6.5 DIESEL ENGINE - HOW TO BOMB PROOF IT

www.enghmotors.com/default.aspx
www.heathdiesel.com/
leroydiesel.com/
ptwiringsolutions.com has a great set a of battery cables to replace the WEAK stock ones.

Пікірлер: 631

  • @Yankeeprepper
    @Yankeeprepper8 жыл бұрын

    One other item I wish I had mentioned is this vid would be replacing the BATTERY CABLES. PTWIRINGSOLUTIONS.COM has a great set of battery cables to replace the crappy stock ones.

  • @ronaldreed7698

    @ronaldreed7698

    6 жыл бұрын

    Yankee Prepper - Preparing for the Wrath of God and Fine Coffee. I bought an 86 w/6.2 4x4 auto. It was a beautiful truck but was told it needed an engine. I saw the crossover cable to main Bart was maybe a #8 and of course starter was shot. I put a cable and starter on charged up crappy batteries and put charger on boost, varoom, started but smoked (fuel) changed fuel filter and this low mileage truck was one of the better trucks I've ever had. I put 150,000 miles on it and never had an issue other then normal wear and tear and maintenance .I averaged 20--24 mpg and never took it easy,

  • @sierragrande576

    @sierragrande576

    Жыл бұрын

    The battery wiring... Yep I burnt up 2 starters. Then I built some 1/0 cables myself. Starts like crazy now.

  • @tyronegreen9441
    @tyronegreen94416 жыл бұрын

    Just bought a 95 chevy 6.5 turbo diesel. It has 88000 miles. I have changed the lift pump. And if it wasn't for you I would have not known to do that. Thank you and God bless

  • @SuperVstech

    @SuperVstech

    4 жыл бұрын

    If you still have the truck, let me know! We 95 owners need to stick together!

  • @BrandonCorby-wr5nd

    @BrandonCorby-wr5nd

    4 жыл бұрын

    Had a 94 GMC was a beast. Until that chip he showed bent my rods.

  • @milanhernandez9165

    @milanhernandez9165

    3 жыл бұрын

    I bought a Chevy 1994 Diesel 6.5 but won’t start

  • @BrandonCorby-wr5nd

    @BrandonCorby-wr5nd

    3 жыл бұрын

    @@milanhernandez9165 Most likely the PDM

  • @jacobscott7678

    @jacobscott7678

    3 жыл бұрын

    I'm putting a bigger diesel tank and new pump I have to wire a new fuel gauge because the old one dont work

  • @DualsportDisport
    @DualsportDisport Жыл бұрын

    Also don’t forget the harmonic balancer going bad and taking out the cranks. Good video

  • @annam1969

    @annam1969

    Күн бұрын

    Good ol Leroy.

  • @DanGoodShotHD
    @DanGoodShotHD6 жыл бұрын

    From a 1st time Diesel owner, Thank you for this video. I am taking all your tips and doing it this weekend.

  • @HeadlampMafia

    @HeadlampMafia

    5 жыл бұрын

    same here

  • @mikehardin7086
    @mikehardin70864 жыл бұрын

    I have to thank you sir! Your video inspired me to upgrade my 1984 GMC 6.2 diesel. All the details you suggested, I did on my 6.2 with the exception that mine is full mechanical injection and Banks Sidewinder Turbo kit. I sourced the entire motor belt accessory brackets from a 1996 6.5 motor. Everything bolts up with minor modifications. alternator, air conditioning pump, coolant pump, Walbro fuel pump, duramax fan, everything. My truck is so much better now. Very happy. No more belt squeal since I ditched the V belt drives. Again, thank you for your video.

  • @justplaneclever
    @justplaneclever4 жыл бұрын

    Awesome video. As a new '95 K2500 owner this video was a real eye opener. Thanks for posting and I'm a big fan of your sponsor. I'm proud to subscribe to somebody like you who is not ashamed of the gospel.

  • @metalman69201

    @metalman69201

    3 жыл бұрын

    Amen brother!! Nothing matters but Salvation!

  • @aleksiblomqvist1612

    @aleksiblomqvist1612

    2 жыл бұрын

    how is that truck? going to buy one when I can afford it since trucks are expensive here in europe....

  • @terrylunsford5085

    @terrylunsford5085

    2 жыл бұрын

    Amen

  • @knightjd22

    @knightjd22

    Жыл бұрын

    I just bought one too sir

  • @Corpse1984
    @Corpse19846 жыл бұрын

    "I get the fan out just to laugh at it" that made me laugh out loud

  • @ManleyHurd
    @ManleyHurd7 жыл бұрын

    Hey Yankee Pepper, I'm a 6.5 enthusiast too. Great Video and great points. I made a similar list of parts to address about 8 years back and glad to see I was on the right track for the issues. I wanted to let you know why the engineers went with the crappy vacuum pump in the worst location. It was to meet California Smog requirements. In California a stock turbo could not be manually controlled in a Smog regulated year, which ended up being any diesel newer than 1998. Manufacturers were give the head up to well before the regulation was requires and why every turbo 6.5 after 93 has a vacuumed controlled and computer monitored turbo. The engineers knew this would be one the first mods for a 94-97 6.5 so they just did what any engineer would do, went with the cheapest, easiest way to solve their problem at the production end. I just wished they would have made them easier to remove.

  • @CountryBoyPrepper
    @CountryBoyPrepper8 жыл бұрын

    I'm buying a 99 GMC Suburban 2500 6.5L 4WD this week based mostly on your advise. I'll be "bomb proofing" it asap.

  • @garryandrychuk9659

    @garryandrychuk9659

    3 жыл бұрын

    I bought a 97 Chevy 2500 suburban 4×4 ,6.5 diesel 7 years ago,it now has 330.000 klms,its had an easy life,,a very strong solid vehicle,,,thanks for the upgrade information, I'm planning on keeping mine for a long time,its great for hauling and towing.

