Note: On ALL air hoses and vapor hoses be sure to add some copper/steel wool, or hose clamp some metal bug screen on the hose end to act as a flashback arrestor. Safety first!

@bombasticbuster9340

2 жыл бұрын

Thats a good suggestion. Same for HHO.

@doubleooh7337

11 ай бұрын

Or just get some flashback arrestors

It will work that's how a propane system works it runs just fine I like your set up

I made one of these a long time ago for a moped. It ran great but the problem I encountered was after awhile the gas would get ice cold and stop producing vapor. So with a car I’d wrap the heater core tubing around the tank and maybe that’d do better? I got excited and sent letters to everyone in “green” organizations. I ended up getting followed a lot so I abandoned it.

@amirelsabah4312

Жыл бұрын

My friend, international organizations only care about shawaz and feminists. They are Freemasonry and the hidden interests of the world government. Oil companies will be harmed by such innovations. Even if the end of the world is the most important thing for them, reaching the golden billion. We are just a herd. We have to unite to confront the wolves.

I might have a cxouple of suggestions that will improve your setup. My brother and his friend made a headgasket with four sets of platinum points equally mounted around the cylinder. It was layered in between the gasket material like a circuit board. So instead of firing from the spark plug it fired from each set of points. The platinum points had no place to hold any carbon build up so would not foul out like a spark plug. and firing the gas mixture with four sets of spark burned the fuel vapor quicker and more completely.(old airplanes had two sparkplugs per cylinder) Giving an increase of power with less fuel consumtion and less emissions. My idea to add to this is to reduce fuel droplet size thus increasing surface area of the fuel by using an ultrasonic mister which instantly vaporizes a drop of liquid to a finer mist than a carburator is capable of. This should also increase power while decreasing consumption andEmmisions. The reason you do not see this gasket method of spark on the market now is a sparkplug company bought their patent. Their was a drawback to the design they had not worked out at the time and that was that the gasket was thicker and you had to torque it down just right or it would blow the gasket. But this was 40 years ago and we have much better materials to work with now. I really hope you read this or anyone else . It could be an easy add on for cars well worth the cost for the increased economy and decrease of emmisions. Hopefully give a little more time for the transition to the totally electric cars that are coming. Jake The Snake Was interested in the gasket for his race cars as it would have been a huge advantage. So if you need an investor you might want to try him. It also goes to show how money trumps humanityand that big corporations (Firestone) are more concerned with the bottom line than reducing polution to save mankind. We really need to institute a crimes against humanity law for people like that and Big Pharma who suppress or overprice discoveries that benefit life.. Please send a comment should you read this. I like to think I am at least trying yo help.

@45acp

Жыл бұрын

I abandoned the concept after realizing the amount of money I would have to spend making this a viable option for daily driving.

@ronwerner

Жыл бұрын

I read this and it makes sense. Just adding the ultrasonics to the fuel would improve performance. We don't need 300hp engines anyway, 100hp at 40-50mpg will get us where we need to go. If govts were REALLY serious about this carbon issue we would start to see more innovations like this rather than cars with big screens and wifi etc.

My dumb stoner brain sees this and thinks "oh, so it works like a bong"

@45acp

2 жыл бұрын

Exactly. But, it failed to keep up with the demand of the engine.

@RussellBrosGarage

2 жыл бұрын

Maybe a mixture of both? That way when it needs gas flow it has it, but on flat land use vapor

@forg9543

2 жыл бұрын

i’m high asf watching theses type vids also

Great job! The only thing you are missing is an inline T with a valve, this would allow you to reduce the vapor production by adding air before the engine and fine tune the mix.. ie: 14:1. Cheers from Canada.

@64fairlane305

2 жыл бұрын

14:1? And 100mpg?

@forceescape3335

Жыл бұрын

Would anybody actually wanna continue this idea ????

@forceescape3335

Жыл бұрын

Even have the exact same truck 😂

@doubleooh7337

11 ай бұрын

More like 50:1

@doubleooh7337

11 ай бұрын

​@@64fairlane305just as 1litre of water turns into 1250L of steam, 1L of fuel vaporises into 1,750L gas, with 1,750x as much, what do you think the mpg difference is?

the good test will be see how it performs under load

Great work. Keep it up

Charles Pouge from Canada was the 1st to do this 70-80 yrs ago.

@64fairlane305

2 жыл бұрын

So Tom Ogle reinvented it?

Thank you for your great advice

Just like running a engine on propane it's using vapor you can take a propane kit and retune for gasoline propane and gasoline are also excellent refrigerants but highly explosive

JUST AWESOME DUDE!!!!!!!!!!!!!! KUDOS

All that does work, just hafta find a way to build a safe system, so you dont burn it down, save gas for sure, stay safe ,

SO WHAT IS YOUR POINT......DRIVE IT AND SHOW US HOW MUCH FUEL YOU SAVE PER MILE!!!!!

