL remind of UXWBill kitchen table repairs but he actually does decent job doing home repairs

Great channel

My 02 cluster's VFD has a couple of very faint thin black horizontal lines going through it, like dead spots all the way across. Do you know if this is usually a display problem or if removing and reflowing, as you did in this video, often solves that too?

Nice attention to detail. How about using a thin shim when positioning the tach and speedo needles. Would make it quicker and easier and more consistant.

Very informative! Thank you.

What kind of jumping wire gauge do you use? If possible could you let me know where you buy them from? I am just starting to learn and would greatly appreciate it.

Where did you get a new lens?! I looked all over the place for one. (Junkyard, many different online sites, and electronic stores). I ended up buying a new Escalade lens on amazon haha. I had to cut the tips of the four right gauge needles to make it fit and the lens kind of obscures parts of the icons but at least it works.

I have a 2002 chevy 2500hd 6.0 and my fuel gauge bounces around like crazy then lodges itself downward. And when i took the cluster out, is it normal for the speedometer needle to move around freely like that? Saw that in the video as well. And lastly any idea why my speedometer is acting like a tachometer? Ill sit there idling and it's at the 10mph and when i rev up the truck it moves with the tachometer needle. Has me clueless.

What was the toothbrush for? What type and weight gear oil would be best for an 02' cluster repair?

They must use a pretty high ISO oil in those motors. You improved the dampening, but still not quite what the factory is. Probably be a pain to attempt pushing that high viscosity oil in. Cool stuff, I learned something today.

@jeffescortlx

4 жыл бұрын

Correct. It should be closer to a grease, but the motors can't be disassembled and reassembled.

by chance do you have the cluster plug pinout for this year? 99-02

wish i had this video 10 years ago when i had issues with mine !

Hey Jeff, thanks for taking the time to show us the process. When I put the gauge needle back do I need to remember the position it was at before I pull out the needle? I'm just curious.

@jeffescortlx

3 жыл бұрын

Yes the needles need to be put back in the correct location, these do not have a physical stop location to start from, it's a electrical location.

jeffescortlx Where did you get the oil for the temp/fuel/RPM refill?

Great video, Jeff! A couple of questions. Your tool list did not mention the oil syringe? I tried to rig one up but got poor results. What kind of oil did you use? Also, since I don’t have a bench-test setup, do you have another video about setting the gauges in the truck?

@jeffescortlx

2 ай бұрын

The syringe is something I picked up from Amazon about 10 years ago so I don't remember the details. The oil I use is just the heaviest gear oil I could find at Walmart.

Do you have a new memory chip for the 2005 Silverado HD? I like to buy one my chip is bad. The problem is (Odometer Error) in the U15 chip

would you tell me what is the wire that trigger the warning oil level lamp on when oil pan is low?

Awesome videos on these 99-02 models. Quick question. I need to calibrate the oil pressure needle on my bench when powered up. Noticed in the video that you connected the wire A1 (tan/white) to ground with a resistor. What is the value of the resistor your are using?

@jeffescortlx

3 жыл бұрын

I don't remember the value off the top of my head because it's probably been 8 years since I've set it up. But it's a little over 50% sensor range.

You have some great videos and you really know what you are doing. Can you take all the light switches in a 99-02 and put white LEDs in them I have watched videos of them doing them all but I know nothing about soldering???

Thanks! Jeff

Hey bro I have a question what wires do I need to connect to light up the display for PRND

What kind of oil do you use? Also is that syringe special, or just a normal deneedled one? I typically repair 03-06 but I bought an escalade to resell and wanna fix it. Also, will the pigtail from 03-06 work to bench test, or do I get to repin my connector?

@allanb3222

3 жыл бұрын

You will definitely need to repin the connector, as I had to do just that to work with the 99-02 cluster.

great video thank you for the info

Hello Jeff, and thanks for doing these video's. Excellent information. I'm curious as to what you use for the class 2 Serial data to run the gauges? Thank you.

@jeffescortlx

2 жыл бұрын

Home made bench top module.

@charlessims1076

2 жыл бұрын

@@jeffescortlx thank you Sir. I didn’t know if a signal generator would work, or if you needed something special.

I've watched this video a couple of times, but never to the end like I did this time. Question...with the oil pressure gauge, are you saying they always kind of just hang in that position and never go back to resting/zero position? I've got an 01 Suburban, but I'm coming from an 03 Silverado, and am used to the stepper motors. Thanks!

@jeffescortlx

5 ай бұрын

Correct. With the 99-02 The oil pressure gauge will not do a full sweep or a zero reset like the 03 and newer.