  • @japdog9

    @japdog9

    3 жыл бұрын

    hi all . its been 5 years , how did the bulletproofing go

  • @QuesoPants

    @QuesoPants

    2 жыл бұрын

    @@japdog9 some say he is still trying to start it to this day lol

  • @thanasisnarliotis6404

    @thanasisnarliotis6404

    23 күн бұрын

    Lol now it's my turn. Just picked up 99 2500 suburban 6.5 will be doing all this asap

  • @AngeloHerrera-ow3po
    @AngeloHerrera-ow3po4 жыл бұрын

    Grab that vacuum pump and throw it away, it “sucks” I laughed at that 😂😂

  • @terrypyne9888
    @terrypyne98885 жыл бұрын

    Thanks for taking the time to prepare and share this video with us. I was contemplating selling my Chevrolet 2506.5 L turbo diesel. I have no reconsider that and I am anxious to make changes. I had already replaced the mechanical fuel pump twice in the 87,000 Miles I put on the truck so far. The first time it was covered under warranty, but not the second. I’m still working the fuel flow issue I’m having right now to get it running again and I’m hoping that I have to replace is the fuel pump, bypass the safety switch for rollover and move the electronic module to a position That is cooler. Thanks again

  • @edgarjordan8819
    @edgarjordan88197 жыл бұрын

    very happy i found this video. i just got my brother 98 6.5L. I had heard nothing but bad things about this engine but have been doing my homework and found things to do to eliminate the problems. This video has everything i wanted to know so i will be buying the other 2 parts as the pmc has already been relocated. thanks for this

  • @ih1206
    @ih12068 жыл бұрын

    Man I wish I had found this about 2 months ago. I seriously looked into buying a nice 97 6.5 just to drive back and forth to work and parts runs for the farm. I walked away from it, everyone I talked to that owned one had horror stories about them, most would have been fixed with what you showed in the video. Great educational video that anyone looking into buying a 6.5 should know.

  • @hbsbidjj3262

    @hbsbidjj3262

    2 жыл бұрын

    I’m hoping to look at one this weekend. Making sure I can get a new reliable daily for not too expensive

  • @Jean_1999

    @Jean_1999

    Жыл бұрын

    Literally dont understand why you need to bomb proof these engines one here in germany is for sale that got 434k miles on the odometer. Dont think that 434k Miles is low mileage.

  • @astralnut6313

    @astralnut6313

    Жыл бұрын

    I rebuilt a 1996 K2500 surplus. Had to totally rebuild the fuel delivery system, rebuilt the transmission and it ran great except the PMD but we got that fixed.

  • @J-Rod7

    @J-Rod7

    Жыл бұрын

    ​@@Jean_1999The 6.5 hate is weird, these trucks are like $2,000-$5,000 in the U.S for clean ones. $2,500 in bullet proof parts and turbo/intake work and you have a strong reliable diesel.

  • @ronnor58
    @ronnor587 жыл бұрын

    in a Ford owner...aside from that, I love guys like this, true mechanics that know their s--t, my hat is off to you and all you do for people to help them better understand their equipment, thank you for the video...Yankee prepper...you rock my friend

  • @Yankeeprepper

    @Yankeeprepper

    7 жыл бұрын

    Thanks man. I enjoy it.

  • @maxeickman4736

    @maxeickman4736

    4 жыл бұрын

    Yankee's Journey and Fine Coffee. Absolutely great video. You know your shit...some engineers did not or chose to ignore

  • @bradlujan6537

    @bradlujan6537

    3 жыл бұрын

    Truth, I’m a ford guy too, i have a 7.3 idi and i wish there was as detailed of a video out there for bullet proofing those, i know there is the cdr but i bet other then the harder parts like sleeving the motor to completely prevent cavitation in the cylinders i can almost guarantee there are more things that can be done

  • @nathanowens1721

    @nathanowens1721

    3 жыл бұрын

    @@Yankeeprepper if I may ask (I know this video is a little older now) what were you running your 6.5 in vehicle wise and what was your power and Mpg when you ran your different tunes?

  • @Yankeeprepper

    @Yankeeprepper

    3 жыл бұрын

    @@nathanowens1721 95 GMC Suburban. 20-22 plus mpg...very dependent on how you drive it, but at 70mph with the kids and dog and loaded with gear it's a 20-22 plus mpg all day. I have no idea how much "power"...whatever that is.... this is not a "power" diesel. I always stay under the recommended towing capacity and that was easy for me, I am not hauling cattle to the ranch.

  • @Dani2wheels
    @Dani2wheels7 жыл бұрын

    About 9 months ago I started looking for a truck. I ran across a 6.5, 97 suburban. I hesitated for about a week after first viewing it. It was the first vehicle I actually saw in person while on my truck hunt. But at this point, I'm SO glad I bought it! It's hands-down my favorite vehicle I've ever owned and I'll never sell it. As some of the comments suggest, it's a very rare vehicle. Well, only after my purchase did I realize that. At the time I wasn't even aware Chevy put a diesel in any of their suburbans but damn, did I find a gem! Thanks for a great video, I already have the PMD mod but I'll be looking into the others.

  • @blakemorton9190
    @blakemorton91904 жыл бұрын

    Just put a new transmission in a 6.5 farm truck, was looking to extend the life of the motor and beef it up as well this helped a lot

  • @southerndiy1
    @southerndiy13 жыл бұрын

    I’m in Aus and the Holden (Chevy) Suburban was sold here in the late 90s/early 2000s. I’ve always wanted one- especially the 6.5 turbo diesel. Your video makes me more confident to buy and maintain one, thank you 👍

  • @countrieboyz2009
    @countrieboyz20097 жыл бұрын

    I just bought a 95 6.5 2500 Chevrolet. and will be looking into all this you have mentioned. thanks so much

  • @charlesbryan7184
    @charlesbryan71844 жыл бұрын

    Great video and I'm just now working on my 95 6.5, so perfect timing for for these upgrades. Thanks for the info

  • @xskyxdaddyx4889
    @xskyxdaddyx48898 жыл бұрын

    Thank you ever much for the video. I owned a 6.5 when I was 18 now 10 years later I want another. because I love the truck cause love the body style and love diesels too

  • @odelldickey2218
    @odelldickey22186 жыл бұрын

    I really like your sponsor/scripture. Your video is practical and provides good valuable knowledge to keep your truck and its 6.5L diesel lasting a long time. Keep up the good work! Have a blessed day!

