870HP Stroker 4G63 EVO 8 | KNG4G Drag Car [TECH TALK]
Автокөліктер мен көлік құралдары
4WD applications give traction advantages in most motorsports however in the world of drag racing it can sometimes be hard to dial in to ensure that you don’t end up with too much.
Running a FuelTech FT600 ECU and a 2.2L stroker 4G63, this Mitsubishi EVO 8 aka KNG 4G has already run a 10.50 at 150mph on a more basic setup and with a solid 650kw (870hp) at the moment there is plenty of room to turn the wick up as the driver's experience and the build progress.
Joe Karam of Team Karam Racing runs us through some of the advantages of the FT600 which is both an ECU and dash display in one unit, how the Magnus Motorsport slipper valve helps get the power to the ground through the 5 speed Samsonas sequential and R32 rear diff.
Want to learn how to tune EFI? Start here instantly, and for free: bit.ly/EngineTuningFree
Website: www.hpacademy.com
Contact: support@hpacademy.com
Merch shop: bit.ly/MerchHPA
#highperformanceacademy #teamkaramracing #kng4g #learntotune #evo8 #dragracing #jamboree
Пікірлер: 66
Interviewer has so much knowledge. I wish I could have it all.
@roskataqv
4 жыл бұрын
I LOVE how some of the guys try to hide their technique but he knows perfectly well an calls them out directly on the mic to spit it.
Nice feature guys I like to see the non rwd stuff to see how people get around it's challenges
All round top bloke. Great interview, could of listened to you guys for ages 👌🇬🇧
Man, I just love Andre interviewing people, he's so smooth on point with his questions and comments🙏🙏🙏
Love EVO's, Great evo from Team Karam!, has all the technology, bells and whistles!
Andre everytime i see you in an interview your knowledge seems close to endless. You can feel that you really live that stuff. Greetings from Germany.
Thanks for the drag break down there with the 60ft and how that extrapolates out to the end run. I've watched plenty of stuff, but never dived into the timing side of drag more the tech. So this was a nice little piece to add in. Thanks again!
Super clean build, fab looks awesome.
Per usual I feel so much more informed at watching his videos.🙌🙌
I like the indept of this. Definitely starts making me think a about this in other forms of racing
Another great interview 👍🏻
Good info 😎 thanks for the coverage
@hpa101
4 жыл бұрын
Glad you enjoyed it mate - Taz.
That car could almost convert me from Subaru. Insane build, great content
Andre you should do a run down on ur 1st setup on docile bak in the days or just do a rundown of a basic setup an Evo would run back in the days like a throwback episode or even do a run down on docile from start to finish I rekon that would be cool
Thought that would be into the 9’s for sure
@hpa101
4 жыл бұрын
The driver is just cutting his teeth, as well as the car needed a cage and shoot added I believe to continue to race on the strip. More to come I'm sure as both driver and car grow =D - Taz.
@sheriffbang8039
4 жыл бұрын
What did it run on the 60 and trap times? Mph etc
Where can we find more info on this car and the team involved?
@hpa101
4 жыл бұрын
I think this is probably the best place: facebook.com/Karamracing.com.au/ - Taz.
Beautiful setup... I'll trade you 😂
This guy seemed pissed off with the questions 😅
Why the engine position looks like fwd ?
Fully sick hectic spec Evo uleh
That's a clean as fuck car, nice video
U know when this all has got crazy when a 1000hp 35/84 on a 4 cylinder is considered small !
Do you have or can you do a video on that standalone ecu dash setup?
@hpa101
Жыл бұрын
Like this one? - www.hpacademy.com/previous-webinars/265-configuring-can-communications-dash-to-ecu/ - Taz.
@hpa101
Жыл бұрын
Ahh you mean one for a FuelTech? Not yet, I would say later this year but most likely next year now we should be diving into that platform. Note a lot of these things still work in the same way, just with different software, so I wouldn't necessarily hold out for anything but rather use everything you can get your hands on now to learn 🤘 - Taz.
