That moment when you understand that despite your 30 years of experience in your fully equipped garage, you ll stay a rookie in front of him... I'm admirative for him. God bless him , God bless all elders still working .

@petergreen5337

2 жыл бұрын

Ameen

@yannickl5976

2 жыл бұрын

I know well these tractors, there are yet many of them here in France (they were called "Someca" instead of "New Holland" and I have repaired many clutches on them. I don't think I am a rookie even in front of him.... But yes he is experienced, and he's doing well. And always working despite beeing 90 years old..............(is he really so old?..) I'm surprised that these old tractors produced since 1968 are in such a good condition. Some years ago our french farmers were not so careful with their Someca's.

@darshankumar-bx1001

2 жыл бұрын

It's 40 years experience 👍👌

@natrachannel4879

2 жыл бұрын

👆🙏💌🇲🇨👍kzread.info/dron/1NaglOq5OaSHiFdkCKsFHA.html

Looks like the transmission oil seal was not replaced, which was the reason for the clutch failure (slipping) in the first place ( clutch discs appeared not worn down to the rivets, bit oil soaked). Transmission input shaft and bearing should be checked too, as excess play and wear can lead to seal failure.

@georgedoorley5628

2 жыл бұрын

thought that also that the discs were not worn .......was always told not to pull the 2 halfs together with the bolts that to use the bolts as guides only and not to force it back together .........

The engineering college he has graduated from is called "Experience". Experience is a bad teacher, first it punishes then it teaches. Huge admiration for this man.

@darshankumar-bx1001

2 жыл бұрын

I love mechanical engineering I respect mechanical engineering works 👍💪⚙️🛠️🔧🔩💪⚙️🛠️⚙️🛠️⚙️🛠️⚙️🛠️⚙️🛠️🔧🔩💪⚙️

@natrachannel4879

2 жыл бұрын

🇲🇨💌🙏👆kzread.info/dron/1NaglOq5OaSHiFdkCKsFHA.html

Dada ji you got to be kidding me, what I mean he's 90 year old still have a work capacity better than many young mechanics I bet, eye visibility strength is phenomenal dada and well known in how to dis-assemble parts and to reinstall them back, that's where experience of years come in frame and perfection too, DIL SE SALUTE h DADA G ko, much appreciated 👍 🙏

Всё на коленьках делают и не жалуются что у них нет условий, молодцы!!!

@shuhratsobirov8358

2 жыл бұрын

У них нет морозов. Они бы тоже жаловались что нет теплого помещения. Сухо тепло работай и радуйся.

If he started work at 10 years old that means hes got 70yrs experience. I like the way hes rejected the use of speeding up with a powertool. His favourite old spanner does well 🙏❤️🙏 So, that means that this could be the 840th time that hes done this job at one a month. Or, if hes done one a week thats his 3,360th clutch!!

El montaje del volante en el torno para ser desvastado... es clave. El jovencito no tomó medidas para obtener un ángulo ''cero'' de la superficie del plato.... solamente lo hizo a ''ojo''. Imposible que haya quedado correcto y nivelado el desvastado. Cuando lo pongan en marcha producirá vibraciones mientras se suelta el pedal del embrague.

@natrachannel4879

2 жыл бұрын

👍🇲🇨💌🙏👆kzread.info/dron/1NaglOq5OaSHiFdkCKsFHA.html

@sudhirnaik4751

Ай бұрын

Ahh but the gentleman made sure he aligned the part the same way it came off the housing, does this negate that happening?

Excelente, mis felicitaciones para estas personas tan trabajadoras. Saludos

@natrachannel4879

2 жыл бұрын

👆🙏💌🇲🇨👍kzread.info/dron/1NaglOq5OaSHiFdkCKsFHA.html

So respect baba ji doing great job .very experience with his job weldone....from UK

@darshankumar-bx1001

2 жыл бұрын

I love mechanical engineering I respect mechanical engineering works 👍💪⚙️🛠️🔧🔩💪💪🛠️⚙️🔧🔩💪

90 years in Lunar calendar equal to 87 years of Gregorian calendar. Still looks fit for an 87 years old mechanic. Masya Allah

You are a good one hope you have many more years young one couldn't do it well done enjoy thank you

And the reason he made it to 90 and will make it even farther is because he maintains a purpose in his life.

He is only 63 years old.... Nd have a best experience.... May live long 4ever..,..

Интиресно посмотреть,как эти Мужики ( с большой буквы) востанавливают двухмассовые маховики ..

