Thanks for sharing. Watching other transmission videos they show tearing one down but they rarely show the actual testing. Thanks for sharing your info and knowledge Artie 👍

What a great video demonstrating before and after values

Thank you for sharing this great Diy video !! I needed to acquire an Affordable calibrated vacuum test meter & your video helped tremendously !! Great channel content...Thx,....tom.

A pencil eraser works perfectly to plug orifices on the valves 😊

Nice video bro

Nice video

I would like to know where u are located I have a 2014 silverado that is starting to have transmission problems

Thanks for the demo. I guess there's no way to ream the bore and use an oversize valve.

@AutomaticTransmission

2 жыл бұрын

Go to sonnax website, for every valve that they sell there's a minimum vacuum standard reading. If it's within specifications you'll put a drop in valve. If it's below you ream.

What are the symptoms of a failing pressure regulator valve?

Hiram: do you know of anyone that has an oversized valve and bore reamer for the 80?

💯💯💯👍🏽

Would readings be different if hot transmission thanks 👍

@AutomaticTransmission

2 жыл бұрын

Yes since the fluid gets thinner and metals expand with heat. If you notice I have the valve clean and dry, fluid would give me a better reading since it covers the wear somewhat.

I've got a question for you

Where are u located

By any chance what’s the name of your shop or email I can reach you at?

How to determine the bore is worn too much

@AutomaticTransmission

2 жыл бұрын

Go to sonnax website, on every valve they sell there's a minimum vacuum standard. If it's close to it or slightly below you can install a drop in valve. If it's way too low then you need to ream it and install an oversized valve.

@vs68s39

2 жыл бұрын

@@AutomaticTransmission Thank you.

Where are you located?

@AutomaticTransmission

2 жыл бұрын

Send me an email