  • @reekkeel
    @reekkeel6 жыл бұрын

    I have to admit, I cringed when you said; a word from my sponsor. I anticipated some lame commercial. Was just so happy to know that you use every opportunity to spread the good news! Bless you brother!

  • @markdavis6066

    @markdavis6066

    4 жыл бұрын

    reekkeel for real

  • @Omegadoomship

    @Omegadoomship

    3 жыл бұрын

    I was thinking the same thing. That “sponsorship” made me smile.

  • @trashman1694

    @trashman1694

    3 жыл бұрын

    I thought the sponsor was going to be beer

  • @erickvallad4189

    @erickvallad4189

    2 жыл бұрын

    God bless ya bro(s)!!!

  • @terrylunsford5085

    @terrylunsford5085

    2 жыл бұрын

    Amen, God bless you sir

  • @budwhite3570
    @budwhite35706 жыл бұрын

    Thankyou very much for the video, since I own a 97 c2500 6.5l, and there have been "problems", chief among them is when I bought the truck in Oregon in 2013 I noticed the entire fuel system was only a year old or less, and that included the injector pump, ALL fuel lines, and even the tank, having been used by a business for bring back valuable industrial items purchased at estate sales and auctions out of state. Apparently, by winter of 2013 I figure out why, .....the fuel would stop moving through the fuel line from the tank to the engine, shutting off the engine while I was at high speed. I figure out how to push compressed air through the line to clear it, but then the factory lift pump would sometimes overheat and stop working. I stopped driving the vehicle much at all as a spare, and kept high dollar fuel anti jelling additive in the fuel, good thing too cause it would go six months unused. I bought an airdog aftermarket fuel system, but I had a death in the family, hurt my back and was unable to crawl around in my driveway to fix with the airdog,....I just installed the airdog completely with a beans sump kit by cutting a hole in the bottom of the tank, the metal tank. I am pleased, engine runs great, seems to use more fuel and that makes sense cause the original lift pump was starving the engine, and in Oregon we have "clean air diesel", meaning too much alcohol added to the diesel, to save the planet and the air, which is what almost got me killed with engine stoppage twice at over fifty miles an hour. I want to do that belt thing you talk of, a 93 belt and eliminate the vacuum pump, I am sure its still there no doubt, and I need to figure out what you mean by "manual waste gate controller" in its place. I already have an aftermarket PMD on the inner fender well with heat sink. I need this truck and many of its components to last, cause I can't afford any major repairs for awhile, I should as soon as possible even if I have to sell something off get a better fan like you mention to keep it cooler. I am unsure how many actual miles are on the engine cause it was a replacment for some reason with a lower mileage engine, and just before I bought it they had the transmission, clutch, and differential limited slip replaced new/rebuilt cause they were stuck in LA California with almost a hundred thousand dollars of industrial equipment in a trailer, so I lucked out, along with new brakes, air conditioning, newer tires, the entire fuel system I mentioned, and a new trailer brake system. By the way, my newer fuel lines are larger 3/8 style from the bottom of the tank to the airdog then to the coupling to the original line to the engine. I would like to have a backup marine pump at the original spot for the old factory lift pump cause the fuel straw in the tank no longer has the plastic mesh filter since I removed it when I cut into the tank,....it was right as the spot I cut into the tank luckily, and I want to do that and cap it off but keep an adaptor set to quickly hook it up if I was out of town and the airdog suddenly went bad or whatever so wouldn't be at the mercy of high priced out of town repairs,...well actually, right now I wouldn't be able to afford it. I just hope my injector pump with way less than 3000 miles on it was not damaged by all the damned lift pump and jelling problems, and numerous times likely injecting some small amount of air once I opened the lines, I mean, I always tried to open the drain cock T at the front the engine till I saw pure fuel flowing, or even loosen up the top of the filter cap to all air to escape, I know better, I mean, I was once ASE certified in diesel mechanics, and military trained, the only saving grace is I didn't drive the truck much at all the last four and a half years. It was the alcohol in the diesel I mentioned, and now they have the "Clean diesel act" applying to commercial use diesel for fleet vehicles, which is causing alot of damages, ....here in Oregon, stories of school buses in rural routes in the middle of snowing winter breaking down with a load of kids waiting for two hours for a relief bus to come to the rescue and thousands of dollars in repair cause of poor quality state guv mandated touchy feely liberal libtard fuel,...maybe I, well I just thought of a name, .....democrat diesel, ...sure weren't any republicans that were responsible for this "clean diesel", I mean, it bout cleaned me out of life itself, and cost me and so many others so much money. I've heard of diesel with nearly thirty percent water,....I almost need like two or three water separators instead of the one on the airdog, to drain out all the water, I mean, it angers me to think I am buying so much water when I am supposed to get fuel.

  • @mattschneeflock7485
    @mattschneeflock74858 жыл бұрын

    I have a 94 K2500 4x4 suburban with the 6.5 turbo diesel, I love this truck and will be doing some of the upgrades talked about in this video

  • @leonardschleuning3070

    @leonardschleuning3070

    5 жыл бұрын

    Matt Schneeflock I’m considering swapping the 454 in mine out for a 6.5 and after seeing this, I can’t really think of a reason not to do it.

  • @jaceervin8408

    @jaceervin8408

    4 жыл бұрын

    Leonard Schleuning if you end up doing it could you post it somewhere? I want to do the same to my 98

  • @ronsoderberg6542

    @ronsoderberg6542

    Жыл бұрын

    @@leonardschleuning3070 I

  • @toshibavoodoo
    @toshibavoodoo8 жыл бұрын

    From your last video I checked Autotrader and for a Diesel Suburban. out of 10,000 plus Suburban's for sale in the USA, only 3 are for sale with a diesel Engine. You got a real treasure their my friend.

