88 MPH DeLorean Kart Build Pt.1 | Vintage Go Kart Chassis
Автокөліктер мен көлік құралдары
Our drag rail is on hold until we get new flywheel magnets, so we're starting a new project! Inspired by the time traveling DeLorean DMC-12 from Back to the Future, we're building an American Express 2.0 chassis with a 20+ horsepower build Predator 212cc engine in hopes of hitting 88 miles an hour.
In this video, we prep and paint our chassis to achieve the stainless steel look of the DeLorean, and assemble the front end of the American Express 2.0 go kart kit.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
Bare frame: goo.gl/7NuZ6Z
Standard kart kit: goo.gl/5TQvzy
Off road kit: goo.gl/GGuZLC
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Пікірлер: 951
Y’all literally inspire me to become a engineer and build my own cars / go karts
@billsfanmc1786
4 жыл бұрын
Same my dude
@BigLui3915
4 жыл бұрын
Hehe
@d4rtzyt858
4 жыл бұрын
Same
@VeteranParanormal1
4 жыл бұрын
They got me to build one too lol 😂
@gowilliesgamingchannel5189
4 жыл бұрын
Facts
Isn’t it sad how a 212cc tiny little motor can go 88mph but a real DeLorean with a v6 can barely even go 88mph
@jedishinobi9399
6 ай бұрын
Not to state the obvious but there is a thing called power to weight ratio, so yeah of course it's faster.
@lolstans285
3 ай бұрын
The reason is because of emission standards at the time, the nation speed limit was 55 mph so there really wasn’t a need to make a car that needed to go any faster
@Rokinbokinstudios
2 ай бұрын
The DMC-12 non federally tuned (European version) could do like 120 mph
@javiermartinez6295
2 ай бұрын
Power weight ratios
found this channel when I was 10. I’m 16 now and building my first go cart
@lometatron357
2 жыл бұрын
Interesting!!! Soon I will do the same😀
@davercabrera7197
2 жыл бұрын
Nice bud
We hit 73 mph on a go kart... why not 88?? Maybe we'll travel through time!
@holmstrom3779
6 жыл бұрын
Nice!
@elcuhhh8611
6 жыл бұрын
CarsandCameras PLEASE DO A REPLICA OF THE CART BLACK JACK USED IN NACHO LIBRE!!!
@destruxandexploze2552
6 жыл бұрын
You'll feel like your doin 200!
@raymondauka5308
6 жыл бұрын
Y'all should supercharge it with a smog pump off a car!
@rattykartracing
6 жыл бұрын
Yesssss
I've been subscribed since the beginning. Yall have managed to not only survive in the KZread world, but thrive!! Keep putting out fire content and yall will go far!! When my son was born, I stayed up many nights watching your videos rocking him. Thanks for the entertainment!! God Bless
@CarsandCameras
6 жыл бұрын
Thanks man! That really means a lot! Seriously!
@bro9654
3 жыл бұрын
@@CarsandCameras 💯
GREAT choice guys. Back to the future is and always will be my favorite movie trilogy of all time.
In 1973 I went 57 MPH on a Bug Cart with a 6ci Tecumseh 4 stroke horizontal shaft. Full disclosure; I worked for a racing engine builder in North Hollywood, CA. A flat head ported and relieved, milled head, modified piston and the oil system modified for dry sump. The crank was drilled so the rod bearing was pressure oiled. Custom intake ported and a diaphragm carb. Direct drive to the axle and yes it needed to be push started. I still have the motor on a display stand. Did I mention 6 cubic inches? Build on my friends. going 60 with your butt 2 inches from the ground is a thrill.
This is an amazing idea I’m a huge back to the future fan so this series will be GREAT!!
If you want to run it alongside a real DeLorean shoot me a message. I'm standing in front of mine in my picture.
@CarsandCameras
6 жыл бұрын
Just emailed you!
