Couldn’t help but laugh! I watched this right after sanding my piece for a redo because I just couldn’t leave my resin wave alone! Glad to know I’m not alone out there. And your board turned out beautiful!

@Procrastipainter

2 жыл бұрын

Ha you're definitely not alone! Thanks for your kind words and for watching 🥰💙

I'm trying not to laugh at you, but you know I'm laughing at you - love you girl x

@Procrastipainter

2 жыл бұрын

Hey I'm laughing WITH you at Past Liz. That chick thinks she knows better 🤣

@HijinxStudios2020

2 жыл бұрын

@@Procrastipainter If it makes you feel better - I had a f**k up today ;)

@Procrastipainter

2 жыл бұрын

Aww nooo! Well, it happens to everyone, doesn't it

brilliant save!

It turned out in the end. 👍🏻👍🏻

@Procrastipainter

2 жыл бұрын

Aww thanks 🥰💙

Thank you for showing how you saved it! I swear sometimes I spend more time fixing my mistakes than I actually do making the piece.

@Procrastipainter

2 жыл бұрын

URGH! I know exactly what you mean. From now on, I'm gonna let my "mistakes" live, and just do another wave 😆 thanks for watching!

OMG YOU MADE MY DAY! LOL if you know you know.

@Procrastipainter

Жыл бұрын

😂😂 YAS! I'm glad I made your day 🥰💙

Thank you. 🌸

@Procrastipainter

2 жыл бұрын

Thanks for watching 😁💙

Great Save! This one made you work for it with gorgeous results! Love the Grazing board. Haven’t see a design like that before!!

@Procrastipainter

2 жыл бұрын

Thanks for your kind words and for watching 🥰💙

Lmao I was like no stop lol it turned out fine lol

@Procrastipainter

2 жыл бұрын

Hahaha yeah me too! Thanks 🥰💙

whooop whoop first comment! that never happens! love that lacing...amazing work as always!

@Procrastipainter

2 жыл бұрын

Lol congratulations on first comment 😆 thanks for watching and for your kind words 🥰💙

lol, oh boy, we've all been there!! nice recovery though!!! looked fab in the end!

@Procrastipainter

2 жыл бұрын

Haha and I'm sure I'll do it again 😆 thank you 🥰💙

Look great🥰🔥👏🏻

@Procrastipainter

2 жыл бұрын

Thanks 🥰💙

OMG your lacing on this one is amazing Liz. I still cant get lacing like that haha but Im having a ball now I can do resin waves at all

@Procrastipainter

2 жыл бұрын

Aww thank you so much for your kind words (here and in ATD) 🥰💙 I swear it's just a bunch of trying and learning what does and doesn't work. If I sat my first few waves next to ones from today I wouldn't even say they were done by the same person! Now you see what I mean by feeling invincible when you finally get it to work 😁 keep up the great work!

I Appreciate The Video's That Show Us What NOT To do. ; ) could You Do A Video On Your Set Up and Clean Up , Also Are The Boards Treated With Any Thing Before And Arfter The Resin Pour

@Procrastipainter

2 жыл бұрын

Oooh I might have to write that down, thanks. Obviously it depends on what the plan is as to if a board is primed or not. This video I painted them with water based varnish.

@debthompson534

Жыл бұрын

@@Procrastipainter Hi, loving your videos, new to your channel. I just wanted to ask, do you put a Food Safe top coat over your resin part when using it for chopping boards etc?

@Procrastipainter

Жыл бұрын

Hi Deb, welcome 🥰 Yes the DiamondCote resin is considered food safe for incidental contact as long as there's no pigment added. So I put a clear coat over the resin on serving boards

You’re definitely one of my favourite resin wave creators! I’ve really been struggling with mine recently, really struggling with getting nice cells. Could I ask, how powerful and how much heat do you have on your blow gun? And is it better to have less resin on your piece before blowing out your white or more? Your work is amazing 😊

@Procrastipainter

2 жыл бұрын

Thank you so much for your kind words and for watching 🥰💙 my heat gun is 220V 2000W 60-650 C. I usually use it at half heat, and use either high or low flow. As for how much resin, I wait for it to settle. That way when you do the white it doesn't move so much and your cells stay put. I hope this helps. Best of luck!

