Go Kart to Time Machine Transformation! Delorean Go Kart Build
Автокөліктер мен көлік құралдары
Our vintage go kart with a highly modified Predator 212cc engine did 74MPH on this American Express 2.0 chassis. After much thought, we decided that the 20HP Predator would be better used on a racing kart with better aerodynamics. Today, we're turning our American Express 2.0 go kart into a true Time Machine inspired by the Back to the Future movies.
We install a flux capacitor, custom cut wheel covers that look like Delorean wheels, wiring, and an OUTATIME California license plate. It turned out really well, but we end up trashing the stage 1 Predator 212 engine on it!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----USE CODE "CC10" FOR 10% OFF AT GOPOWERSPORTS.COM----
(Discount applies to mini bike, street kart, and off road kart parts only)
TAV 30 torque converter: goo.gl/u2dtez
Stage 1 performance kit: goo.gl/kiqgPU
Go Power Sports: bit.ly/3QKyODE
Atlantic Design and Mfg. LLC (water jet): / atlantic-design-and-ma...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Пікірлер: 951
Well in the movie when Marty went to 1955 the time machine ran out of plutonium and broke down so it’s fine that it blew up its part of the movie
@Ratkill9000
6 жыл бұрын
But when he went to 1885 without gas, they had to push it with a train to 88mph.
@ImpetuouslyInsane
6 жыл бұрын
Then there's the second movie where the time circuits were malfunctioning. Seriously, the DeLorean had a plethora of mechanical and electronic issues. All you guys did was inherit the DeLorean's curse
@dinosoarskill17
6 жыл бұрын
and it needed new tie rods
@creativecreeper0728
5 жыл бұрын
Theres 88 likes now lol
put the 20 hp back on it thats what you started out to do. and finish it the way you started
@imagineaworld
6 жыл бұрын
glen johnson i thought this was the 212 ????
@imagineaworld
6 жыл бұрын
Jas thought so x)
@harry-kf7kw
6 жыл бұрын
did you not listen at the start, they were using the stage 1 212cc, NOT THE 20bhp 212cc
@MadsWorld34
6 жыл бұрын
they build the 20 hp just for that cart. and they started the video with the 20 hp on it. and they took it off and put a stage one on it . so maybe you should watch the video again.
@MadazMazdas
6 жыл бұрын
a 2 stroke or rotary of that size can easily make 20+ hp
You already went back in time to try and win the lottery but things went wrong and Ike accidentally burnt down your whole garage with the winning ticket inside, You tried to go back in time again but after a second and third attempt things got worse each time, You then decided it would be best to go back and sabotage the engine before you ever went back in time in the first place. This explains why your engine broke, so please don't fix the engine or you will forever be stuck in this time loop!
@CarsandCameras
6 жыл бұрын
Hahaha that’s a good one! Thanks!
@guidoberenstein4775
5 жыл бұрын
😑
@native_built9663
2 жыл бұрын
You basically said the butterfly effect story with a gocart lmao
Running a stock cast aluminum rod at a much higher RPM then stock tends to cause the rod to weld itself to the steel crank. It would be my guess that rod will have pull marks in the journal where the aluminum started to soften up and you'll find corresponding scores marks in the crank pin. The safest way to run at a much higher that stock is to go with a billet aluminum rod with bearing inserts. Love your projects!
I luv that you guys post the stuff that doesn't always work vids it makes it way more interesting
The hub caps really tie it together
@sleepingturtle32
3 жыл бұрын
I agree
My Father made a go-kart for me when I was very young and it was magical! I think he really built it to satisfy the child within himself! My Dad was a speed and racing addict. I really enjoyed watching your videos and really appreciate the fact that if I had a young son or had my Grandkids watching this with me, you guys did not use profanity and were genuine young men and I respect that! You may have lit a fire in me to make my own little racer! Thank you!!
Now you guys just need to tear it down and show us what happened.
@blkicemike4857
6 жыл бұрын
I AGREE,..
@Soupy_loopy
6 жыл бұрын
You're upside down dog! Maybe they need some ape hanger handlebars, LOL
@upsidedowndog1256
6 жыл бұрын
This is not My real Name Funny! Not too tall though I don't have real long legs. The world upside down looks like I am flying even when stuck to the earth.
@pun1sher5150
6 жыл бұрын
Agreed we need to see the tear down and see what failed!
@jafferm1938
6 жыл бұрын
Get the 4 engine gokart and put the stage 4 kit on all 4 engines!!!
I'm looking forward to reading your ideas for a time travel skit!