@Boemel
6 жыл бұрын
yes :D
@Ratkill9000
6 жыл бұрын
I'm jealous. Wish they were still in mass production.
@Ratkill9000
6 жыл бұрын
Jeffrey Wain more like "new". They are built using left over parts from 1982/83 and sold as new. But they want something like $100,000 now.
@trailerpark187
6 жыл бұрын
If your Delorean is stock the go kart will probably beat you. 2.8 v6 not that great. Luv them anyways.
Y’all make me want to work on more stuff me and my dad work on stuff for around my area and y’all help out some parts I don’t know what it is thank y’all for videos keep it up
Can't wait to see it run.
Looking forward to seeing the 212 build. Morrrre Powerrrr!
you guys inspired me to build my own go kart. You're my favorite channel.
seriously. this channel is freakin awesome, been here since 1k subs, and yall have just got better and better. greetings from Australia!
@isaacitllbefine7231
6 жыл бұрын
SED71 thanks
@carsonfarmer1247
6 жыл бұрын
Isaac it'll be fine what’s up Ike!!
Love the idea! Looking forward to seeing how this turns out.
Can't wait to see this one finished.
The DMC (DeLorean Motor Company) is in Humble, TX. I used to live down the road from there. Y'all should hit them up for some glamor parts potentially. Maybe even some input on what to add to your kart. Cool build can't wait to see what y'all come up with.
Love the Content... You Guys are awesome!!!!!!!!
i'm so stoked to see the end result of this thing!
Hi guys, I would really like to see more videos on you riding your projects around.
super sweet idea!!
I really like that frame. It looks awesome. This build has good potential!
Cool build!!! Can't wait to see what 1955 is like!
Yalls tips and videos help me out alot on my builds big fan of you guys 🤘👍
Man I love these vids these vids get me through a rough school day
Loved The Vid! And Thanks For The Text Back!
So pumped for the build!
i love the movie back to the future, cant wait to see how this project turns out!
Back to the future cart?! That was my fav movie when I was a kid. I want see the cart hit 88 mph that would be great
@ninohdiyafjgjgdihg2666
4 жыл бұрын
عثتفنغنثنقغقا
Y'all make the best go karts, keep it going
You guys are inspiring me to build a budget racing mower!
The idea is soooooo cool. I would have never thought of the idea myself
As a DeLorean owner myself. Very excited for this! I made a full time machine conversion for my car as well!
Bummer about the 420 mounting issues. BUT IT'LL WORK OUT … I think i'd go ahead and fix camber issues now while it's bare,.. Ahh y'all got it down .. this will be interesting to see where it ledes.. Be safe ..
This proyect will be amazing guys !!!!
Looking sweet! Can't wait to see this thing go
CARSANDCAMERAS BABY !!!!
Love watching the new videos!!!! I've finally have a project I'm working on it's a huffy bike with an 80cc 2 stroke kit
@nightmareinaction629
6 жыл бұрын
Sopchoppy boy those aren't really projects I got one and they get boring fast you can barely upgrade them i installed a cdi in mine i changed my timing it went from 34mph to 43mph
@Nissaninthewoods
6 жыл бұрын
nightmare in action. I'm having a blast with mine. And from what I've found on various sites there's quite a few "performance" parts. Not only that in my state I can get it registered as a moped with an inspection. And plus With the way gas prices are going here. $3 dollars a gallon it's getting expensive to keep gassing up my truck every few days. ( 95 chevy 1500 powered by a 350 sbc) Verses filling up once a week with this bike.
@michaelangelod5008
6 жыл бұрын
nightmare in action very true lol my friend has one and his brother rode it for just a day and muffler broke and so did the clutch
@anythingthatmoves9609
6 жыл бұрын
Join the face book group bike berry motorized bike building group
Love it, great theme guys 😁
Love this build!
SMASHED THAT 👍BUTTON!
