In todays video we install a rough country lift on our 1996 GMC Yukon one month project truck!!!
Жүктеу.....
Пікірлер: 170
@gregg.68536 ай бұрын
Put some 37/14.50/16 and some boggers on that thing
@homeofinventions
6 ай бұрын
BR-549
@matthewtittle9672
6 ай бұрын
Facts some saw blades and 37in boggers would go hard
@gregg.6853
6 ай бұрын
I was kinda thinking more of OG Larry set up with the polished aluminum bullet hole rims
@LS-lover02
6 ай бұрын
R16 is too small for 37s in my opinion.. 22s would be niceee
@cooperbryant785
5 ай бұрын
The tires he has on right now look damn near perfect already to me personally.
@jeromeburrasca67106 ай бұрын
Good job! Lifted Suburban’s and Tahoe’s are definitely the do it all trucks to keep in the family forever. ❤
@some1udontknow96811 күн бұрын
Thank you for the editing skill I hate fast forwarding since I pay for premium KZread and only watch content that is relevant Again thank you for the video
@augiequintero41474 ай бұрын
Great video, good job on video and work. I have 98 suburban , blue like yours . Unfortunately I payed someone to install my lift they did a horrible job on it, Now that I see your lift you working on your truck , I think I should have done it myself. By the way for those of you that live in Cali, sylmar area shops name is Omar’s tire!! Took for ever and horrible job!
@gavenvaughn33545 ай бұрын
Looks great, I love the quality of your videos, definitely one of the best guides out there!
@williamclark67046 ай бұрын
Looks good those electric folding steps would be sick aswell!!!
@glenntumbleston87356 ай бұрын
Keep the valance. It gives it that clean “factory lifted “ look especially with the reps on it
@KgTV336 ай бұрын
Looks perfect👌 keep the valance. Now that's what a truck is supposed to look like💪
@jmyrick24395 ай бұрын
I've been thinking on lifting my 98 GMC k2500 for a while now but there isn't hardly any videos for me to know exactly what I'm doing. This video helped a ton love the truck. Great video. Well worth watching.
@codylewis85936 ай бұрын
I have the same lift on my 97 suburban with l45 motor swap, multiport injection upgrade, monster custom built transmission, black bear computer, heavy half rear-end swap, and tons more... runs great... love this build for sure..
@3CsRanch6 ай бұрын
Great video and perfect amount of detail! Definitely leave the valence on and keep it just how you have it otherwise! Fantastic looking OBS Yukon!
@DaleGribbleofArlen6 ай бұрын
Bro your channel is growing so much I remember first watching you because I have the same truck and now you’re getting hundred of thousands of views constantly!!! Bro KEEP UP THE GRIND AND KEEP THE COMMON MAN CONTENT COMING
@SamuelBerryhill6 ай бұрын
Thanks for video man it looks good. Makes me want to lift my 94 suburban now lol. Keep up the good work God bless
@valleymade95636 ай бұрын
Love the content man been watching you’re videos for about 3 years now
@davedonlick21466 ай бұрын
LOOKS AWESOME and GREAT music!
@lorimarkie1836 ай бұрын
Love everything you do on the vehicle’s, great job!
@dillonmcgovern96226 ай бұрын
Love the longer videos man! Keep up the good work
@rjordansr655 ай бұрын
Man I like the way you work!! Old Marine.
@Adjust-Fire-jy3dy6 ай бұрын
That's a lot of work to do by yourself. Looks great!
@KameronKinser3 ай бұрын
Nice Truck and great video. Very good job explaining everything.
@TahoeTyler046 ай бұрын
Looks good. Now all that's lacking are some welds, an aggressive mt, and some clear side markers👍
@lindahendrix546 ай бұрын
keep up the awsome work
@exsampel6 ай бұрын
Got me wanting to lift mine now lol LOOKS AWESOME!!!!
@mikewitdaOBS6 ай бұрын
Finally!! I’ve been expecting this for the past 3 videos😂 it looks great, but definitely go wide! I love the 26x14 look on mine
@justind9631
6 ай бұрын
That’s a sleek looking rig
@0791hd
6 ай бұрын
Ahh I remember you with the hardest Yukon
@JerryMorris-ke1jp6 ай бұрын
Makes me think on the obs Tahoe I wanted when I was 16
@MississippisHotGarage
6 ай бұрын
buy mine
@JerryMorris-ke1jp
6 ай бұрын
@@MississippisHotGarage lmao I wish but right now money is tight just spent a shit Ton of money on my now ex for her Christmas
@wesleydean42286 ай бұрын
Man, trusting your life with those harbor freight jacks…. Throw an extra Jack under there just for safety.