Excellent job love from new york usa

You have my respect sir. Mechanic we are. I wish my dad was alive

@janqasim8671

2 жыл бұрын

R.i.p. to your dad bro.

@joaquintamunozsoli1617

2 жыл бұрын

Muy guarros

Ustad rafeeq talagang

Excellent job. Thank you for the video.

Excellent reportage 👍👍👍🇫🇷🇫🇷

Un abrazo fuerte y un Dios que me lo cuide mucho maestro conozco esa profesión con tractores agrícolas no es de niños 🌄

Still 'young' and active, knowledge n experience.. dedicated n focused helpful people with him too..nice presente video 😎✌️🤙🦾Kia ora 🙏✌️👍

SALAM Machallah Many greetings from Morocco🇲🇦This is the real engineering school👍👍💪👏 I would recommend john deer mechanics to take a lesson from this video

@yannickl5976

2 жыл бұрын

Soory, but it's not a lesson. They are doing their best, they are good workers but they clean almost nothing, they never use a torque wrench when it's needed, they do their repairs on a dusty ground, and this old tractor is not complicated and easy to repair.

This Uncle is Gold.

How about cleaning the crap out the bell housing ,cleaning and greasing the rusty release bearing, greasing the splines on the input shaft and greasing the input shaft end where it goes into the crank bearing before putting it back together

@zanelile8192

2 жыл бұрын

His job was to work on the clutch not clean the engine & parts. On construction jobs carpenters work in very trashy, crowded places , they have told me we are hired to do carpenter work, not clean floor's.To each his own.

@BondWarrior

2 жыл бұрын

@@zanelile8192 if you going to do a job, do it properly or don’t do it at all, you need to learn to take pride in your work, two wrongs don’t make a right, just because one sheep jumps in a fire doesn’t mean all the rest have to!!

No way that guy is 90 yrs old.

My respect for all this men who work and do the best they can without lotta tools because I don’t see air tools impact guns pressure washers and all the equipment the people have here in USA but they still work and don’t come up with the lot excuses like here in US that we have everything but we complain too much and we wind too much for everything we have to teach our sons and daughters to work hard and learn how America was built not smoking pot or being lazy at home all day long waiting for PAPÁ BAIDAN to send money

3:55 I thought he is hungry and will eat a pizza 🍕😂😂😂

Un buen trabajo Pero faltó engrasar la flecha Y entro muy forzada Saludos de mecatrónic 🇲🇽

I never saw him put a splined shaft to align the center of the clutch before sliding the tractor halves together and then pulling it together with bolts. Never use bolts to pull a clutch together. It should slide right together by hand.

Мне кажется для них трудностей нет. Риспект!

As an italian from a rural area, I've seen so many Fiat tractors this video gave me ptsd

Very good beautifully good sir beautiful

Well done 👍 man

Just like always a half done job.

Wonder...... Appreciate🙏

Great job

Fiat ❤ super motor

Walau sudah tua ..tetap semangat..🙏👍🏻

Why wasn’t the outside clutch plate change as well I have only changed single disk clutch before so this is all new to me grate video

@georgedoorley5628

2 жыл бұрын

the outside one is the pto clutch and they very seldom get replaced as they do not ware out on a fiat of that size as they are over engineered for that tractor . hp ..........

Sab best old man

your job is perfect and good but you should be fixed on the table in clean and nice in pakestan all mecanic work on the floor ..Earth

Good Work

Good work

That dude is in his 70s TOPS.

1 question!!!😎 if u did all that work why didn’t u resurfaced the flywheel?🤔. That’s the main thing 👍👍👍💪💪💪 that’s where u get all the power from!!!! 💪💪

@georgedoorley5628

2 жыл бұрын

fiat clutch is different .........the pto clutch sits next the fly wheel and very seldom is worn ........the transmission clutch is inside the unit that was taken apart and was cleaned up on the lathe ...........

@stanmendoza638

2 жыл бұрын

@@georgedoorley5628 😱🥴👍👍

Indian masters the best👍👍👍

@wilsonaranha2980

2 жыл бұрын

I think it's Pakistan

@zulfqarshah6444

2 жыл бұрын

Iam certain these talented craftsmen are from the pakistan...

Good job

superb

So this is the new trend: Clickbaiting with weird age statements. "112 year old man repairs rocket"

at 8.53 we see both shafts, inner and outder are used. Transmissio seal leaking oil.

