Thanks for the video, Roger! Just so others are aware, their faucet (like mine) may be different. I was prepared to replace the spring and washer, but turns out my 2-handle faucet was different. It deployed screw-on brass valve stems that had a size 0 rubber washer that was held on at the bottom with a Phillips screw. Also an easy repair, but just a different configuration.

@RogerWakefield

8 ай бұрын

Thanks for sharing that tip!

Again, your video made quick work of my leaking faucet. Thanks so much for your videos!

Roger, your videos are always helpful and I’m thankful that I subscribed to your channel because if I ever have a plumbing problem or emergency I will use your videos to help me.

@RogerWakefield

Жыл бұрын

That’s the reason of me making videos, glad to know they serve a purpose! Thanks

I've been following your videos for a while now, and you are always informative and on point with your content. I admire you and would love to collaborate if you want a guest on your channel. Keep up the great work!

From Roger to Roger, thank you Roger. Love the work Roger, keep up the good work Roger !

@RogerWakefield

7 ай бұрын

To you Roger, from Roger...Thank you Roger for the kind words...

I was distracted by the $1,000 worth of packout boxes in the background. 😂

@RogerWakefield

Жыл бұрын

👀 they do look nice don’t they

Thanks,I did

Thanks for the help. I'm going to give it a shot. 🎉

This helped a lot Thank you

@RogerWakefield

Жыл бұрын

Glad to hear!

Wow, this was a lifesaver for me. Lots of company tomorrow. My faucets are not leaking anymore.!

@RogerWakefield

5 ай бұрын

Great to hear!

Thanks mine is fixed!!!

Speaking from my VERY limited experience, it is a good idea to know where the main water shut off is in your house as well. Thank you for the vid!

@RogerWakefield

7 ай бұрын

its ALWAYS important to know where your water and gas shut off valves are to your house...this is information everyone living in the home NEEDS to know

Thanks Roger

@RogerWakefield

11 ай бұрын

No problem! Glad I could help you out

Well THAT sure worked out perfectly! Lol! Were they ALL this simple & accessible! Lol I think you missed one of the most important steps: Step 0: COVER/PLUG the DRAIN(S) in case you drop a screw/washer/spring etc. into the sink and it rolls down the drain (as you curse in slow-motion!)

Hey Roger, With so many differant types/brands of faucet, do you have to take the cartridge out to referance what to go buy? Or are they basic and easy enough to find whereas a guy could not have to make 2 trips and have the homeowner be without water How about making sure your basket strainers are in? Removing the airiater also not a bad idea and being prepared to replace bad shut-off valves. In advance.

How do I tell what parts need to be replaced? Cartridges can be spendy

@RogerWakefield

7 ай бұрын

are there any parts that look damaged? You may not have to replace anything, just take it apart,clean it and put it back together

I'm still struggling with a kitchen and lavatory slow leak on faucets. I've taken them apart and replaced the spring/rubber. Sounds like I'll have to replace the cartridge next to fix it.

@RogerWakefield

Жыл бұрын

It’s worth a shot…hope that fixes the problem!

Now do a univalve facet, please!

"Dirty Hoe Garden Supply" made me and my girlfriend crack up XD Thanks for the helpful vid. Commenting and liking for "engagement points" and subscribing.

I just tell the customer to buy a new faucet lol

What no handle puller?

Hello Roger. I was not able to find an email address or a way to contact you other than left a KZread comment. Regardless I was wondering if you could help me prepare for an interview I have coming up with my local plumbers and pipefitters union. I love your videos so much it has inspired me to pursue a career in plumbing and hopefully one day become a master plumber and be able to teach younger generations.

@RogerWakefield

Жыл бұрын

Hey Trevor…I have a link in my description on how to get in contact with me. I have multiple videos on preparing for a job interview on what questions to ask and how to answer questions. Hopefully those help you out…good luck on your journey !

im flabbergasted at those SharkBite angle stops

@RogerWakefield

Жыл бұрын

It’s a QuickFitting same type of fitting…different brand..way better

Mine didn't have a spring or rubber washer under the cartridge. Spent the last 30 min trying to find it till I realized it wasn't there. Turns out they don't all have one. Would have been nice to know for anyone with similar issue 👍🏻

@sage0925

7 ай бұрын

Yep. Mine was just a cartridge. However, the majority of the video I found helpful.

My faucet has no screws , or anything to take off. What do you do?

Roger bro. Plz tell me. What is the requirements for getting the plumbing job. In USA. From Pakistan

@RogerWakefield

Жыл бұрын

You need to have a license to do plumbing. Look up in your area what is required to be a plumber. Most likely you will need to do at least 4 years of apprentice work...Hope this helps

@amirpandayt8786

Жыл бұрын

@@RogerWakefield can we get a job in USA. As a plumbing. When have experience and license?

Roger I hired a plumber who uses shark bites because he said he didn't want to start a fire in the wall, but he turned out to be the WORST plumber in the country. He flooded my basement, ruined my shower plumbing, horrible finish work. Nightmare experience.

@RogerWakefield

Жыл бұрын

Sooo sorry to hear about this, sharkbites are a 🚩

@chris76-01

Жыл бұрын

He could have used a brass compression fitting.

@SadUncleTed

Жыл бұрын

​@@chris76-01 could have used pro-press.

@unclej7621

Жыл бұрын

Maybe get someone with a license next time instead of the guy in front of Home Depot ma’am

@speakfreely.1776

Жыл бұрын

@@unclej7621 maybe shove a stick up where the sun don't shine, buddy.

I took off my handle and removed the stem gasket and spring and it is still leaking from my hot water valve. What else could it be?

"if it's broke, don't fix it." - Roger Wakefield

I just change out the whole fixture, and fuggeddiboutit

Ifi screw up wouldn't I ĵst go under sink and turn it off there and not and the main?

On my cold water side water is dripping under the sink when the handle is turned on. It drips directly from under the mounting nut. Any idea why?

@RogerWakefield

10 ай бұрын

May need to replace the faucet. You need to find out where the water is coming out of the faucet at…

Add a comment...

@aaronjoseph1777

Жыл бұрын

Sure thing...

@RogerWakefield

Жыл бұрын

Yessir

@chris76-01

Жыл бұрын

A comment 😁

This is way too much for me..I think I'll just call a plumber!

Change the angle stops and supply hoses too for some extra $ lol