99 Mustang Gets Kenne Bell Supercharger - Safe, Reliable BOOST!
Автокөліктер мен көлік құралдары
In this video, a customer's 2V 1999 Mustang receives a Kenne Bell Supercharger! This kit is emissions legal and will make 9 pounds of boost with the standard pulley. Watch along for a quick overview of the kit as well as a short test drive showing the drivability of the car with the supercharger installed. Contact us below for any information on installing a Kenne Bell on your car!
________________________________________________________________
If you enjoyed the video, please like and subscribe as it helps us out a ton! If you wish to be notified when I upload a new video, click the bell icon next to the subscribe button!
Shop Facebook page: / savageperformanceky
Shop Website: savageperformanceky.com
Shop Phone Number: (859) 817-0764
Follow the channel's/shop's Instagram page here: / savageperformanceky
Thanks to my vehicle sponsor:
Nitrous Express and Snow Performance - www.nitrousexpress.com/ - Use code "savage" at checkout for FREE shipping on any order!
Also, shoutout to these companies just for being awesome:
UPR Products - www.uprproducts.com/
Tin Soldier Racecars - tinsoldierracecars.com
SPEC Clutch - www.specclutch.com/
Пікірлер: 60
Great video and learned a lot from it! Thanks for sharing and u gained a new subscriber for sure!
Thank you for going over the hoses, currently putting on my intercooler for the kit and I was confused which hoses went where.
Great build once again guys.
@SavageProductionsCars
Жыл бұрын
Thanks!
Awesome video!!!
Just installed the same kit on my 02. Car is so much more fun to drive. Plenty of power now
@spoolinsvt6489
6 ай бұрын
Have you dyno’d it or gone to the track?
Cool ride !!!
@SavageProductionsCars
Жыл бұрын
Thanks!
My 02 GT with Trick Flow heads and a 2.1 inercooled KB put down 410 rwhp and 408 rwtq, only 8 psi.. I am very pleased with 3.90 gears w/ this set up. It pulls all the through 5 gear and cruises 75 mph at 1800 rpm. Of course a smaller pulley 14 to 15 psi and longtubes are coming. Cant wait..
@Freddy_Confetti
Ай бұрын
Probably still lose to a stock 03 cobra
I just picked up a used 04 GT with this kit. This video was VERY informative! Being as my car was from a widow there was almost no information with it. Thanks!!!
@juanmazon4746
11 ай бұрын
ik damn well u got a steal on the car
@rickt1c
11 ай бұрын
11k, 36k miles = ) @@juanmazon4746
@rickt1c
3 ай бұрын
@@juanmazon4746 10K!
Doing the same thing to my 01 cobra hoping to get around 400 to the wheels
Did you end up doing any kind of tuning after the install? Great build!
So you can’t use stock fuel lines on it even if you use the 1.7l supercharger
Very cool
@SavageProductionsCars
Жыл бұрын
Thanks!
Can I put a kenne bell on my p71 interceptor
What's the ballpark cost on that build ya'all did? Thanks in advance
Will this work on my automatic new edge?
can this work on automatic mustang
Love your videos can you put that kit on crownvic 2008
@brandonmiller318
10 ай бұрын
Sure can
What's the cost of this build?
I have the 2.6 KB on my 2010 GT 4.6 and absolutely love the blower! I like the channel guys!! I'm in need of forged internals and smaller pulley. Maybe you guys can help me out?
@SavageProductionsCars
11 ай бұрын
Give us a call!
Kenne Bell means top quality
Hey man awesome build I’m doing the same exact kit with on my 01 gt it’s automatic as well 9lb boost! But I’ve done the Eibach pro suspension kit with bilstein shocks and struts! I got 315/35 rear nitto nt555 tires so I believe that should help with traction! But the shop that’s installing my kb said I don’t need the boost and Air/fuel band ratio gauges right away, would you agree?
@SavageProductionsCars
Жыл бұрын
You don't need them, per se, but it's always good to know your AFR if you know how to read them. Seeing the boost on a boost gauge is also pretty cool and good to see.