  • @Yankeeprepper

    @Yankeeprepper

    8 жыл бұрын

    +toshibavoodoo I do know that. It's been a very good rig for me and I intend on keeping it till I am dead or they lock me in the FEMA camp. However, I am currently looking for a diesel suburban that has a blown motor to buy a Military Optimizer 6.5 diesel engine for. I figure I better have 2.

  • @chadalcock7275

    @chadalcock7275

    7 жыл бұрын

    I kind of wish I would have kept mine.

  • @05EVORS

    @05EVORS

    4 жыл бұрын

    Why a Dmax Allison hasnt made its way into Burbs and Tahoes even Escalades is beyond WTAF. Here in CA people have the conversions w out of state plates bc some 'engineer/scientist' for CA epa convinced lawmakers its should be illegal to change fuel type from OEM as it 'alters' the intended carbon footprint of the state lol....Those are the guys that belong in the Fema camps 1st and foremost

  • @paulmullee6206
    @paulmullee62062 жыл бұрын

    Awesome video, rebuilding a 94 for my son and really appreciate your expertise.

  • @anthonyamthor5604
    @anthonyamthor56047 жыл бұрын

    What a great video! Inspiring, educating and entertaining. Just bought a 98 silverado 2500 6.5. with 212,000 miles. Thanks!

  • @stevenator117
    @stevenator117 Жыл бұрын

    Definitely looking forward to upgrading my 86 6.2 from the belt drive of a newer version of it to the other modifications needed in this video since most of it is mechanical great job putting this together brotha you’re awesome

  • @nicholastrvn69
    @nicholastrvn694 жыл бұрын

    Wow! I wish I would have seen this years ago! I so miss my 6.5 diesel. Thank you so much for putting this out there 🤙🏽

  • @JHorse508
    @JHorse5086 жыл бұрын

    I have a 93 6.5 and its been an extremely good hd 4x4 asides from the garbo fuel pump

  • @DocVanfox
    @DocVanfox7 жыл бұрын

    great video sir I appreciate your knowledge that you've passed on to us. I'm looking to get a 6.5 myself. I really want one that GM placed in a half-ton truck. thanks again.

  • @dazzleexe2865
    @dazzleexe28655 жыл бұрын

    The words from your sponsor made me cry. Oh the beauty of the love. Thanks for the video and blessings abound, friend!

  • @ewsnwfl
    @ewsnwfl7 жыл бұрын

    Great video with very valuable information. I have done all of the things except for the fuel pump relay (I think that will be next). I have Heath's Stage 2 towing and performance kit. Sadly, I am not really happy with it at this time. My water temps are around 220 and the truck seems to laboring with a measly 8100 pound load (new 5th wheel). Without the trailer, I am VERY HAPPY. I have contacted Joe Heath to see if there is a tuning fix. Keep the videos coming!

  • @robtdougherty

    @robtdougherty

    Жыл бұрын

    any update? was the issue resolved? thank you,

  • @jesseporter6362
    @jesseporter63626 жыл бұрын

    You helped me so much in 14 minutes, defiantly not scared to buy a 6.5 now

  • @SuperVstech

    @SuperVstech

    4 жыл бұрын

    Jesse Porter did you get one?

  • @hisnameisiam808

    @hisnameisiam808

    4 жыл бұрын

    @@SuperVstech I did!

  • @survivalburban1597

    @survivalburban1597

    3 жыл бұрын

    Facts I have a 6.5 diesel I had to move that heat sync also I didn’t know about the other to and that deserves a like and subscribe very well laid out very well described just all-around great explaining these videos we need more of people like you that really points and shows and tells you

  • @gc99289

    @gc99289

    3 жыл бұрын

    You buy one with cracked block.....nothing to bomb proof that then.

  • @metalman69201

    @metalman69201

    3 жыл бұрын

    I got a 1993 GMC K 3500 with single rear wheels and the manual NV4500 5-speed tranny and with the 1993 6.5 diesel you don't have to worry about the PMD because it is a totally mechanical engine and would survive Solar Flare or EMP attack just as it is!!

  • @Emiajtruk
    @Emiajtruk8 жыл бұрын

    I can only imagine how they open up their meetings at the factory: "We're GM diesel engineers and we're here to help!"

  • @jasonw2222

    @jasonw2222

    7 жыл бұрын

    Look Up Detroit Diesel Series Two-Stroke Blower motors! GMC! 1938 till about 2000! Still in use on the roads, oceans and rails! Tanks a couple WW! Mostly interchangeable parts one cylinder to 24

  • @gmcdenali7178

    @gmcdenali7178

    7 жыл бұрын

    Duramax engines are bomb proof After all the emission bullshit is deleted But with LB7s... replace the injectors and gaskets and you're fine

  • @Timberbeartrail

    @Timberbeartrail

    3 жыл бұрын

    LMAO... Yup they are there to help empty out wallet is what they're there for 🤣🤣🚫

  • @Justin-vi2eg

    @Justin-vi2eg

    3 жыл бұрын

    Sounds like Biden nowadays

  • @Wendicoon76
    @Wendicoon76 Жыл бұрын

    I've been thinking about swapping my 5.7 vortec for a 6.5 but I've just heard a lot of bad stuff about them but this video really helped thanks

  • @RisingPhoenixCustoms
    @RisingPhoenixCustoms7 жыл бұрын

    Thank you for this video man. I love these engines, we have 3 of them. 2 of them are trucks and one is my suburban. I knew a lot of the stuff you were talking about, but I picked up a lot of other things I never knew about. This will help me in the future. Thanks again! and that engine you have is amazing!

  • @michaelstjohn-ho5is
    @michaelstjohn-ho5is Жыл бұрын

    Yankee! Not sure how often you check this anymore, but been a long time fan of your content. Hope you are doing well. Your videos on vehicle maintenance, mission specific footwear, coffee beans, food prep, hunting…all gold! Thanks for putting it out there. Best to you and the family.