@stevelassetter30722 ай бұрын
Looks great Bro! Great video!👍🏼
@NSG_Sanctio6 ай бұрын
I think the add a leaf and crank the keys some is a must especially with wides. But it looks good brother keep up the amazing work!
@gascencio946 ай бұрын
That’s a sick truck reminds me of my dad’s lifted suburban he had
@V_RB6 ай бұрын
Great video!! Lower valance on for sure. Also, I would throw those add a leafs in. That rear needs a little more.
@user-qx3ed6mf4m6 ай бұрын
Keep up the good work👍.
@BADD4006 ай бұрын
Looks great with the 6” lift.
@austinjohnson8931Ай бұрын
Whew looks so good
@BigTrav3106 ай бұрын
Looks good man I dig it.
@bandit07246 ай бұрын
Looks sick love the vids!
@billydog15126 ай бұрын
Looks awesome 😎
@jamesrichards93386 ай бұрын
Looks really good man.
@RV-ds5uf5 ай бұрын
Looks badass!!👍
@trevdawg6.66 ай бұрын
Looks so good god I love that thing
@TheLawrence19993 ай бұрын
Im currently looking at a 4 inch lift kit for my 07 chevy silverado classic, Ive currently got it set up for overlanding with a camper shell on the back with full on bed and pull out drawers with 1 for tools and stuff and the other for food and a small stove. I really enjoyed this watching this, but I will admit that thing looks scrawny with those tires atm, I love the big bubbled out tire look.
@colossus57522 ай бұрын
Good job!!!👍
@TheDieseldog6 ай бұрын
I always think that body style needs the valence. Looks so good bro. Got me on marketplace looking at tahoes lol
@PhillAndDrill6 ай бұрын
24X12 ON THAT GONNA LOOK SO GOOD
@kahlilcaver17696 ай бұрын
HELL YEA🤘🏾
@danielmaldonado2586 ай бұрын
CLEAN!
@dulebrothers28506 ай бұрын
Love the vids keep up the good work
@ClayL-cu3fs6 ай бұрын
Looks good Chase. I like the height.
@theeclecticlifeАй бұрын
Pretty good video by the way, I like it
@blainegregory016 ай бұрын
No valence, looks sick tho, can’t wait to see the front end transformation
@danielgalyon96706 ай бұрын
With the valance for sure
@DILLIGAF11776 ай бұрын
Valance definitely
@pedeck36 ай бұрын
Looks good.
@ronrobicheaux32456 ай бұрын
Please add more support under that truck!! Those jack stands kick out way easier than you think I almost found out the hard way.
@williamchance7616 ай бұрын
And just like that, Denim stole the show!
@howiecowell66456 ай бұрын
Think it looks awesome just the way it is, even with the skid plate...not way over the top but just a cool lifted truck..!!!
@brandonmoss25616 ай бұрын
Love it! I think maybe some wheel spacers???
@CollinZ716 ай бұрын
YES🔥🔥
@Luke_986 ай бұрын
Keep it! Leave the valance, and slap some clapper exhaust on it
@michaelstaggs56666 ай бұрын
Looks good
@user-td8hc1iu3f6 ай бұрын
I think its perfect!
@nathanielbarnes1266 ай бұрын
Perfect
@markreid22795 ай бұрын
That’s so sweet
@thmper4u5 ай бұрын
Looks Amazing! I Have A 99 2 Door Tahoe I've Been Wanting To Put The Same Lift On, So Glad I Ran Across Your Vid Cause It Actually Looks Easier Than I Had Been Thinking It Was, I Kind Of Knew What Had To Be Done But Seeing It Done The Way You Did Gives Me Motivation, I Was Planning On Doing A 4" But I'm Curious If You Only Went 4 By Not Cranking The Keys And Using The Extra Leafs Or If It Actually Went Up 6" Cause I Like The Distance It Went Up Between The Arches So If Yours Went Up 6, Thinking 4 Might Not Be Enough, I Want To Run 33x14.50s On 20x14 Wheels
@singlepistonproductions32326 ай бұрын
Definitely need to throw big Betty’s set up on it next
@prestonmcdowell13516 ай бұрын
That thing looks tuff
@hunterwyche19696 ай бұрын
I like the valence
@kylevinson79206 ай бұрын
That yukon would look good on my wide set up. That I have on my tacoma during the summer. My truck is dark blue closely similar 22x12 -57 offset vision silver 360s on 35x14.50x22s interco iroks.