@jadenm4198
Жыл бұрын
@@SavageProductionsCarsright on thank you for answering, I also have frpp 3.73s, new 31spline trac lok rear end, Kenny brown extreme matrix kit and a new fuel pump and filter!
Where can a fella find this kit? I have a 2000 GT that I just bought a few months ago, I’m currently doing a complete suspension rebuild and handling maintenance on it but I’m looking for ways to make more power down the line
@SavageProductionsCars
Жыл бұрын
You can purchase it from us and we can drop ship it! Our contact info is in the video description.
This is an awesome build guys, with so much torque on tap from the Kenne Bell blower, do you think the 3.27 gears would be best instead of 3.73 gears? Do you think that the owner would have problems with traction if he upgrades to the 3.73 gears, because I would love to do the same setup to my 2006 Crown Victoria Police Interceptor and I also have 3.27 gears.
@SavageProductionsCars
Жыл бұрын
The car needs some suspension, but mainly a good tire with how much power it makes. A good tire, suspension, and 3.73 gears will make for a better combination for traction than his current setup with the 3.27s. We told him he shouldn't do gears without a tire, cuz as you said, traction will be even more of an issue.
@krownvikkhris3004
Жыл бұрын
@@SavageProductionsCars okay that's some great information, so with a 3.73 gear what size tire would you guys recommend far as width and height?
@SavageProductionsCars
Жыл бұрын
@@krownvikkhris3004 I'd do some research about your specific car, but generally speaking, a 275 radial on a 15" wheel is the go-to. I think some guys run a 305/45 R18 on theirs.
@krownvikkhris3004
Жыл бұрын
@@SavageProductionsCars okay because currently I have 235 55 17 on my car now, which is a 27 inch tire
@NewEdgeDesigns
10 ай бұрын
305 or 315/35/18 would be great
Boosted 99
That’s gotta be the smallest kenne
We have a power pipe for those ;)
@SavageProductionsCars
Жыл бұрын
Missed opportunity! He'll be coming back. Maybe we can do some convincing. Haha
Where is your shop located?? How much is an install like this??
@SavageProductionsCars
6 ай бұрын
Hebron, KY, just south of Cincinnati, OH.
Would 4.10 gears be to much for this setup?
@SavageProductionsCars
Жыл бұрын
Not at the safer boost levels here, no
@Adam_S281
Жыл бұрын
Too much for a boosted 2v. 3.73 would be better
@midnight347
Жыл бұрын
@Garsnow this is horse shit. I run 4.10 on a 740/730 rwhp/rwtq 07 gt500 with a 2650 tvs. I will admit I have trouble getting 100% traction in 2nd with 325 et street r 15s and I may go taller on gears but I'm going to built suspension first see if that helps. At a low boost 2v power level 4.10 will be fine the 4.10 worked awesome with drag radials on the stock blower it was bolt ons had 550 rwhp. Gt500 is heavier but also had good bit more power than a low boost 2v. A stock motor 2v be fine with 4.10 just gonna need drag radials. And yes I mean with boost.
@brandonmiller318
10 ай бұрын
@@Adam_S281 def not especially being a auto car. 4r70w has a wide ratio
How long will it last . Better prepped that bottom end . If not it will go boom in time
@SavageProductionsCars
9 ай бұрын
It's on low boost and should survive a very long time.
@spitfiregaming4476
22 күн бұрын
@@SavageProductionsCarsit will it’s a 4.6 gotta be more worried about the trans
Will this kit work with my stock 99 cobra?
@SavageProductionsCars
Жыл бұрын
Of course!
@ag3116
Жыл бұрын
@@SavageProductionsCars I went to your link in description to see about getting a supercharger for my 4v 1999 cobra
@SavageProductionsCars
Жыл бұрын
@ag3116 the best way to reach us is via phone call or Facebook message.
@d.l.9517
8 ай бұрын
KB should sell the upgrade kit for your Cobra.