Hi Jeff where can I buy that oil for the air core I'm trying to fix my dad 2000 gmc Sierra 1500

Jeff, great video!, the ticking noise that the dials make when starting the car, is that normal or does it needs the oil and bubble removal ? they are so noisy , you can also hear the RPM dial ticking when idling. thanks

@jeffescortlx

4 жыл бұрын

99-02 clusters use air core motors, they don't have gears. They can't make noise.

Could you do a video of how you setup your bench tester. I have 03-06 setup. Would love to have this set up…

@jeffescortlx

2 жыл бұрын

kzread.info/dash/bejne/pX9hkqymldK4irA.html

What kind of bulbs does that cluster use? I need to change the left blinker out

Hi can you help me I have a 2001 gmc savana 1500 van gauges I don't know if it has aircore motors or stepper motors oil pressure gauge bounce around fuel gauge shakes bad temp and volt speed seems good I called 2 repair shops and don't want to do anything so I hope you might help thanks Joe

@jeffescortlx ... what soldering stations do you use and recommend?

@jeffescortlx

2 жыл бұрын

Check my channel page, in my latest video I'm giving away a couple

could you help with the pin out have not been able to find it to build a bench tester

What could be causing my gauges to get power when you shut the truck off? If you tap on the dash they will move. It's a 2002 GMC Yukon Denali 6.0. has the trans temp just like this gauge

Much better for changing bulbs and gauges :-). Flourescent displays always look better than leds, just my opinion.

@larryborders5108

4 жыл бұрын

zx8401ztv hey I was going to change my cluster lights to LED so that my cluster is brighter do you have any recommendations on bulbs ? I have this same cluster he is working on👍

Exactly what syringe are you using? & oil? I literally have mine taken apart on my wife’s coffee table. My fuel and oil motors spin like no other.

what do you use for dampening oil?

@fochdischitt3561

3 жыл бұрын

For anyone asking in the future, this should work. Super Lube Silicone Oil 5000 cSt Part #56504

What kind of oil I should use for the bleeding please

Thank you very much for the great info. Can you please provide the type of oil you use and is that just any type of syringe?

@jeffescortlx

2 жыл бұрын

The oil I'm using is nothing special. I'd actually recommend going heavier than what I use. Use the thickest oil you can suck up into a syringe.

Can I disable my abs bulb with no issues? SAS my truck and no longer using the front abs sensors

Great info! Do you have a video on the cluster putting a drain on the battery?

@jeffescortlx

2 жыл бұрын

Not for this year specifically no.

What oil did you use?

What type of oil do you use for the motor dampening? And do you have a link or some information for that "T" shaped soldering iron tip? That made the job look like a piece of cake!

@jeffescortlx

4 жыл бұрын

You want to use the heaviest oil you can push through a syurange. I'm using a heavy gear oil, I don't remember the weight off the top of my head. The soldering T tip is a hakko T-12/15 tip. You can purchase a genuine one directly from the hakko website.

I have a 2001 Silverado and once the truck is turned off all gauges go to their correct resting places. Keys removed and doors locked, about thirty seconds later a click under the dash and fuel gauge goes back to reading like truck is running. Upon unlocking door, fuel gauge jerks back down to the proper key off position. I do have a parasitic draw that will kill the battery. Do you think it's the cluster? All my gauges function properly when driving with no flickering or cutting out. Anyway, great video with precise details. Thanks for sharing your knowledge.

@jeffescortlx

7 ай бұрын

This video will be a better fit for you: kzread.info/dash/bejne/hHecu6WzaK_bh7w.htmlsi=zPkzWZ2OSPNaERBj

Very helpful video. What oil works best and where can I find a syringe with the correct size nozzle?

@jeffescortlx

Жыл бұрын

This video here has more information: kzread.info/dash/bejne/ppxqr5Kwd7a-p9o.html

What do u use for the oil?

Can you send me a link for the oil you use to lube the stepper motors

Para eso usted estudio, es un profeciónal d verdad. Only ask, what did you use after welding acid or another quimic. Thaks charlie from Puerto Rico

@jeffescortlx

4 жыл бұрын

I use rubbing alcohol to clean the flux off.

What oil is used to re fill the gauges??

You are brilliant

What oil do you use ?

Hello. You had asked if someone had a different issue with the fuel gauge. Well mine hasn’t quit completely it reads or is empty and bounces between the two like a bad ground. Thoughts?

@jeffescortlx

3 жыл бұрын

If it's only the fuel gauge acting up like that it's probably a problem at the sending unit.

Great video! Question, why didn’t you refurbish the other motors? Wouldn’t it make sense to do them at the same time as you did tach, speedo, fuel, and temp??? I mean... it’s like sending a transmission to get refurbished and the shop only changing what’s worn off and leaving what is still not fully worn off. I know I wouldn’t leave internal components that wear with use, while changing others that already wore out. Anyway, curious why not do them all since it’s just a lube change

@jeffescortlx

4 жыл бұрын

If the lube is already full, I wont add more. If you check your dip stick and it reads full, would you add more oil?