@Callofdutyday
6 жыл бұрын
CarsandCameras do what we say! Lol
@ProlificInvention
6 жыл бұрын
CarsandCameras I will think of some ideas and be back to this in the comment, in the meantime you guys should look into the CT70 knockoff they just came out with! Icebear makes it and it has a 125cc, semiautomatic shifter, and disc brakes. It looks cool.
@thatmoparguy9837
6 жыл бұрын
CarsandCameras put the big valve 20hp motor back on it!!!!!!
@jacobmansfield7774
6 жыл бұрын
You should add identical front headlights from the delirion and put them on the go kart
@ProlificInvention
6 жыл бұрын
Here is a similar CT70 clone from a couple years ago, but I keep getting an ad for a new one that looks badass on my FB feed. It goes for $1,250 new and looks worth it. kzread.info/dash/bejne/d319x5SgaMTJl9I.html
Plot: go back in time to introduce the cowboys to go carts hopefully inspiring the great great great grandfathers of the current owners of go power sports to create their store by stopping Ike's evil twin brother from the future whos plans are to stop gocarts from ever becoming in favor of bicycles
It definitely needs something on the back that resembles the boosters on the car, also I think that a little grill on the front with lights would make it pop beautifully!
Awesome job editing and making us apart of the builds you do. Definitely enjoy your shenanigans
it Needs to go 88mph . that is the main goal of this cart... after achieving this goal whatever. but until than. keep the biggest motor you can find on hand for this thing.
You go to the future and see an electric go kart!
@milkandcookyz
6 жыл бұрын
an electric go cart that they are also building
@imagineaworld
6 жыл бұрын
And race ;) quarter mile, first one to 88 wins.
@crobles1973
6 жыл бұрын
Electric wins every time. Hands down without a question. Unless it's built improperly.
@robspear03
5 жыл бұрын
...which have WAY more torque.
@nathansellers9841
3 жыл бұрын
@@crobles1973 222
Your talents definately shined on this one guys. Good job, it looks great.
Much respect for not dragging your hand files backwards!
Do a tear down video and it would be cool to see an engine build competition between you and Ike
*CarsandCameras* I also want to see you guys incorporate a Nuvinci transmission into one of your projects badly! Basically future tech, it acts as a clutch and a variable ratio transmission with ridiculous ratio range. Try and pick one up sometime, it would be highly interesting to many I am sure. The motorized bike crowd is starting to use them like crazy.
Such an awesome build. So devastating at the end. Lmao "Wish we could go back in time." Really enjoyed watching this thing start to finish. Rock on.
looks so cool from that down low side shot, love it
Make a skit where you go back to when your dad was a boy and then convince him that when grows up he wants to pave a go cart grand prix track around the perimeter of his property .
It would be cool if you can put some kind of a remake of a miniature body to put on that frame the looks just like the Back to the Future car that would be cool
@JocTTV
6 жыл бұрын
ash c that would be cool to see
@ericross6995
6 жыл бұрын
Would also improve the aero and possibly achieve the 88 mph!
Put the 20hp engine on the drag minibike
@trentschlick3261
5 жыл бұрын
That's a deathwish
@randyconner1663
5 жыл бұрын
A really really fun deathwish lol
Those wheels look awesome, perfect finishing touch!
You should put a 670 to reach 88mph and make time travel possible :p
Knock knock who's there ? Rod Rod who ? Rod knock 😂😂
The wire loom down the sides was an awesome touch!
Those hub caps are great looking imo and definitely need to put on those jet exhaust/old garage heater things.
Go back in time and save that engine lmao
If movies taught me anything, it wouldn't be a time machine if it didn't like to break down at bad times.
Those are some sick hub caps. It rely pulls the Delorean look together.
Obviously ikes classic car collection can play a big part of your skit! Looking forward to it!
I would love to see a tach being put on the go kart that you put the 20hp engine in which you can use to help tune with gear ratio. Just and idea but would be cool to see. You could see about putting in a speedometer that runs a little bit higher than twice as fast as the cart actually goes just for the 88mph in the video
Oh that sucks about the engine, but the kart looks kind of cool. Cheers from Australia.
That Kart looks fast sitting!
The paint job looks perfect from my house. Love watching you guys build stuff.
Look at those fancy wheel, really looks like 60s
@ImpetuouslyInsane
6 жыл бұрын
Ironic you say that considering Ike was wearing a Tie-Dye t-shirt while handling the hubcaps.
You want that cart to go faster? Add some aero to it.. put on a front valance toss on a small wing on the back get you some down force get you some grip and get you some speed. You are fighting a battle with it, on one side you have drag and traction on the other you have speed.
@thegenerousdegenerate9395
6 жыл бұрын
Benjamin Hale traction isnt really an issue but aero would help immensely.
