Пікірлер

• 
  @Raymail-tj4cf23 сағат бұрын

  I am surprised you didn’t use old school lye.

• 
  @isaiah247823 сағат бұрын

  Great and amazing video yet again! I do want to say that you did not mention running an exhaust/intake for the tankless water heat.

• 
  @cesarcastillo7986Күн бұрын

  I’ll be there!

• 
  @Jake-uc8mbКүн бұрын

  My boss is my mentor. He does all 10... not only am i not wasting my money i am getting paid for it... over 1 million unfilled trade jobs, if they wont teach you, invest in you, help you, you either need to find someone else who will or check your own attitude commitment work ethic etc.

• 
  @grow-with-a-growl-farmКүн бұрын

  would i find one on a 1950 home?

• 
  @smallztipsandtricks7646Күн бұрын

  I been wanting one of those leak tools ima do my best to catch it

• 
  @krisomarcrispin1035Күн бұрын

  What if diafram not coming off? Does not twist to remove

• 
  @adanmendoza5895Күн бұрын

  Yes!

• 
  @nobrakebrettКүн бұрын

  I will be there!

• 
  @jorgethekoala9682Күн бұрын

  C. J. Graham will be there

• 
  @jorgethekoala9682Күн бұрын

  Srr can't I work tm for a comicon

• 
  @dbrown2746ableКүн бұрын

  Does this work on pex?

• 
  @dominicchiottiКүн бұрын

  Just got off work and downloaded the app off the link from my email!

• 
  @amyl2938Күн бұрын

  This isnt because of your own pipes people…

• 
  @garbo8962Күн бұрын

  Best job ever is an electrician and not a turd tossing plumber. Sorry. Both probably the best trades for moonlighting.

• 
  @syreplays5079Күн бұрын

  My only real issue with the acrylic is the lack of a horn to help the wax keep shape.

• 
  @WideHarryCockКүн бұрын

  Should I join the union with 0 experience? I’m getting an email from the location down the road from me…just don’t wanna walk in at level 1 and be made fun of lol

• 
  @5starlifestyle555Күн бұрын

  Is this course still available?

• 
  @RogerWakefieldКүн бұрын

  Yes it is still available visit this link bit.ly/rogersfreeminicourse

• 
  @trentsolomon4524Күн бұрын

  I find a double accordion toilet plastic plunger is the best option

• 
  @clintnygren9427Күн бұрын

  Can it be electric instead of gas?

• 
  @RogerWakefieldКүн бұрын

  I'm not sure if Rinnai makes an electric combi boiler, that is something you may have to do research on.

• 
  @joer7327Күн бұрын

  Don't flush wipes. None of them break down. If they did, they'd break down in their own packaging.

• 
  @RogerWakefieldКүн бұрын

  If you soak an entire roll of toilet paper in it's packaging it's not doing to break down.....but I see your point.

• 
  @pj61114Күн бұрын

  Great job! Thank you.

• 
  @RogerWakefieldКүн бұрын

  My pleasure!

• 
  @pybarra2Күн бұрын

  I have a home (2 years old) that already has 2 traditional gas water heaters. I am looking to replace them with tankless water heaters. What is your recommendations and they are far apart.

• 
  @RogerWakefieldКүн бұрын

  Are they not producing enough hot water for you?

• 
  @pybarra2Күн бұрын

  @@RogerWakefield They work fine, my wife and i will be retiring in about a year and a half and dont want to worry about water problems if that ever happened while we are gone. We plan at times to be out for a 3 month period or so. Why pay to heat up water if we dont need to.

• 
  @pybarra2Күн бұрын

  Both are 40 Gal Tanks on each side of the house.

• 
  @RogerWakefieldКүн бұрын

  If you set your gas pilot to 'vacation' or similar setting that should work for you. However, if you're still wanting to change systems entirely tankless could be an option...check first with a plumber to see if you need to upsize your gas line before doing so.

• 
  @boscobaracus1823Күн бұрын

  I trust solder more than anything else. That being said, I tend to propress in areas that will remain accessible (ie water heater hookups) and solder in tight spots or areas that will not be accessible later.

• 
  @RogerWakefieldКүн бұрын

  That's a great way to do it...

• 
  @jaypeerobot3745Күн бұрын

  I used A2 + B2= C2 and got 16.97".

• 
  @tylerstafinski6013Күн бұрын

  Morning Rodger, I wanted to ask a question about joining the union. I am 30years old and looking to make a career change. I have multiple trades experience; Plumbing, Electrical, Carpentry etc. my wife and I are a little worried about the wage difference starting in the union at 15 an hour and the incremental increase each year. I’m in Cleveland Ohio and have yet to reach out the local union hall. Any advice?

• 
  @libsrmarxistКүн бұрын

  I installed a backflo preventor in a Lowe's and it started spitting out water from the vent just minutes after I turned the water back on. It's on a 3/4" line that feeds the misting system in the outdoor garden. Would hammering from the use of let's say the toilets and urinals cause this? If I installed a spring loaded check valve in front of the preventor would that eliminate the spitting?

• 
  @ItsOurLandКүн бұрын

  I just moved to a new house, i tried to shut it of but it won’t budge, i put all of my power to it but it won’t turn at all, what should i do?

• 
  @TheBillMurrrayКүн бұрын

  Dispose ALL

• 
  @jerryslover2 күн бұрын

  I can't stand people who think they are owed a job just because they have a degree.

• 
  @jamesyarbrough47772 күн бұрын

  hell ya brother! spread the word

• 
  @jamesyarbrough47772 күн бұрын

  tx journeyman. max wax all day, everyday

• 
  @internalharm2 күн бұрын

  I use cottenelle and never had issue. My house is 14 year old. I guess it depends on the age of the house and me. 😂

• 
  @bolagod28552 күн бұрын

  I'm 18 and I've been looking to get into plumbing but I know nothing about it and I'm just wondering do I need to know a lot about it before i get into it

• 
  @RogerWakefieldКүн бұрын

  You don't need to know anything...I got into plumbing knowing nothing about it. Just look for companies that are looking to hire with no experience.

• 
  @jamescarter63182 күн бұрын

  Roger I've never seen this repair device until today. Looks pretty good for a homeowner to get by until he can get someone to solder a repair coupling on. Side note. You really shot a mouse with a 50 cal using that impact wrench. That things gotta have 500+ ft pounds of torque.

• 
  @RogerWakefieldКүн бұрын

  Yeah lol wanted to make sure it was on good 😅😂

• 
  @davidstepeck26442 күн бұрын

  I have the best cleaner known to man…it’s called removing the trap and cleaning it out. Bath tub and showers drains are bore difficult to remove the trap, so I use a snake.

• 
  @robertluich56562 күн бұрын

  I'm not a fan of pex pipes. They don't work good for winner where I'm from. I like copper Soderen R brazen. I don't like sharp bites. I don't like pressed. There's nothing wrong with the old school way. Cause it works fine. The new stuff don't work with that great. Anything new these days? They engineer, even on vehicles. It's just garbage

• 
  @robertluich56562 күн бұрын

  I don't like pressed are shark bites. Arpex pipes, I like good old-fashioned, sovereign or brazen. And use them copper pipes