96 Yukon - Dash Gauge Cluster Repair - No more bouncing needles!
after watching a couple of other useful KZread videos I decided to tackle repairing the introduction of air into the little step motors for the fuel and the oil pressure gauge. when doing my research I always like to watch a few different videos to get different angles and perspectives and suggestions on how to do it so I figured I would make my own video as well.
Пікірлер: 17
Whoa. That's really great.
Going through similar issues. I appreciate the helpful info and taking time to make the video.
Sprayed mine with silicone spray real good works great
Oil gauge - pull needle off,🎉 hook up gauges to truck, turn on key, set gauge to 0 and you'll be set
What silicone grease do you use..? Is superlube grease ok ? I use silicone spray and it's working better on the fuel gauge but the oil pressure gauge is still erratic
could you please tell me the supplies you bought and where thanks
Ware did u buy the lubricant oil from
Can you ask your friend how to bypass that pin that " tickles " the alternator?
Replace them if you can find them...
Or can I use any type of oil.
Could you please leave a link or the name of the "oil" you used so I can do this to all my motors
@agustinmacias3401
Жыл бұрын
kzread.info/dash/bejne/l5ipu5abiJrYhbQ.html
@agustinmacias3401
Жыл бұрын
“Auto dampening silicon fluid”
What is the green light at the upper left what looks like a headlight symbol
@georgehurley-hd8kd
3 ай бұрын
Daytime running lights. Light goes out when lights turned on.
😴 ᵖʳᵒᵐᵒˢᵐ
I also call my gf my friend😂