  • @Yankeeprepper

    @Yankeeprepper

    Жыл бұрын

    Well, you are welcome to watch them as many times as you want too, but I am not making anymore of those vids and haven't a in a LONG time. Until men get back to the Lord and raise their testosterone level back to the point they can figure out which gender they are and which bathroom to use ....none of that other stuff is really going to matter. The future of this country at this point is on a fast track to hell.

  • @annam1969

    @annam1969

    Күн бұрын

    ​@@Yankeepreppervery true.

  • @FloridaHockeyFan
    @FloridaHockeyFan3 жыл бұрын

    Just won a 98 2500 6.5 turbo diesel from an auction. It's a D.O.T. vehicle. If they havent made the first 3 changes I'll be doing them immediately. This video was very helpful. Ty

  • @DDescalchuk57
    @DDescalchuk575 жыл бұрын

    I had 30 horse injectors, pmd mounted on the driver side fender, Homebuilt boost controller AFE cold air 4” exhaust 90 gph fass fuel Had the L65 motor in it Running 16-20 pounds of boost the truck was absolutely awesome 900 ish km per tank truck was unstoppable

  • @JHorse508
    @JHorse5087 жыл бұрын

    just bought a 93' 6.5 dually extended cab with 117k original miles 1 owner, I plan on copying your setup too achieve maximum durability and reliability.

  • @yowtrucking3914
    @yowtrucking39145 жыл бұрын

    I have a 95 Chevy 2 door Chevy Tahoe with 6.5 diesel, thanks for the advice I've done most all ready, will take the air pump off, it runs grate, will go anywhere I need to go.

  • @SuperVstech

    @SuperVstech

    4 жыл бұрын

    yow trucking awesome! I like the burb I have. Lemme know if you need tips on yours!

  • @ryanburbridge
    @ryanburbridge8 жыл бұрын

    Thank you!! That was very informative. I have read the forums but seeing it on KZread is better!

  • @alfredolobo8573
    @alfredolobo85734 ай бұрын

    🎉🙏👌🏽 best video ever! What a nice job!! I have a a 95/ Chevy 2500 4x4 6.5 turbo diesel and you save my life. Thank you so much brother.

  • @johnwayne8178
    @johnwayne81785 жыл бұрын

    Love the channels handle the video and the sponsorship is what earned you a sub

  • @T_L_
    @T_L_7 жыл бұрын

    I picked up a 94 k2500 6.5 with 142k miles for $3k last week. Hopefully I'll get it bomb proofed within the year. Thanks for the vid!

  • @toshibavoodoo
    @toshibavoodoo2 жыл бұрын

    6 years later, still looking for this truck!

  • @PRSH8YAPROJECTS
    @PRSH8YAPROJECTS3 жыл бұрын

    One of the best videos I have seen in a long time

  • @gwp1ohio
    @gwp1ohio7 жыл бұрын

    I'm looking now to get rid of my $600 per month truck payment to purchase a used older suburban diesel (no payment). great vid and info. as always. thanks.

  • @NKPGarage
    @NKPGarage Жыл бұрын

    Fantastic video. 6yrs old and still relevant. I just picked up an H1 hummer with a variation of this motor and will be going through it in the next couple months to upgrade where it makes sense. Already moved the PMD to a better location. Great tip on the Duramax fan and clutch and thermostats, I'll be doing those for sure because this thing runs at 215-220 degrees on the highway. Any particular thermostat you like to use on them?

  • @TheEdster1981
    @TheEdster19813 жыл бұрын

    My dad just gave my son his 95. He's got plans for it👍

  • @chriswatkins6222
    @chriswatkins62223 жыл бұрын

    Oh man thank you for posting this I am so glad and I will be saving this for future use I just bought mine yesterday I already have plans on going down the aftermarket isle

  • @hisnameisiam808
    @hisnameisiam8084 жыл бұрын

    I bought my 1999 suburban with 233000 miles on it because of your videos. Thank you.

  • @mikemoon5077
    @mikemoon507711 ай бұрын

    Going to work on updating my current 6.5 and build out my old tired one with this knowledge. Thanks

  • @neddym6400
    @neddym64008 жыл бұрын

    Awesome video mate, having all sorts of issues at the moment and will be definitely be doing these mods since everything you mention has pointed to them... cheers buddy.

  • @Yankeeprepper

    @Yankeeprepper

    8 жыл бұрын

    Good solid engine if used within it's limits and mod'ing these few simple and cheap items!

  • @LuisSanchez-gh5xk
    @LuisSanchez-gh5xk3 жыл бұрын

    Thanks so much for this video, I love my 1994 6.5 you have solved all of my problems. I'm really going to stick to your recommendation for sure.

  • @sllence2328
    @sllence23284 жыл бұрын

    Thanks a lot for the guide, this came up greatly useful for me . Keep it up. Now an 6.5 litre diesel Silverado owner :) Greetings from Ukraine !

  • @SuperVstech

    @SuperVstech

    4 жыл бұрын

    Sllence23 many items on this video only apply before the 96 model year.

  • @SchnelleKat
    @SchnelleKat6 жыл бұрын

    Good Video, Before this i didn't know much about the 6.5 except the DS-DB4 IP Pumps... etc that's about it.. all i know is Early Red block 6.2 Diesels..

  • @donaldp7520
    @donaldp75205 жыл бұрын

    Well done young man. I run a 1983 6.2 for 31 years. All mechanical.

  • @Nu2prepn
    @Nu2prepn8 жыл бұрын

    thanks for the effort you put in to these vids

  • @colorado8382
    @colorado83826 жыл бұрын

    I'm getting a 95 6.5 today and I'm bomb proofing it also thanks for the info

  • @merlegraff5493
    @merlegraff54936 жыл бұрын

    Great information, as I am just putting in a new long block in my 95 1ton single axle. Thanks

  • @frankleonard6570
    @frankleonard65703 жыл бұрын

    i love the 6.5 its a great engine my 94 is the best truck i ever owned! i drive it everyday 430000km on it and runs like new!

