8th Generation Honda Accord Valve Cover Gasket Replacement

Video short demonstrating how to replace a valve cover gasket on an 8th generation Honda Accord/Inspire equipped with the K24 2.4 liter I-vtec 4 cylinder motor.
Covers model years 2008-2011 wit the K24 4 cylinder I-vtec motor.

Пікірлер: 19

  • @k_escobar917
    @k_escobar9178 ай бұрын

    Appreciate the video man! Shop wanted $275 to do this job

  • @johnw3379
    @johnw3379 Жыл бұрын

    Very good information in this video. I just did the same job in my Element.

  • @piercedasian

    @piercedasian

    Жыл бұрын

    Glad it was helpful!

  • @rgk9495
    @rgk9495 Жыл бұрын

    Excellent video.

  • @piercedasian

    @piercedasian

    Жыл бұрын

    Thanks!

  • @kennyg7282
    @kennyg7282 Жыл бұрын

    Thank you for this

  • @piercedasian

    @piercedasian

    Жыл бұрын

    you're welcome!

  • @094340
    @0943405 ай бұрын

    Many thanks. In another video, a Honda mechanic also replaced all 4 rubber ignition coil Gaskets (bushings?). Is that absolutely necessary as he indicated it was? It was a silent video but he responded to a poster's question.

  • @italianozuzu1232
    @italianozuzu12328 ай бұрын

    Helps alot. Are Honda Accord 2008 4 cylinders vtek?

  • @marcuslima2535
    @marcuslima25355 ай бұрын

    Thanks for the video man, don’t you torque the bolts or use a gasket sealant?

  • @094340

    @094340

    4 ай бұрын

    He said 6-8 ft. lbs.

  • @richardvedvik979
    @richardvedvik979Ай бұрын

    Great video. Good instructions. A steady camera (mount) makes a huge difference. Some of the kits (Fel Pro) come with new seals around the spark plug holes and new rubber seals/washers for the valve cover mount. Good to mention that if the users sees any oil around the coil pack, those gaskets should be replaced as well.

  • @McDzy
    @McDzy9 ай бұрын

    I accidentally dropped a small rtv inside the engine. Maybe an inch long, but sort of skinny. Would I be okay??

  • @piercedasian

    @piercedasian

    9 ай бұрын

    did it fall in and down through the oil gallery that returns to the oil pan? While my reply is late, you could pour some oil down where the little piece of dried RTV fell down and then open up the oil pan to let it drain out that way. The oil pickups in most motors do have a screen so it likely won't get past that anyways and will eventually just come out on the your next few oil changes.

  • @miguelmarmolejo7740
    @miguelmarmolejo7740 Жыл бұрын

    Can you send a list of bolts that you took off an put on if you have a diagram for where they go

  • @piercedasian

    @piercedasian

    Жыл бұрын

    Hi Miguel, Sorry I don't have the car handy to do this. You'll unfortunately need to watch the video see what I took out (and sadly you might not see every screw I've taken out).

  • @nicholaspetre1
    @nicholaspetre13 ай бұрын

    I am sorry but what about cleaning the valve cover inside and also changing spark plug tube seals!

  • @patrickwallace7455
    @patrickwallace7455 Жыл бұрын

    where did you get your genuine part?

  • @piercedasian

    @piercedasian

    Жыл бұрын

    at my local honda dealership :)