@chaseware3181
4 жыл бұрын
I LOVE YOUR CHANNEL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Always love your videos guys! #fortestingpurposesonly #itllbefine
Thank you for doing the american express. Cant wait to see the end result!!!!!
Yes!! Need one of those shirts... lol! Can't wait to see this build finished, gonna be sweet! Now to get the flux capacitor a fluxin'
you guys are the best back to the future is the best lol
love ya'll
Good to see someone using a spray paint can correctly ;-) This kart looks great.
Love this channel you guys have the best ideas
you should buy an original american express go kart with the original briggs engine and then compare it too one of the new kits made with completely new parts and do a show down
@savitrrakatamatah7256
5 жыл бұрын
RetroX this go kart is the exact one that you can buy online engine and all. Also I bought an American Express go kart for 25 bucks because the guy said it had a blown engine, turns out it needed fresh gas. It does 32 mph so a little slower than 72.
the kit for this kart is pretty expensive (around $1'500), couldnt you just purchase one of the $400 engines and just building your own kart for alot less?
@ricardosmith6479
4 жыл бұрын
That would take the fun out!
@rogerramsey8307
4 жыл бұрын
@@ricardosmith6479 that would make it more fun
@sleepingturtle32
3 жыл бұрын
Yeah, that’s what I’m gonna do...
I love your videos, i learn so much from them!
Looking forward to the finished kart. Really like the channel.Keep on keeping on.
ive got an outta time licence plate from universal studios, maybe i can send it your way!
Also put some front end brakes if ur going 88mph
Love the show learned a lot from you guys keep it up!!
Cool project!
You should of said "we'll see you in the future" lol
It needs blue LEDs that light up underneath when you hit 88mph
@ColtSSR
6 жыл бұрын
And a small bike size outatime number plate, i think there on ebay, also a mr fusion on the tank.
@ColtSSR
6 жыл бұрын
Mini mr fusion m.ebay.com/itm/Back-to-the-Future-Mr-Fusion-Car-Charger-ThinkGeek/253623025193?epid=16017652302&hash=item3b0d1c3e29:g:guoAAOSwYUBa-eIr
@ColtSSR
6 жыл бұрын
Small Outatime plate m.ebay.com/itm/Back-to-the-Future-Delorean-OUTATIME-LICENSE-PLATE-BICYCLE-SIZED-3-X-6/251806353352?hash=item3aa0d407c8:g:iGgAAOSw8d9Uw-0k
@ColtSSR
6 жыл бұрын
Mini time circuits m.ebay.com/itm/MINI-Time-Circuits-Box-from-Back-To-The-Future-with-backlight/142763455503?hash=item213d5d740f:g:P34AAOSwV6ta2JYR
Dennis is a really great guy. I hoped his idea would have launched better and really wanted one of those frames. The simple karts are the best in my opinion. Currently have a Manco Sidekick in the restore mode.
FINALLY! Something with some decent welds on it!
420 cc engine :D hmmm that means it runs on weed ? :D I know it's bad joke but who cares :D
#itllbefine
Make it interesting Smog pump supercharger!!! I'd love to see a build with one documented well
Hey guys love your videos. I have a mini bike with a 5.5 Honda clone, that I built from scratch in high school. Watching your videos males me wanna dig it out of the garage and put some miles on it.
Buy the flux capacitor usb charger off Amazon
@CarsandCameras
6 жыл бұрын
I bought the one on Etsy... I hope it shows up😬
Yesterday was my birthday I'm now 15
@rcmadness5672
6 жыл бұрын
And I got a 1980 fortrack for my birthday
@CarsandCameras
6 жыл бұрын
Happy birthday!
@rcmadness5672
6 жыл бұрын
Thank you
@OrionMoniz
5 жыл бұрын
Kewl
@dylanbaldwin7934
5 жыл бұрын
Same! Buy todays my bday
Красавчики, жду продолжения!!!
Nice build. really nice, love
When this baby hits 88 miles per hour, you're going to see some serious s***.