@bdhale34
6 жыл бұрын
I think at the speeds they are trying for in something as light as they are using wheels not staying planted on the ground is a fairly big issue.
The wheels killed it!!!so good,you guys sure do have some very cool ideas, she looks mighty fine!!!😉😎
Maybe a skit on you guys going back in time to tell your past selfs to remember to check the oil. Lol 😂
Why did you EVER swap engines
I wish you went back in time and uploaded it 2 weeks ago but I guess you guys had troubld getting up to 88 mph.
do you guys set crankshaft end play when you're messing with flywheels & clutches....?
Those covers are on point 👍👍
Im here and ready for the video. Cannot wait to see it
The kart looks great and I'm glad you decided to take the high hp engine off and use it for something that deserves it. Sucks it kinda blew up at the end but it's a predator and cheap. Looking forward to the next video so keep em coming
Wheel covers rock ! Maybe some ledstrips on the bottom for twilight shows
Cool little cart boys!
I feel like the hemi variant tends to break more often than the normal one.
go back in time to one of your first builds and give yourselves a few tips on how to make the build go smooth. re enact the build then go back and add an alternate ending to the actual build vid
I think some Emery cloth would be good for sanding down and fixing your welds on tubular stuff like that you got to check it out it works pretty good
Those wheels look great!
Ayeeeeeee
You guys go back in time, and we find out how you and Ike got into go karts, then we go forward in time to when you guys were building some of your earlier karts. Then we go into the future of the cars and cameras channel and try to guess what you guys we’ll be making next
Cool channel guys. Im putting mine together now. Ill be doing a broader range of stuff but plan on doing a special cart build soon.
Make a dual exhaust in the back and make the muffler look like the big rectangles. That’d look so cool! I love the build and can’t wait to see where it goes!
You did pretty much nail it with this cart, except for that pesky 88mph thing... Was hoping to see 88
might I make a small sugestion please ? how bout ....now stay with me its a lil bit out there lol take the engine off the dragster toss it on the time machine and get a Bussa engine for the dragster lol if nothin else at least get a Bussa engine in sumthin thanks from Athens Vermont
@rangerst_870
6 жыл бұрын
Because that’s not what they want to do. Had 400000000000 people say that shit when they started the build. They DONT WANT TO DO IT!!
@thegenerousdegenerate9395
6 жыл бұрын
SEAN BENWARE now THATS a good plan!!!
@greenmountainsuriving
6 жыл бұрын
Dude you ever heard of Lightin up its called have some fun i allways say something because every coment helps there bottom line so ED H Chill the FuK OUT
@greenmountainsuriving
6 жыл бұрын
dude the drag cart would scoot
@imagineaworld
6 жыл бұрын
SEAN BENWARE yeah but he does have a point. The entire point of the build was a miniature vintage rail frame with the biggest harbor freight motor publicly available, decked out all pretty. Bright loud and supprisingly fast. They havent gotten reliability down on the predators. Ike uses alot of techs that were good for old bulletproof honda and briggs engines. The predators are made to perform to its structural integrity, not for performans or even reliability. Cheap mats, dial it back. Simple. The upgrades required to get the result they want would require them doing math, measurments, and thought. A dremmel and bolt on go fast parts are NOT going to be reliable or efficient for the money and work youre willing to risk. @carsandcameras i hope you read this. You guys need to get that v twin upside down and empty, and i want to see math, i want to see drawings, i want you guys to recognize volumetric efficiency, harmonics and what youre trying to acheive as well as how to get there. The smartest thing you can do is buy a white board and a loooot of magnets and paper. You have to see your goal to know how it gets accomplished. Until then youre going to chase your tail longer than itd take to cast an entire new v twim from scratch. Im only bustin your balls but i mean every word of it. Happy gooning!!!
Always something cool from you two, our Dynamic time traveling duo!
So should I be ok removing the governor with a stage one and tourqe converter on my 212
Isaac need to say “I sell propane and propane accessories”,he sounds like Hank Hill it’s great
I have an engine off of zero turn lawn mower 25 horse V-Twin and you guys inspired me I'm going to build me a go-kart around that engine but I think I'm going to make it front-engine rear-wheel-drive it'll be cool I'll let you guys know what happens
@thegenerousdegenerate9395
6 жыл бұрын
Shawn Jerome film it man. That would be a cool build to watch. You dont have to talk, just slide show or time lapse.
@izzyplusplusplus1004
6 жыл бұрын
Do it! And film it. Then link it on a comment here at Cars and Cameras. 🎥
@BuzzLOLOL
6 жыл бұрын
Poor traction with engine weight in front... these guys did a similar build with Red Wagon cart... I'd suggest twin LawnBoy 6 1/2 HP 2 cycle engines... they're very light...