  • @ironworkable
    @ironworkable8 жыл бұрын

    I LOVED YOUR VIDEO. I WORKED on my 2000 c3500 HD all winter getting it ready for spring as a welding truck. I had it new kept it in a garage got in the pmd from Amazon and have no idea how to get to the connector. I want to do all the mods you did they are probably going to require me to remove the nose. Looked up the holbro lift pump it's gonna take time to select the right one.

  • @cropsey7

    @cropsey7

    8 жыл бұрын

    got it did it done

  • @budmoore8144
    @budmoore81448 жыл бұрын

    Great tips ive done most of these to my 6.5 just to keep it going they are tough and economical

  • @Yankeeprepper

    @Yankeeprepper

    8 жыл бұрын

    +bud moore (buckshot32000) Yes they are good engines for what they were designed to do. I have had relativity few problems with this vehicle overall. The 4l80e Trans and 14 bolt rear that the engine is connected to are some of the most reliable in the their respected category as well. The only real complaint that I have is the HVAC assembly behind the dash. The defrost doors kinda break off hinder the ability of the whole setup. This is common I guess on these trucks and suburbans. of these years. That a project for this year, sourcing a new HVAC assembly and taking the dash off to replace the old one. I am more afraid of take the dash off then taking the engine out!

  • @budmoore8144

    @budmoore8144

    8 жыл бұрын

    Yeah no matter where u turn the dial in my truck the air blows out the floor vents so I just reach up under the dash and change the mode manually

  • @Yankeeprepper

    @Yankeeprepper

    8 жыл бұрын

    +bud moore (buckshot32000) That's easy and CHEAP to fix!!! it's just one of the actuators and your problem indicated the easiest one to change! Remove 2 phillips screws, replace the actuator with a 20 bucks new one and it will be like new again for you.

  • @budmoore8144

    @budmoore8144

    8 жыл бұрын

    no the one that needs replaced you cant get to without pulling the dash i tried changing the easy ones no improvement

  • @Yankeeprepper

    @Yankeeprepper

    8 жыл бұрын

    +bud moore (buckshot32000) huh...in mine the left (drivers side) actuator controls the different air flows/defrost to floor and that one is easy to get to, the middle actuator controls the heat/cool mix and the right side controls the outside/inside air.

  • @Tree-feller
    @Tree-feller4 жыл бұрын

    Thanks for sharing all your valuable insights from first hand experience!! And Hey I love your sponsor!!

  • @freebuilder007
    @freebuilder0072 жыл бұрын

    Thank you for the really great video. I appreciate the work it took to remove the radiator and grill so we can See what you are taking about. Question: If I remove my vacuum pump, what do I do to actuate the waste gate on my Turbo? What is a manual waste gate and how is it controlled? Application is '97 2-door Tahoe with the 6.5L.

  • @Yankeeprepper

    @Yankeeprepper

    2 жыл бұрын

    I did this vid with this premise that a person would have the basics knowledge of how their vehicle works. This is not a good vid for someone just parroting. The vacuum creates tension on the wastegate....opening and closing while driving. A manual wastage creates tension using as spring. There are probably 100's if not 1000's of vids and diagrams on the internet showing manual wastegates. People even make them and sell them to people that can't make their own.

  • @hypersport0377
    @hypersport03772 жыл бұрын

    I love this video because I plan on keeping my 6.5 turbo diesel for a while. thank you for the advice!👍👍

  • @Yankeeprepper

    @Yankeeprepper

    2 жыл бұрын

    You are welcome. I am stilling running a 6.5 and got over 700 miles to a tank of fuel and still had a quarter left before I stopped to re-fuel last weekend on a trip from Minnesota to Illinois. Pushing 22 mpg at 70 mph/1950 rpm.

  • @jacobbrown8905
    @jacobbrown89053 жыл бұрын

    Thanks man! I've been hesitant on getting an old 6.5 but I'm gonna now

  • @jorgefonseca9225
    @jorgefonseca92258 жыл бұрын

    i agree 100% with you my friend you are really a good mechanick man i said now you have a exelent vedeos i enjoy watching because i like the 6.5 td detroit diesel model is a great engine, now i start change my traditional automatic transmission 4L80E for NV4500

  • @markdonlevey4330
    @markdonlevey43307 жыл бұрын

    Thanks, Great Info for us newbie's to the 6.5 world.

  • @vtailv35
    @vtailv357 жыл бұрын

    This a great Vid I have a 2000 6.5 and had to replace the injector pump and few other parts but it has not hit once fuel pump has 10psi but there's no fuel to injectors I'm not sure if it's the PDM it has been replaced I was looking for GM Tech2 scan tool to see if it would help your scan tool looks great for the money. I guess I'll look some more for info get this running again I've worked for last month trying to get it going keep the Vid's coming...

  • @PearComputingDevices
    @PearComputingDevices5 жыл бұрын

    I own an old '94 GMC Safari with the 4.3. It's no diesel of course, but it's a fine example of a good powerplant held back by GM. These mid 90's GMs however were easier to correct GM's planned adolescence than the newer stuff. I've always thought it would be neat to have a Diesel under the hood of that thing. Apparently a 350 fits without issue. But she's only got 132k on her so.. might not happen any time soon. I love your video, and your slogan. May god bless.

  • @jasonsprouse2803

    @jasonsprouse2803

    5 жыл бұрын

    4.3L and 350 are the same engine, front two cylinders are knocked off to make a 4.3L. It's been 15 years since I had an Astro..... you would probably have to go to an electric fan to make it work. You're talking 3 - 4 inches in difference of block length.

  • @BigDan12
    @BigDan127 жыл бұрын

    "I wish I had it, I got it around here somewhere. I take it out every once in a while to laugh at it." Lol, made me chuckle. That's what I do with my plastic thermostat housing from the Ford 4.0 engine.