@davidhagenbuchjr22326 ай бұрын
Love it
@Fony_turgeson6 ай бұрын
you must be somewhere in the west that frame is clean ...i got my 2000 chevy z71 from colorado and it looks like this gmt400 is the best
@TuckerBlack6 ай бұрын
I think that thing needs some 16x14.5s micky Thompsons 8 whole wheels and some boggers
@colechaisson27186 ай бұрын
Looks good but I’d space the tires out by a half inch it would give it a better an more aggressive stance
@ericg4x44 ай бұрын
Nice video, no stupid talk acting like an idiot, great job. 15x10 or 15x12’s will fit nicely.
@JamesonHall17126 ай бұрын
Nice!
@CollinZ716 ай бұрын
15x10s with this one😉
@hxnterwelton31856 ай бұрын
definitely gotta do that frame now
@mattrussell17636 ай бұрын
All you need is a pro charger now
@tylerbuntin2976 ай бұрын
She's a proper boat now.
@dawudshabazz6776 ай бұрын
Love the fact that someone else besides myself love these four-door, Tahoe’s and you God’s great lift kit looks awesome
@that.1white.chevrolet6 ай бұрын
"if you pick a fit, you dont get your way" that kid bro😂
@103realtree2
5 ай бұрын
We get an education and a life lesson
@mitch45506 ай бұрын
Need to hit that frame with a brush and throw some black paint on it…like every other vehicle looks sick!!
@FreddyShoop6 ай бұрын
Definitely get some 12”-16” wides…anything less than that and it would actually still look good.
@Southrn_Maniacyago6 ай бұрын
Boggers on 16in rims would be killer
@redfox41166 ай бұрын
Yaaay what’s up man
@lmfscrew
6 ай бұрын
Yo yo
@redfox4116
6 ай бұрын
@@lmfscrewawsome look especially if you put on wides maybe a roof rack would look neat to definitely would be unique
@smizzyizzzy61946 ай бұрын
I recently put a 6 in lift on my 97 chevy stepside and I need to remove the leaf springs bc I put both that and the blocks so I need to take them off so it's squatted a lil
@Darjan_Spasojevic6 ай бұрын
Heavy Chevy boyyyy
@chrisnorris11776 ай бұрын
Needs some 20x12s now
@Jmeon4eva17 күн бұрын
YEE YEE!
@Theshadetreeshop5 ай бұрын
Hopefully the lift kit will be this straight forward to install on the squarebody.
@ryanhicks53716 ай бұрын
Clearance Clarence
@brycediven35956 ай бұрын
Im saving for a 7" lift on my 2007 Yukon Denali.
@thereallewolfe6 ай бұрын
You probably won't see this, but I was looking into getting a 6 inch lift for my 2005 tahoe 4x4, was wondering if you had any advice or any insights on how long it takes and how hard it is to do on GMT800s, thanks man, and great vid
@bradwalker85446 ай бұрын
Valance on looks a lot better
@stickperformance6 ай бұрын
GMC is tough throw some wheel spacers on it call it a day
@fideldelunaayala79376 ай бұрын
¡Gracias!
@lmfscrew
6 ай бұрын
Thank you!
@JRandallEllis6 ай бұрын
When your son said "When you throw a fit, you don't get your way." You should have said "Right. That only works for your mom."
@Ben_g0re6 ай бұрын
You should run some lift spindels in it if you find some
@owensanders82376 ай бұрын
Had my 0bs Yukon for 3 years that service engine light stayed on from the day I bought till sold. No matter how many times I’d clear it or try and fix it, Itd come right back within a day or so. Just an obs thing lol
@DUNOmaB4 ай бұрын
Can you tell me the Wheels and tires before the lift? I like that look. Any rub with that setup? Any mods/adjustments to achieve that setup?
@TaylorFirearms-4x46 ай бұрын
Now u just need to stuff 37 inch tires under there and it’ll be good and a grill guard
@420hondakid85 ай бұрын
yo i got a question so the thing that hooks to the steering and front crossmember is there post to be a size it post to be??