Don't forget a big wing and a flame paint job. Lean forward and squint your eyes while in motion. All this advice is free. Priceless. It'll make you go faster.
This is the nicest looking go cart you guys have done.
Now you'll have to build a VW Camper kart for the terrorist scene 😄
You go to 2379 then you see yourself walking on the street you wonder how you lived so long. Then you see a kid fall off his bike but he doesent bleed you just see wires. Soon you go to yourself and start asking questions on why eveywone is a robot. After that you go to the stor because you are hungry but you dont have an identification code. So the robocops start coming after you so you get on your go kart and go back in time but you where doing is so quick that you messed up and instead of going to 2018 you go to 1983. Then you have to try to get to 2018 but you need a gigawatt. And there is noplace to get that other than lightning. And also you would have to try to get the lightning without altering the future.
@thegenerousdegenerate9395
6 жыл бұрын
Moneymaker1939 that was a bomb ass movie... Its called back to the future. He gets the lightning from a strike hitting a clock and the news writting about it so he knows when.
I want this kart. Like this exact setup. It just looks so clean, I'm trying to emulate it with my Manco 1 seater. Keep it up guys!
Absolutely cool the rims !
I like that sexy Delorean it revs my engine
If you guys want I could build a simple version of the time circuits for on the go kart
The hubcaps are kick ass looking.
That is really a good looking cart. Wheel covers are awesome.
2:16 & 6:41 - that's what she said! 🤣
I think y’all tightened the torque converter pulley too much which caused it hard to pull start. Keep up the great work👍
@curvearounddog3377
6 жыл бұрын
SHADOUGH WALK3R I think that too.
@13coyote13
6 жыл бұрын
Not even related, tightening the clutch bolt only helps keep the clutch on the crankshaft it doesn't do anything to change the dynamics of the pull starter or the ability for the crank to turn.
I like it , it looks cool and the wheel plates were a good idea ,
Looks good guys! Work on that seat a little more. A few ideas for y'all would be louvers maybe in the side seat bars? Also what about a whip antenna for when the lightining struck the clock tower and they fed the car off that? Also adding four small lights would top off the front. Give it that delorean look
2
@justinangelo3434
6 жыл бұрын
3 4 5 6 7
@justinangelo3434
6 жыл бұрын
Ass
@DougL12
6 жыл бұрын
8 9 10 11
@justinangelo3434
6 жыл бұрын
12 13 14 15
@justinangelo3434
6 жыл бұрын
He
First comment
Well it looks good and seems faster than expected
You guys have a lot of nice creative ideas, I love it!!! awesome!!!
If you could do some sort of plot like the Overdrift video on youtube that would be awesome. Maybe a different story set in the same world or something. Anything related to that would be great.
Looks awesome!
You guys have some older cars that you could use in the Back to the Future skit. You could start with the newer cars parked in the driveway, then go "back in time," and have the older cars parked there. It's nothing major for a skit, but it's a start I guess.
Should come up with a way to lay down fire tracks behind the tires. Should be a semi easy cool affect.
AWESOME EDITING!!!!
I love watching all you gocart videos.your the best channel for all things gocart ..
Holy, a cart with dish custom wheels, I believe that’s the first time I’ve ever seen that, that’s a cool look!
@isaacitllbefine7231
6 жыл бұрын
Zmairo thanks
I stayed up all night waiting for an upload
All time favorite movies. Good job guys👍
Do some back to the future skits, Isaac as doc, John as Marty. Use the rooster as Einstein
Just a tip, try to get a sanding disk for grinding down welds, they cut through metal so fast and they leave a much nicer finish. I use them to grind welds off when I can.
You could build a fibre glass body shaped as a delorian that would be good :)
@andrewcollura4099
6 жыл бұрын
Ben Williams that would be smart
You should use ike's brother in your skit so it appears ike meets himself through time travel.
Do you ever post or link to gokart frame plans with measurements? I've seen a few of your vids (all great) but I didnt see any wheryou build the frame, so far it's been restoring existing go karts.
at least your wrinkles were even all the way around lol. very cool build guys
ike......always rockin the tie dye t-shirts!!! they match the wheel covers to the t!
Awesome content!
travel skit : You go back in time to visit young selfs and warned about using the impact tool on the delorean built
I had the same thing with my predator 212 on my Mini Bike. I remove the governor, thought I heard a rod knock after that but it turns out that I had valve float. since then I have put new valves in it and added 18 pound valve springs. haven’t heard it since and I have had no problems with that either. All thanks to go Powersports.
The kart is looking great you two! Only touch I think it's missing is the DMC grill on the front. Maybe your water jet friend could hook you up again?