  • @wolfmanrebel874

    @wolfmanrebel874

    5 жыл бұрын

    Lol, that's what I do with the entire ecoboost

  • @BassRocket

    @BassRocket

    5 жыл бұрын

    Daniel Johnson “just to be jackasses”

  • @humech
    @humech4 жыл бұрын

    I just replaced my stock lift pump, may have to look into getting a stronger one! Already have a relocated PMD and manual wastegate.

  • @bustedwrenchgarage2051

    @bustedwrenchgarage2051

    4 жыл бұрын

    Where did his blue hose go to if he dont have a vacuum pump

  • @SirGuidemere91

    @SirGuidemere91

    Жыл бұрын

    Long shot but what lift pump mode did you get

  • @GrowingPains917
    @GrowingPains917 Жыл бұрын

    Thanks for all the clearly laid out tips!

  • @dw7094
    @dw70943 ай бұрын

    Great video. Concise and straight to the point. No typical You Tube BS. I'm told that these 6.5 long blocks are still being made in Mexico?

  • @CaptainKnievel1
    @CaptainKnievel13 жыл бұрын

    Great video thanks!! I also have the same sponsor. I’m looking at a low mileage 1993 example and needed this video

  • @willydiesel2081
    @willydiesel20814 ай бұрын

    I had 11 trucks in my landscape business at a time maybe 10:00 and I had two 7.3 Powerstroke turbo diesels and I had a 1999 Chevy 3500 HD 6.5 turbo diesel and believe it or not I had a 1991 one owner I bought used Cummins Diesel and I believe it was a 3116 or 3106 caterpillar in the F650. I am here to tell you my personal truck was the Powerstroke but my 6.5 turbo diesel was so Zippy and so fun to drive but I did pretty much every thing that you mentioned those three had to be done at some time or another

  • @jjones9290
    @jjones92902 жыл бұрын

    This is the best video intro I've ever seen!

  • @007longbeach
    @007longbeach7 жыл бұрын

    I agree with the vacuum pump! LOL. I have to have vacuum for the heat/ac controls so I have a contentious duty electric vacuum pump.

  • @fastone942
    @fastone9426 жыл бұрын

    i have 93 C2500 HD 6.5 it come with a old fashion mechanical pump same as the 6.5 in hummvees outside i update the rocker arms no problems i did add a intercooler what a big change to how the engines runs i did not change the boost but it runs a lot cooler now towing i get 20 to 22 mpg towing a 8000 pound trailer driving at 75 after that the MPG starts to drop off if going faster i got it new now has 250000 miles and no plans to get rid of it and parts if needed are dirt cheap

  • @burtbrooks7731
    @burtbrooks77314 жыл бұрын

    The good lord is the ULTIMATE SPONSOR 💪👊loved that man👍

  • @raytothet7665

    @raytothet7665

    4 жыл бұрын

    Amen!

  • @hereintranzit
    @hereintranzit4 жыл бұрын

    I LOVE the ‘word from your sponsor’ !!!

  • @Yankeeprepper

    @Yankeeprepper

    4 жыл бұрын

    The only reason I am here.

  • @fr150046
    @fr1500466 жыл бұрын

    Thanks for your time brother ... you are the truth

  • @TheRevanchist
    @TheRevanchist3 жыл бұрын

    I'm getting a 94 K2500 with a 6.5 for my 86 R/90. I'll be following this as closely as I can.

  • @wayneyarian6404
    @wayneyarian64044 жыл бұрын

    I recently bought a 1997 GMC 3500 Dually with a 6.5, I did some research before buying it and watched your video's and that made my decision easy. I am slowly upgrading the truck, doing the important things first. I would like to know where you got the vacuum for the waste gate? I tried to look at the video but can't find it. I want to replace the fan belt with a 93 and do away with vac pump, put a high flow air cleaner, 4" exhaust and the HX5 turbo...I have confidence in the engine after watching the video's. Also glad you Love the Lord as a Christian man I appreciate honesty and integrity. I'm also a retired trucker that love's coffee! And now teach at a truck driving school....love those diesel's. Sorry for long rant, very interested in the upgrades. Thanks

  • @Yankeeprepper

    @Yankeeprepper

    4 жыл бұрын

    I just run a manual/spring tension waste gate.

  • @MrShaneBenjamin
    @MrShaneBenjamin8 жыл бұрын

    Thanks Yankee Prepper! I bought a billeted waste gate actuator set @14psi because I havent had any problems with my vacuum pump, yet. Also Made my own down pipe adapter with the wastegate ported into the downpipe.(Ididnt like the PT version it seemed to restrictive) I did get a waste gate controller from pt wiring just in case the pump did go and I was stuck some ware . When you were adjusting the tension did it through codes on you?

  • @duncdunc76
    @duncdunc767 жыл бұрын

    Awesome tips for a 6.5 owner! Id like to try and get 500,000 out of my 1994 Suburban 2500 before needing a rebuild so I will definitely be doing most if not all of these upgrades to mine. Thanks So much for the great Vid!

  • @gmcdenali7178

    @gmcdenali7178

    7 жыл бұрын

    if doing those things makes it as reliable as other Detroit diesels they you'll get 1 million out of it.

  • @daltonshaw3317
    @daltonshaw33172 жыл бұрын

    Very informative videos ! I keep resorting to finding your page for good content on this motor. I also am cracking up laughing at your comedic take on the GM mistakes made here. Thanks

  • @kansascountry970
    @kansascountry9708 жыл бұрын

    Very good info! My truck is a 97 chevy but its the 5.7 vortec with only 102k miles and only gets about 14mpg. I knew diesels were more efficient but I had no idea it was that much better! Now you have me wondering about an engine swap but I cant justify that unless something bad happens to the 5.7. I may have to keep my eyes open for a possible future donor/towing rig. Thanks for the detailed video!

  • @gstubbz

    @gstubbz

    8 жыл бұрын

    +Off Grid Kansas I have a 98 k1500 ECSB with a 5.7 vortec and a 94 k1500 ECSB with the 6.5 TD, my vortec is actually the daily driver and gets 14mpg or so.