👌 4wd 4bangers👌
This principal looks alot like the CDV which BMW uses in there manuals
Fuckin gorgeous build also.
Drag racing Evo with a wing is rare.
Umm is that a record for a stock block evo, and even stock block 4g63
@hpa101
4 жыл бұрын
I don't believe so, but still impressive 😎 - Taz.
@MyLonewolf25
4 жыл бұрын
Not enough close but definitely impressive
@Kenuwine24
4 жыл бұрын
I'm including stock rod and pistons not bare block
@Realtime1501
4 жыл бұрын
@@Kenuwine24 this a 2.2L so I'm going to guess it's not stock rods and pistons
With a brain like Andre, I wonder if guys see him coming and prep for an interview just in case. So they aren't caught slipping.
I clicked thinking stock Evo block lol got rapped
@bigbothoee8617
4 жыл бұрын
As in stock internals
Only 10.50?
@hpa101
2 жыл бұрын
Yep! Driver and car both have more experience and are in the 8's now I believe - Taz.
10.50 ? Is that right ? At 850hp
@JoeeyyyBro
4 жыл бұрын
that was with a 2.0 60ft, if you check out team karam racing on facebook the time slip for that pass is posted, i don’t think the car has run a new time since due to being kicked out for the mph and no cage at the time
@hpa101
4 жыл бұрын
@JoeeyyBro Looks like they were getting the cage and parachute sorted just before old mate Pandemic, so I'm sure we'll see it on the track again once things settle down 😎 Woo! - Taz.
I did enjoy this video, so I liked it. But I was already subscribed so I couldn’t subscribe again
@hpa101
4 жыл бұрын
We'll let you away with it this time 😂Cheers for the support mate! We also have a 24/7 stream now too: bit.ly/247SUB - Taz.
Are u guys hiring a water boy? Ill work for free just take me everywhere you go i love this scientific shit
A 6G will help you slip the tires a little vs a 4G
5:09 "we've pushed others in the future you know well over 1000hp"..... so it hasn't happened yet???
@hpa101
4 жыл бұрын
Just a slip of the tongue. I'm guessing he means they have done the same with other 4G63 builds where they ramp things up with time rather than being a time traveller 😎 You can check out some other builds and tuning work they have been involved with here: facebook.com/Karamracing.com.au/ - Taz.
10.5 is slow for 150mph. He should be in the 9s
No jdm bumper? Wack
That should be running low 9's. That clutch slip is slowing you down IMO
@Jolinator
4 жыл бұрын
We got a Sherlock Holmes over here. I'm sure you know more than the guys who built it but if you listened It was mentioned multiple times the driver is still getting use to the car.
@tylerjdubbs3141
4 жыл бұрын
The clutch only launches, sequential takes the rest, still think its slowing them down?
First?
Man up and manually slip the damn clutch!
@hpa101
4 жыл бұрын
The goal is to go as fast as possible. If you wish to not use a slipper clutch in your own setup though that is fine, no one will judge you for it =) - Taz.
@AWD_T
4 жыл бұрын
High Performance Academy I was just being a wise ass 😜. I’m sure it’s way harder to have a consistent 60’ at those power levels
Drag racing an Evo is a complete waste of a great car.
@hpa101
4 жыл бұрын
I'm afraid you aren't going to convince us of that ;) We love drag race EVOs. Just remember how you enjoy cars and how other people enjoy cars is likely to be different. And that is ok.
@gordowg1wg145
4 жыл бұрын
@@hpa101 Yup, different strokes for different blokes. Not my thing, either, but the engineering behind builds like this is cool, and can often be adapted for other motorsports. For example, transmissions that can take the abuse of clutch drops on high grip drag strips will almost certainly stand up to anything a circuit car can hand out! Head sealing methods that can hold 80PSI of boost will be almost bullet proof with a 'mere' 50! Connecting rods and pistons that live at 12k rpm will have a 20% safety factor at a 'mere' 10k. There is an old expression "racing improves the breed".
@blankblank3397
4 жыл бұрын
You wouldn't have good entertainment or know the car/product limitations if it weren't for the guys that drag them