Jeff can you fix my cluster on my 2000 gmc Yukon XL .

Great vids Jeff... Quick question I've been dealing with for a few months now. Intermittently all the gauge needles will flicker back and forth... Along with all the lights that come on when the engine is initially started... Then it seems stop and run the ignition cycle while im driving and then everything will go normal for a while until it does it again... It all started when I changed the turn signal switch and put in a stereo system (same weekend) 2700w... Then installed 220 amp alt; 155 at idle... Installed Big 3... Still flickering... Im lost... I've tripple checked my work... Can you maybe send me in the right direction?

@jeffescortlx

3 жыл бұрын

kzread.info/dash/bejne/n3dlscawh7WspLQ.html

@lordsothis

2 жыл бұрын

@@jeffescortlx so, I re-soldered all the joints on the board where the connector attaches.. and can't believe it... after more that a few months, actually, of flickering and cleaning grounds, and running new grounds... not knowing what speed I was going... it finally works... the joints didn't look bad, but I redid them anyway... and wow like new... thanks a lot... really makes driving the truck enjoyable again.

hello you had a video that i had watched on a gauge cluster that you showed which part of it that would cause your battery to die could you please tell me what chip on there would cause that . i have a 2004 trailblazer .

@jeffescortlx

4 жыл бұрын

kzread.info/dash/bejne/iIyTlbusfrDclqw.html

Jeff how do I contact you if you are still doing cluster repair work? I can't seem to figure it out using my phone on the KZread app.

@jeffescortlx

Жыл бұрын

kzread.info/dash/bejne/hpNmudCDfdbAkbg.html

@jeffescortlx I re-filled the oil but the only gauge that springs back like yours did (RPM & Speedo) was my volts gauge; all the rest move and stay where ever I put them. Any idea what I'm doing wrong?

@jeffescortlx

3 жыл бұрын

Are you applying power?

@sogbryan6633

3 жыл бұрын

@@jeffescortlx No power. But I re-installed cluster after my message to you and the gauges are all in the wrong places and RPM still doing nothing. I will re-arrange needles and try again. RPM must be a different problem.. something before the cluster. Anyway, thanks again for your help! Much appreciated!!

Good video. My problem is the oil Guage. My needle was shaking when idle periodically so I just installed a gm oil sending unit and still seems a little jumpy or sticky. Can I pull the oil Guage motor and oil it then install or does it uave to be calibrated?

@jeffescortlx

2 жыл бұрын

Anytime a needle is pulled it has to be set correctly going back on.

What kind of soldering iron do you have? Does it come as a kit with the tips?

@jeffescortlx

4 жыл бұрын

This one here: kzread.info/dash/bejne/oGGOybGYcbK6nrQ.html

Hey, Jeff. I purchased an old RV with Chevy 8.1, and the fuel gauge had been always stuck at past full (3 o'clock position). I have changed the fuel pump module, and still the same. I wired directly from ECM to cluster instrument panel, and it reads about 2.15 volt with a half tank of gas. When I unplug the fuel module, then it reads 5 volt. I know my fuel level sensor is good and wiring is good, yet it still reads the past full. Does my cluster have issue? Is it normal that gas gauge reads about 2.15 volt half of gas tank full? Appreciate your help!

@calvin2681

Жыл бұрын

After unplugging the fuel pump module, it read 5 volt and stuck at 3 o'clock. With the fuel pump module plugged back, it read 2.15 volt and stuck at 2:45 position.

@jeffescortlx

Жыл бұрын

Depending on what year the chassis is, information from the ECM to the instrument cluster is data bus. So voltage reading wouldn't really be a reliable indication of few level. But typically the problem ends up being the wiring between the sending unit and the ECM. But again this is all year dependent.

Hey Jeff love the videos man. I have a 99-02 truck and recently bought a 99-02 cluster with trans temp gauge. My old mileage is stored on my old cluster, what’s the process on swapping my original miles onto my new cluster? Btw nothing was wrong with my old one i just wanted the temp gauge.

@jeffescortlx

3 жыл бұрын

You'll either need to send it to someone with a programmer or buy a programmer. Fixed until broken channel shows you how to edit the hex code if you want to tackle it yourself.

@ishramos2380

3 жыл бұрын

@@jeffescortlx Right on man!

@ThomasG812

2 жыл бұрын

@@jeffescortlx even if the fuel gauge seems to be reading correctly but is vibrating quickly in place?