Yup this is the one that's gonna put you in the hospital.
I love watching ur guys vidoes keep up the good work hope u can get it to go 88mph and it be cool to go back in time
Arc has been making 212 parts forever
212s are getting boring its always what we see on here
@janeames1513
6 жыл бұрын
the space is limited on the chasis...and 212's can be beefed up to keep up with 4 cylinder cars..
@billypierce4247
6 жыл бұрын
Jane Ames they can stretch the chassis and its that i don't like the 212 I would just rather see a 420
@propaneandpropaneaccessori3446
6 жыл бұрын
Any engine without a manual trans is boring lol
@CarsandCameras
6 жыл бұрын
We do plenty of stuff with other engines! The Lifan 200. 670 V Twin. 900 V Twin. 140 race engine. There are just tons of possibilities with the 212. That's why you see them everywhere.
@dayyou
6 жыл бұрын
Idk man the predator engines have gotten old. Everyone and their mother uses predators. They don't rev very high and make the same amount of power as twostorokes that have half the displacement.
The wider the track, the more leverage bumps have on the steering. The knuckles act like levers, the longer the levers stick out, the more easily the steering can be pushed around by anything bumping the tires.
Great shirts! And darn Nice welds on that chassis!
Stoked this is gonna be a baaaadass gokart. It's funny I was legit looking at all the parts you've used so far yesterday cause I'm making a gokart for my little brothers.
Deloreans were made from lots of differnt types of scrap metal. i live near one of the oringan factorys and have heard alot of storys about them one of my favorte cars. One of the most well known irish cars too.
I had a 1964 bultaco 250 cc fke 3 4 speed , experimental with full body in fiberglass with an interior , it was pure adrenaline
Hank Hill is at it again!
When it comes to thinking about go karts I always watch you guys and you guys have the best content for go karts keep up the good work! And also I like DeLoreans I think they are cool.
This is gunna be wicked as always guys big BTTF fan can't forget the flux capacitor haha and maybe some old school digital guages and or time circuit inspired ignition/kill switch haha but either way it will be awesome
I love that movie!
for the aesthetics it comes the flux capacitor usb charger for 12v, a led adhesive stripe blue for the front bumper and the back of the kart, and don't forget a "mr. fusion" cap for the gas tank, greetings from argentina!
That's one of the nicest looking shirts anyone I watch on YT has done up, genuinely get those on the store.
Hey, John, the DeLorean was only "coated" with stainless streel; its chassis was regular steel, and its body was glassfiber reinforced plastic, coverd by the SS panels. Loved the idea and can't wait to see it finished. Dont't forget the soundrack!
The best bang for your buck on an engine build is to take a predator 212 put a gx140 emulsion tube with stock jet in the carb. remove the muffler and replace with shorty header, no muffler. Unlink the gov. And keep the stock flywheel on. Also cut the yellow donut stopper wire on the back so you can do donuts
It would be nice when you build a stainless steel DeLorean body around the go kart! Great video!
Great Scott!!! ⌚⌚⌚🎬🎬🎬👍👍👍
Awesome , can't wait to see what you guys do to that 212 ! there is definitely guys out racing 85 mph minibikes an racing karts with the 212 but on a old school frame like that !?!? damn its gonna be crazy an i can't wait ..lol
Love the vids! Have you guys ever thought of breaking into the two stroke world? A 3 cylinder two stoke would make that thing fly!
Awesome!!!! Need to do an herbie beetle theme also!
His face when he says, “It’s always a lot bigger than I remember”😆😆
They got insane cams rods stroker cranks forged pistons all the goodies
Great Scot! Please ensure the flux capacitor is in working order
So shiney so chrome
It's allways a lot bigger than I remember 😂, good video, really helped to make a fast go kart, really cool
U guyz are my inspiration
Once again the harbor freight gods have paid off😀
Now your getting close to where Iam at
I like how I just watched back to the future and now I'm watching this 😂