Чему так все рады ,пишут хорошая работа и тд,они даже колокол не помыли перед сборкой,всем и каждому кто е6ать как рад таких механиков

@user-ik1bs8jr3h

2 жыл бұрын

О том же смотрю и думаю, все в песке, не отмыли, хотя бы воздухом песок сдули

GOD BLESS HIM

Geo Baba G..

v nice

Bad idea to try to pull tractor together with bolts. Can bend clutch disks.

Super Men 👍

Excellent work done

Где взять такую картонку для регулировки сцепления?

Old man,old school.

Thanks all of you that your likes and lot of appreciation. Love you all

Expiriance is the Father of visdom.

Mechanic is great Kharadia line is not creaked

saludos

bravo ok

Mantap👍👍👍👍👍🇲🇨🇲🇨🇲🇨💌💌💌💌🙏🙏🙏🙏

M gusta el jack o gato

Wow

I can’t believe these guys don’t use ratchets.

@chestervaldes7551

2 жыл бұрын

I can imagine how much more productive they could be with flex head ratchets and swivel sockets. Maybe such things get clogged and jam up from working on the dusty ground.

Двигатель и гидравлика без подтёков

Omg no air compressor or air tool my hole life I said imagine working on cars with no air tools and I’m 53

what do you have with the sound...?, at least you yourself listened during the editing, if you do, bring it to the end!

❤️❤️❤️👍👍👍

He's no nearer 90 than I am. Would it have really been too much trouble to hose the sand off?

they have to clean the soil around of gearbox to avoid pouring inside

@chestervaldes7551

2 жыл бұрын

Don't worry, only a little sand went in- nothing to worry about.

👍

65 years old !!!

Well done for his age but it's bad the mashing and not cleaning the fixing

Шайба на пальце золото???

Not 90 years old for sure, he is 50 but looks older

90 years man! Or 63 years old male?😁

@amazingtechnology0007

2 жыл бұрын

😀

I love mechanical engineering I respect mechanical engineering works 👍💪⚙️🛠️🔧🔩💪⚙️🛠️🔧🔩💪

Токаришку не научили палкой биение замерять

Kitni labor hai clutch plate daalne ki

Is the tractor 90 years old or the man? None look a day over 89 🤔

@amazingtechnology0007

2 жыл бұрын

😀

@TsunauticusIV

2 жыл бұрын

The man is 70 TOPS. No way is he 90. Nooo way

@Goldsteinphoto

2 жыл бұрын

90 in Pakistani years = 65 US years.

@georgedoorley5628

2 жыл бұрын

tractor from the 70s .............man in late 60s i reckon ..........he is still well able to do a good dayswork .......

c'est du bricolage et non de la mécanique dans les régles de l'art

الدقيقه ١٠ غلط لازيم لحلو يجمع

Donner moi la position des dois de la plateau si le plateau est Monter,aussi elle ne pas monter

It just wold be better id some cleaning and applying greece

not 90. 65 to70 years old

@amazingtechnology0007

2 жыл бұрын

Its confirm 90 year old Dear

@TsunauticusIV

2 жыл бұрын

Man is 70 TOPS. NOT 90

@georgedoorley5628

2 жыл бұрын

@@TsunauticusIV even if he is near 70 he still not over the hill yet ..........

I,m 20years non profesinal 💪💪💪💪

Where he is from

@imranavaan6316

2 жыл бұрын

Pakistan

Sad news everyone, the old man died. But the good news is the maggots say he tastes great. Allah bless 🙌 ❤

Cand dumneata vei fi sardo io subito diventero prete!!!

more like 60 years old

How can i order the spair parts of this fiat tractor,. Im from palawan philippines..

@Techhowtodoit

2 жыл бұрын

They recently started Amazon in pakistan soon you gonna order anything from Amazon pakistan.

@kabagaytv3310

2 жыл бұрын

@@Techhowtodoit hope can I order soon.. can you send to me the exact website or online selling store. Thank you

@5.43v

2 жыл бұрын

@@kabagaytv3310 google

@gangisspawn1

2 жыл бұрын

How do you own a tractor and internet but have to ask YT for parts?

I know him. Baba rafeeq mistri in talagang. He is not 90 year old...

i want no this lathe machine opretar

Caps,helmets

Блін невже важко помити трактор перед тим як розбирати???

@aleckaleck2492

2 жыл бұрын

Мойка денег стоит, а с деньгами в Пакистане туго пока.

I don't know is this technology??ㅡㅡ

@chestervaldes7551

2 жыл бұрын

It's amazing 100 year old technology.

@benefitsimmigrantfreedomfr7650

2 жыл бұрын

@@chestervaldes7551 yes, but something doing wrong.....