Пікірлер: 170
Put some 37/14.50/16 and some boggers on that thing
@homeofinventions
6 ай бұрын
BR-549
@matthewtittle9672
6 ай бұрын
Facts some saw blades and 37in boggers would go hard
@gregg.6853
6 ай бұрын
I was kinda thinking more of OG Larry set up with the polished aluminum bullet hole rims
@LS-lover02
6 ай бұрын
R16 is too small for 37s in my opinion.. 22s would be niceee
@cooperbryant785
5 ай бұрын
The tires he has on right now look damn near perfect already to me personally.
Good job! Lifted Suburban’s and Tahoe’s are definitely the do it all trucks to keep in the family forever. ❤
Thank you for the editing skill I hate fast forwarding since I pay for premium KZread and only watch content that is relevant Again thank you for the video
Great video, good job on video and work. I have 98 suburban , blue like yours . Unfortunately I payed someone to install my lift they did a horrible job on it, Now that I see your lift you working on your truck , I think I should have done it myself. By the way for those of you that live in Cali, sylmar area shops name is Omar’s tire!! Took for ever and horrible job!
Looks great, I love the quality of your videos, definitely one of the best guides out there!
Looks good those electric folding steps would be sick aswell!!!
Keep the valance. It gives it that clean “factory lifted “ look especially with the reps on it
Looks perfect👌 keep the valance. Now that's what a truck is supposed to look like💪
I've been thinking on lifting my 98 GMC k2500 for a while now but there isn't hardly any videos for me to know exactly what I'm doing. This video helped a ton love the truck. Great video. Well worth watching.
I have the same lift on my 97 suburban with l45 motor swap, multiport injection upgrade, monster custom built transmission, black bear computer, heavy half rear-end swap, and tons more... runs great... love this build for sure..
Great video and perfect amount of detail! Definitely leave the valence on and keep it just how you have it otherwise! Fantastic looking OBS Yukon!
Bro your channel is growing so much I remember first watching you because I have the same truck and now you’re getting hundred of thousands of views constantly!!! Bro KEEP UP THE GRIND AND KEEP THE COMMON MAN CONTENT COMING
Thanks for video man it looks good. Makes me want to lift my 94 suburban now lol. Keep up the good work God bless
Love the content man been watching you’re videos for about 3 years now
LOOKS AWESOME and GREAT music!
Love everything you do on the vehicle’s, great job!
Love the longer videos man! Keep up the good work
Man I like the way you work!! Old Marine.
That's a lot of work to do by yourself. Looks great!
Nice Truck and great video. Very good job explaining everything.
Looks good. Now all that's lacking are some welds, an aggressive mt, and some clear side markers👍
keep up the awsome work
Got me wanting to lift mine now lol LOOKS AWESOME!!!!
Finally!! I’ve been expecting this for the past 3 videos😂 it looks great, but definitely go wide! I love the 26x14 look on mine
@justind9631
6 ай бұрын
That’s a sleek looking rig
@0791hd
6 ай бұрын
Ahh I remember you with the hardest Yukon
Makes me think on the obs Tahoe I wanted when I was 16
@MississippisHotGarage
6 ай бұрын
buy mine
@JerryMorris-ke1jp
6 ай бұрын
@@MississippisHotGarage lmao I wish but right now money is tight just spent a shit Ton of money on my now ex for her Christmas
Man, trusting your life with those harbor freight jacks…. Throw an extra Jack under there just for safety.
Looks great Bro! Great video!👍🏼
I think the add a leaf and crank the keys some is a must especially with wides. But it looks good brother keep up the amazing work!
That’s a sick truck reminds me of my dad’s lifted suburban he had
Great video!! Lower valance on for sure. Also, I would throw those add a leafs in. That rear needs a little more.
Keep up the good work👍.
Looks great with the 6” lift.
Whew looks so good
Looks good man I dig it.
Looks sick love the vids!
Looks awesome 😎
Looks really good man.
Looks badass!!👍
Looks so good god I love that thing
Im currently looking at a 4 inch lift kit for my 07 chevy silverado classic, Ive currently got it set up for overlanding with a camper shell on the back with full on bed and pull out drawers with 1 for tools and stuff and the other for food and a small stove. I really enjoyed this watching this, but I will admit that thing looks scrawny with those tires atm, I love the big bubbled out tire look.