  • @kansascountry970

    @kansascountry970

    8 жыл бұрын

    Any particular reason you use the 5.7 as the daily driver if the 6.5 gets better mileage? Is the 6.5 geared lower?

  • @gstubbz

    @gstubbz

    8 жыл бұрын

    +Off Grid Kansas The 6.5 has 306k miles on it and my 5.7 has 195k. Diesel has 3.73s and the gasser with 3.42s, I just like the vortec more since it's a cleaner truck where everything works. The diesel is more of my hauling truck.

  • @andii1701
    @andii17018 жыл бұрын

    What content! I hope some engineer watches this and sees the demand for built to last, self maintainable vehicles and creates a company that makes them. I could work on my old '76 student car. But my current 2010 Toyota, zero chance. Thanks for sharing.

  • @Geordo1960

    @Geordo1960

    7 жыл бұрын

    Especially since many people buy these diesels for the longeveity of them only to be disappointed by expensive preventable break down. Not only GM but all the manufacturers have let down their customers when they have been expecting to get long lasting vehicles. It ridiculous that you have to do these mods to get a reliable engine when they shoul already come that way. However in defense of the manufacturers we do as a group in the United States put a lot of requirements and regulations upon our manufacturers that are almost impossible to meet.

  • @exoticcreature3059

    @exoticcreature3059

    7 жыл бұрын

    Why would the auto guys and galz build a reliable product? No high IQ required to know that reliability and profitability don't go hand in hand. GM, Dodge, and Ford know that their greed would be unaffordable to the public if their products lasted 1,000,000 trouble free miles. It's unaffordable because we live in America, land of the fee and home of the slave. Don't worry though. The big banks and auto dealers will take good care of us. When our vehicle's break down for good by the time we're done overpaying for them from our favorite dealership, which they are now designed to do, we can go to the banks and ask for another loan. Bank of America appreciates your business with them.

  • @gizmothewytchdoktor1049

    @gizmothewytchdoktor1049

    7 жыл бұрын

    enter the enterprising individual with a bit of wrenching skill and the aftermarket. ;-) i think the enthusiast that wrenches pisses both the manufacturers and banks off the most. that's why the lobby for the manufacturers tried to shut just about all of us down a year or so ago by trying to implement dmca rules in regards to engine management systems etc. didn't work though thankfully enough.

  • @exoticcreature3059

    @exoticcreature3059

    7 жыл бұрын

    I'm sure the reason for the success of the aftermarket companies is because of the money they have, just like OEM car companies who knowingly make cars and parts less reliable than the aftermarket who intends to offer actual bang for the buck with quality. Money buys everything in this world, even policy and credibility. This is no secret. Lobbying (which should be illegal) is what often keeps fat cats, well, fat and in business. It's why big oil companies successfully defeat any bill proposals to increase fuel economy and decrease oil usage. I do not defend or condone lobbying in the slightest. But as long as it's "legal" then the good guys of business have just as much a place in lobbying as the thieves that bought their way in.

  • @BeingMe23

    @BeingMe23

    6 жыл бұрын

    Engineers for for GM and most automotive brand are NOT ALLOWED to build a proper design. The sales and marketing and board Directors control engineering department..

  • @mattross5107
    @mattross51077 жыл бұрын

    Hey Yankee, love the truck vids and I'm a coffee customer as well. Really enjoy your offerings. Q: I have a 96 Chev Suburban with a 6.5 Turbo Diesel. I'd like to scrap my vacuum pump too. Can you recommend any YT vids that show the process, or have you made one in the past that you might have taken down? Thanks, love your stuff!

  • @xcelerator67
    @xcelerator674 жыл бұрын

    Great advice! Thanks for your help!

  • @forestdavegump
    @forestdavegump8 жыл бұрын

    Thanks for the reminder....john 16:33.Also thanks for your continued high quality videos.

  • @lakevacm
    @lakevacm7 жыл бұрын

    It's sad that they do this stuff on purpose to make extra money, engineering failure. We want our stuff to last or be durable, because we have that nature.

  • @catdieselpower193
    @catdieselpower1938 жыл бұрын

    dam fine vid ty pard!! I had a 94 6.5 heavy 3/4 ton truck and bam did you ever hit every dam nail on the head!! lol I had the prob with that dam fuel system overheating 2 times! but I sold the truck to my bud I worked with and he did all the changes you discussed here and bam that is one sweet running truck now! wish I had it back! great vid man!!

  • @Yankeeprepper

    @Yankeeprepper

    8 жыл бұрын

    Thanks for the comment, done right the 6.5 can run along time, run well and get way better mileage than anything else.

  • @kiffslandscapingfl7065
    @kiffslandscapingfl70658 жыл бұрын

    have you checked out the 3 inch plenum adapters at peninsular diesel they also have aftermarket intercoolers to for the 6.5 good upgrades

  • @harley96cube
    @harley96cube8 жыл бұрын

    Great...now you got me thinking I should be scanning CL for diesel truck/suburban with blown motor to put a fixed/reworked 6.5 in! :) Good stuff man!

  • @Yankeeprepper

    @Yankeeprepper

    8 жыл бұрын

    +harley96cube That's what I am doing! I will make it worse for you, look up "TED'S TRUCKS" in Alabama. He has low mileage and rebuilt military Hummer engines for 3K, I think he has some on EBAY too. The military Hummer engines are the "optimizer" 6.5's that have the beefed up blocks!

  • @harley96cube

    @harley96cube

    8 жыл бұрын

    +Yankee Prepper - Preparing for the Wrath of God and Fine Coffee. Yup, already started looking at the optimizer. Could put that in just about any Chev that a small/big block is in. Thanks buddy. :)

  • @winstonchenault159
    @winstonchenault1597 жыл бұрын

    Great video, very informative. I'm fixing to go work putting 6.5 L out of a '95 into my 2002 2500 HD that currently has a 6.0 L gas engine in it. Any suggestions other than the great info in this video? I'm not having much luck finding help making my current ECM work. Thanks.