@45acp

Жыл бұрын

The only point was to see if it was possible to do on a fuel injected engine. I never did a full test drive because the amount of time and materials it would take to build a suitable system was more than I'm willing to invest. The truck did move using the mock system until the vacuum crushed the containers.

Supposedly you can just heat your fuel filter with a $20 filter heater and add 3oz acetone per 10 gallons of fuel. No bottles needed

Are you still checking comments? Have you done anything else with this type of setup? And have you done any mileage testing of your own? With gas going up to insane levels, I'm strongly considering doing one of these vapor setups. I'm an automotive technician. Surprisingly I have not tried this yet. But I definitely will be trying it on my generator for the test model and go from there. If I have success, I'll work on building an entire fuel/vapor system for our daily car.

@45acp

2 жыл бұрын

I tried to drive on the setup and failed miserably. It collapsed the containers immediately. So my thinking is, a thick metal or round glass container would be recommended.

Nice I like your setup I want to try it on my 2004 dodge Dakota slt Just waiting for your test drive video I hope she runs good on the the road especially on the high way anyway let me know when your ready for your vapor fume test drive God Bless you for sharing your video I gave you a thumbs up

@45acp

3 жыл бұрын

Well the test drive never happened. The plastic containers collapsed as soon as I hit the throttle. In order to try a test drive I’d have to build a metal tank.

I don't think those hoses and the tank are designed to have gas in them, they will probably start to fall apart

@45acp

Жыл бұрын

It was only for proof of concept.

It does work and u get 60 present more milage

Acetone mixed in with gas makes it evaporate faster

It can run, but will it have power? And can you drive it?

Really Work? Without original gasoline tank of the vehicle. Thanks

And what about gas temperature when it will colder the engine will turn off??

How can I use vapor with fuel pump?

That's pretty cool and all but I have only one question.... before you drive how are you going to let the hood down with all those containers.....

@45acp

2 жыл бұрын

This video was proof of concept, that it would run on vapor. For a test drive the hood was removed.

@TheKatanaNight

2 жыл бұрын

Did you hear that? "Hood was removed". Duh. 🤣

that is so dangerous since that gas tank placed into engine bay. anytime can explode when it heated

Project Farm ran a side by side comparison with a lawn mower that ran on vapor only and one with normal carburetor......AND, the savings was negligible Not worth the hype

@45acp

2 жыл бұрын

I saw that video.

Isn’t that called running lean? The engine will not last very long surely? Fuel systems in Japanese cars in particular actually use the fuel to cool the head of the piston preventing detonation, blowing a hole in the piston head. Besides that it is dangerous as fuck!

Soooooooo...this is a gasoline bong???

@45acp

Жыл бұрын

🤣🤣🤣 Pretty much.

Use pvc piping

hi, hope u noticed how danger it was at that time, we seen that, that was 4 years ago, hope u had an arrestor, for back fire, need to make that, hope u noticed ,or somone told ya, for safeties sake loll, i use 3"'inch bore with aluminum needles, looks like spikes, or hollow needle, looks like tube shrinkers, hope i explaned well as it's not my mother lingo loll,

So what are plans for a metal tank

@45acp

2 жыл бұрын

I gave up on the vapor idea due to other things going on. I might revisit the idea at a later date.

@TravisTellsTruths

2 жыл бұрын

@@45acp good. You should.

@TravisTellsTruths

2 жыл бұрын

Bro. I've been studying this. You are very close to achieving the first stage. Few people achieve the first stage. You can do it. Of course the plastic weak containers won't hold up to negative 10 or 15+ of psi. You need simply... harder plastic... hdpe holds gasoline.

no updated video ?

@45acp

2 жыл бұрын

No, I didn't do any update video. The containers used collapsed during the acceleration attempt. It would've needed a metal tank or cylindrical tank built and I didn't have the tools or materials to do so.

have you figured out how much fuel saved this way

@45acp

2 жыл бұрын

No. The attempt was abandoned after the containers collapsed when trying to accelerate in gear.

@duh-ff

2 жыл бұрын

@@45acp why would you abandoned it and not just get some good metal tanks for it? I abandoned mine because I was being followed by suits, and mine was just on a moped. But the suction wasn’t near that of a v8. If I can get another cheap moped I’ll make another.

@keithc8108

10 ай бұрын

​@@duh-ffwhat kind of car was the suits driving?

What gas did you use? LP gas or Hydrogen Gas?

@45acp

2 жыл бұрын

Regular gas 87 octane.

Wow, a carburetor... what an amazing discovery, lol

Lol

God damn you care what them internet bots say to much lol