Good job!!!👍
I always think that body style needs the valence. Looks so good bro. Got me on marketplace looking at tahoes lol
24X12 ON THAT GONNA LOOK SO GOOD
HELL YEA🤘🏾
CLEAN!
Love the vids keep up the good work
Looks good Chase. I like the height.
Pretty good video by the way, I like it
No valence, looks sick tho, can’t wait to see the front end transformation
With the valance for sure
Valance definitely
Looks good.
Please add more support under that truck!! Those jack stands kick out way easier than you think I almost found out the hard way.
And just like that, Denim stole the show!
Think it looks awesome just the way it is, even with the skid plate...not way over the top but just a cool lifted truck..!!!
Love it! I think maybe some wheel spacers???
YES🔥🔥
Keep it! Leave the valance, and slap some clapper exhaust on it
Looks good
I think its perfect!
Perfect
That’s so sweet
Looks Amazing! I Have A 99 2 Door Tahoe I've Been Wanting To Put The Same Lift On, So Glad I Ran Across Your Vid Cause It Actually Looks Easier Than I Had Been Thinking It Was, I Kind Of Knew What Had To Be Done But Seeing It Done The Way You Did Gives Me Motivation, I Was Planning On Doing A 4" But I'm Curious If You Only Went 4 By Not Cranking The Keys And Using The Extra Leafs Or If It Actually Went Up 6" Cause I Like The Distance It Went Up Between The Arches So If Yours Went Up 6, Thinking 4 Might Not Be Enough, I Want To Run 33x14.50s On 20x14 Wheels
Definitely need to throw big Betty’s set up on it next
That thing looks tuff
I like the valence
That yukon would look good on my wide set up. That I have on my tacoma during the summer. My truck is dark blue closely similar 22x12 -57 offset vision silver 360s on 35x14.50x22s interco iroks.
Love it
you must be somewhere in the west that frame is clean ...i got my 2000 chevy z71 from colorado and it looks like this gmt400 is the best
I think that thing needs some 16x14.5s micky Thompsons 8 whole wheels and some boggers
Looks good but I’d space the tires out by a half inch it would give it a better an more aggressive stance
Nice video, no stupid talk acting like an idiot, great job. 15x10 or 15x12’s will fit nicely.
Nice!
15x10s with this one😉
definitely gotta do that frame now
All you need is a pro charger now
She's a proper boat now.
Love the fact that someone else besides myself love these four-door, Tahoe’s and you God’s great lift kit looks awesome
"if you pick a fit, you dont get your way" that kid bro😂
@103realtree2
5 ай бұрын
We get an education and a life lesson
Need to hit that frame with a brush and throw some black paint on it…like every other vehicle looks sick!!
Definitely get some 12”-16” wides…anything less than that and it would actually still look good.
Boggers on 16in rims would be killer
Yaaay what’s up man
@lmfscrew
6 ай бұрын
Yo yo
@redfox4116
6 ай бұрын
@@lmfscrewawsome look especially if you put on wides maybe a roof rack would look neat to definitely would be unique
I recently put a 6 in lift on my 97 chevy stepside and I need to remove the leaf springs bc I put both that and the blocks so I need to take them off so it's squatted a lil
Heavy Chevy boyyyy
Needs some 20x12s now
YEE YEE!
Hopefully the lift kit will be this straight forward to install on the squarebody.
Clearance Clarence
Im saving for a 7" lift on my 2007 Yukon Denali.
You probably won't see this, but I was looking into getting a 6 inch lift for my 2005 tahoe 4x4, was wondering if you had any advice or any insights on how long it takes and how hard it is to do on GMT800s, thanks man, and great vid
Valance on looks a lot better
GMC is tough throw some wheel spacers on it call it a day
¡Gracias!
@lmfscrew
6 ай бұрын
Thank you!
When your son said "When you throw a fit, you don't get your way." You should have said "Right. That only works for your mom."
You should run some lift spindels in it if you find some
Had my 0bs Yukon for 3 years that service engine light stayed on from the day I bought till sold. No matter how many times I’d clear it or try and fix it, Itd come right back within a day or so. Just an obs thing lol
Can you tell me the Wheels and tires before the lift? I like that look. Any rub with that setup? Any mods/adjustments to achieve that setup?
Now u just need to stuff 37 inch tires under there and it’ll be good and a grill guard
yo i got a question so the thing that hooks to the steering and front crossmember is there post to be a size it post to be??