Have you been posting more regular videos ? This is the first of yours I've received in a long while. Maybe that evil YT bot playing shenanigans again. BTW, may I ask what dampening fluid you're using ? At the factory, (Flexdrive Instruments Australia) way back in the day, we would use pure crystal clear silicone fluid of varying viscosity depending on the application. Flexdrive didn't make "aircore" since Flexdrive intruments were based on Stewart Warner. VDO made aircores and I always wondered how they got the fluid inside. I always figured the fluid was put into the sealed core prior to assembly. Never occurred to me to use a syringe to get the fluid in the aircore. See, old dogs do learn new tricks. I still use the silicone myself on mechanical instruments but it's way too viscose to use in a syringe. In any case, the silicone I have would be way to viscose for this application.

@jeffescortlx

4 жыл бұрын

I had a break in uploading for a while, so I can't blame KZread this time. I try to find the heaviest oil that can still get sucked through a syringe, the oil I'm using now is a little too light. I wish the motor could be taken apart, re-greased and reassembled, but rewinding the motor doesn't sound like fun : )

@ellesmerewildwood4858

4 жыл бұрын

@@jeffescortlx You're right, I have tried to unwind an aircore that had a broken spindle. I can attest to there being what seems to be a googleplex winds in each coil. At least there seems to be, I gave up unwinding it and chucked it in the bin. So RE-winding it would be darn near beyond the patience of any ordinary mortal. Thanks for the reply, the syringe trick is was a "WOW" moment for this old dog. :o)

@jeffescortlx

4 жыл бұрын

@@ellesmerewildwood4858 I did take one all the way apart one time, not much in it, just a disc and some dried up grease. I'm glad my video was helpful and thanks for your insight, it's nice to converse with other tech's familiar with cluster work.

Anyone know where to get or what brand makes the dampening oil

What sizes are the bulbs?

Hello Jeff, I already changed the oil & put a new oil pressure gauge on the motor & flushed the engine but, my oil gauge shows low pressure & the message center is telling me to check oil. Do you think I need to change the stepper motor air core on it?

@jeffescortlx

2 жыл бұрын

No. The position of the needle/motor has no effect on what the message center says. Sine both the needle and message center agree you have low pressure, the cluster is seeing a low pressure signal.

@MrAlonzogaze

2 жыл бұрын

Thank you for your advice 👍

I really enjoy your videos, great explanation on your work, but I have a question, could provide where do you buy the damping oil, i hope ingit the name right. Thanks.

Excellent video. What oil do these motors use?

@jeffescortlx

3 жыл бұрын

Check out "TheGalacticWest" comment below, this question has already been answered.

have learned a lot again thank you

where can i get the oil and that syringe? i have that similar cluster and my gauges are way off.

@jeffescortlx

2 ай бұрын

A lack of dampening oil will not affect the gauges accuracy. Even if all of the lube has dried up, it will still read correctly. It will just bounce as it moves. If you're gauges are very inaccurate then you have something else going on.

I'm having a problem with my 1999 silverado instrument gauge. When I'm driving my battery light will come on my gauges bottom out. If I hit my dash it will resume but fail again. What's your guess. I removed it to check my connection it seems to be tight

@jeffescortlx

Жыл бұрын

Probably a bad solder joint in the cluster if hitting the dashboard has an effect.

@peterdejoseph5197

Жыл бұрын

@@jeffescortlx I saw in one or your videos about a ground problem A8. I did another ground like you showed in the video and so far it's working

Thank you for the great video. I do have one question, which I don't believe was answered in any other comments or the video: What is the fixed resistor value you use for the oil gauge, or can you give the range so I/we can come up with our own logical test values? A 5 minute googling does not show this info, although perhaps I need to refine my queries... Thanks again!

@jeffescortlx

2 жыл бұрын

0 ohms = 0 psi. Open circuit points the needle to the far right (off scale ~120psi) 56 ohms = 55 psi.

@thechillhacker

2 жыл бұрын

@@jeffescortlx thank you very much. that's perfect

I've had an issue with mine with fuel gage when truck is full the gage would jump to empty. But I could tap dash and it would return to full. After running several miles it would not do it once off full. Then out of no where all at once the airbag, ABS lights are on, the trans temp gage not working, fuel gage on empty and the information Center flashes battery, security, low fuel when truck is off the security light stays on. I first thought it was the sending unit on fuel but if that was it why would it return when you tap the dash and now all the other issues?

@jeffescortlx

3 жыл бұрын

What year describing is what happens when the cluster can't see the serial bus data.

Which wire is the sending unit for fuel. I have a service truck which would be a cab and chassis 3500 that had duel tanks. It uses both tanks and sendong units to get a fuel gauge reading. Truck has had multiple sensong units. I replaced the front tank myself last year. Gauge would randomly go to empty and low fue message would be on. Now it has full tank of fuel and it is pegged on empty. I thought it was great because this has been an on going problem with this fuel gauge. Thought I might actually find the problem. So far I have not.

@jeffescortlx

3 жыл бұрын

The sending unit isn't wired directly to the cluster. It first goes to the ECU, then from there through the serial bus.