@THDSCornwall

2 жыл бұрын

@@Procrastipainter ahh thanks, I’ll keep practicing with your tips 😊 have a wonderful day

@Procrastipainter

2 жыл бұрын

Let me know how you go 😉 you have a great day too

Ok so I'm just starting making epoxy projects. I've watched a lot of your videos and I hate you for your consistent lacing in your sea foam lol. I'm struggling so bad w this. Would you mind telling me what white you use and your mixing ratio with it? Any advise and tips would be greatly appreciated. Thank you and best regards... Shawn. Btw....I don't hate you lol...I love your work

@Procrastipainter

Жыл бұрын

Hi Shawn, thanks for watching! As for tips, there's a bunch of tips scattered through my videos and lots of specific help if you check the comments. All pigments and resin I use are in the description box of each video, I don't measure how much I use so can't give you a ratio. Generally I just-cover the bottom of a plastic cup and use as much white as you see in the video. Unfortunately I can't give you much help without knowing what your specific problem is, but generally waiting for your resin to get the consistency of thick honey will help you KEEP cells. Check out video #21 for a quick how-to (it's an old video now but should help). Best of luck!

It's just awesome ma'am from where you bought this gun can you please give the link and details

@Procrastipainter

2 жыл бұрын

Thank you 🥰💙 the heat gun had no brand, it was from eBay. But the link doesn't exist anymore (I had it on an older video but they must have sold out)

What temperature do you keep your gun on when blowing the waves?

Awesome 👏 How do you get such beautiful lacing? I bought the products you use but so far no lacing, I’m doing something wrong….any suggestions please?

@Procrastipainter

Жыл бұрын

Thanks for watching and for your kind words 🥰💙 can you describe what you ARE getting? It's a bit hard to troubleshoot without any info 😉

@lynnoble8229

Жыл бұрын

Thank you so much for taking the time to respond to my query 🤗 My white jr resin wisps over the blue without making cells or very little. I even tried a light spray of alcohol ink. Perhaps the jr titanium white is too thick?

@Procrastipainter

Жыл бұрын

🤔 if it's wispy for me, that usually means I used too much heat or too many passes. Are you too high on the heat gun or too much torching? Too much heat makes the white swirl and mix in before it gets a chance to cell. What heat do you have your heart gun on? Another thing might be that you need to not dig down with the heat gun. Think of it like you're trying to blow a thin curtain of white over the top, so have your heat gun as flat to your surface as possible. Hopefully some of that helps!

hello teacher, I continue to watch the ocean effects at full speed. I don't comment anymore because I write a lot, I kept quiet so that he wouldn't hate me.😊 when will you try the ocean mantle that Justres just released while doing the wave effect. We look forward to your comments about the product.

@Procrastipainter

2 жыл бұрын

Hi Emre! It's been a long time since you last commented. I thought you had stopped watching altogether. I don't have as much time to play with resin this year so there is a lot more time between videos. Do you mean OceanCote? Nice to hear from you 😁

@emresahin7627

2 жыл бұрын

MASTER. I never stop watching each of his posts over and over. I experience different things each time. I never unfollowed, I just stopped commenting. master erica just created unique wave effects with the newly launched oceancoat product of resin. I couldn't believe my eyes, the effects were incredible. I could not have imagined that this new product would create such an effect. If it's real and these effects are caused by this new resin, I think the ocean effect has been revolutionized in effects. I wonder if you have had a chance to use it. what kind of product

@emresahin7627

2 жыл бұрын

kzread.info/dash/bejne/fXmCq8VxZ5jYnrg.html

@emresahin7627

2 жыл бұрын

I wrote the link of this video, master will show the dry version of a previous application he made with oceancoat in the 18th minute. please just take a look at the effect.

@Procrastipainter

2 жыл бұрын

I haven't had a chance to watch much of anything lately. I don't think your link showed up?

😂 you’re so funny!!😂 nice to see that a wave pro like you also can make mistakes. I’m still struggling with the wave but guess it will work someday🤬 Are you keeping your heat gun on low?

@Procrastipainter

2 жыл бұрын

😆 Just keep trying and one day it'll click. I had my heat gun at about half heat and high blow for this one. Sending you good vibes for your next attempt 💙

@stinna75

2 жыл бұрын

@@Procrastipainter I will - thank you😄👍

@Procrastipainter

2 жыл бұрын

Good luck

I am a total newbie and am making a charcuterie board. I have the back all taped,and sanded the top. I think I’ll only be using the handle end and about 1/3 of the way up he board. After I am finished and the piece is totally cured, how do I finish the rest of the board since I sanded to complete surface? A matte polyurethane?

@Procrastipainter

Жыл бұрын

Ok so I typically will seal the section I'm planning to put resin on with either paint and prime (if you want it white) or an acrylic varnish (to see the timber). When finished, I rub some chopping board oil everywhere there isn't resin. I hope that helps!

@workhardeveryday1981

Жыл бұрын

Walrus oil is the best for this. Just make sure you pop the grain by spraying it with water then let air completely dry. Sand with 220 grit smooth again. Then apply the walrus oil.

Can I use only alcool ink and resin?

@Procrastipainter

2 жыл бұрын

You can, yes. Although the colour may fade quite quickly depending on what you use. Look up the colour fastness of your pigment to know how easily it will fade/ change colour

You Won.....