Thanks for the video. I just bought a 99 WJ for a grand with 156k miles. My friends shop used it as a shuttle vehicle and they did a bunch of maintenance on it over the years. It's runs and drives great except for some worn trail arm bushings. Thanks for the reminder with the crank sensors. I had a TJ years ago that left me stranded in the mountains because of that sensor

@dylansgarage3549

8 сағат бұрын

@@BudzyFoxMX5 nice find and yea them crank sensors will get you lol good luck with it!! Thanks for watching

Dude, great video. I'm a very proud only of my used '01 Grand. I'm 68 and replaced /2.5 " lifted W/ Core4×4 adjustable control arms w/"boomerang spacer, extended sway bar links, Cooper AT3 all around. Did the math/measurements. NEVER had to get an alignment after 14,000 miles since I did the lift. Oh, of course adjustable tracbar, drag links & tie-rods. A perfect -2 degrees caster. No over/under steer. 1/4 " play driving. I should've been a factory engineer.

@dylansgarage3549

15 күн бұрын

@@garyd.7294 thanks man I appreciate you watching and as long as you dial them in they drive great your specs sound good to

Thanks Bud, but I'm an owner of a used '01 Grand 4.0. Doesn't burn a drop of oil, 175,000 miles. I put Freedom 2.5 " lift w/Ruff Country 1" leveling spacer up front. CORE 4×4 adjustable control arms/trac bar. Did the math & measurements. Minus 2 degrees negative caster. New drag links/ tie-rod ends. 1/4 inch play driving. Oh, of course CORE 4×4 spacer block for the rear boomerang. It's loaded. Heated leather, etc. 242 Select Trac. I had a 2000 4.0 QuadraTrac my son wrecked. I'm glad it's gone, the 242 hd is great. Thanks for the video without the electrical gremlin issues But that's only because our WJ's were way ahead of our times. I even have stereo volume/change control on the back of my steering wheel.

@dylansgarage3549

2 ай бұрын

They had so many options that were available in many other cars they even had auto wipers in the overland it’s crazy

Piston skirt issues are probably the most expensive problem these 4.0's. My 99 WJ Limited with only 130k miles had a piston skirt break. Still had full compression but made a loud ticking noise, I was just happy to find it wasn't rod knock or a wiped cam. My 4.7 Dakota has 250k miles on it, original engine and transmission, still runs and shifts like brand new.

Ty brother for this great video

You're an excellent mechanic replacing the crank sensor in a parking lot with snow on the ground!

@dogsarefun2

6 ай бұрын

Sensor went on me about 10 years ago on the hottest day of the year, had to get towed 25 miles with me and my doggie.

@dylansgarage3549

6 ай бұрын

@@dogsarefun2 thank you and the secret is the extensions over top of the trans to get it you get good at it when you done a couple of them but I’ve been mechanic for about 12 years thanks for supporting the channel!

For the fan control relay issue, convert to mechanical fan.

@dylansgarage3549

2 ай бұрын

Yes I have one but if you disconnect electrical one it will throw check engine light

@bitsquirrel140

2 ай бұрын

@@dylansgarage3549 I did the conversion on mine about a year ago and didn't get a code (2004 Laredo 4.0). I don't remember doing anything special when I did the conversion (fuses are all the same, didn't modify any OEM wiring, don't remember resetting the computer but could make a difference?, etc.) so not sure what the culprit would be in triggering your CE light. The plug that goes to the relay on mine sits disconnected to this day, with a bit of tape over it of course lol. I have to be honest though, the fan noise is obviously much louder, but overall I haven't had any other issues. The CE light coming on is curious 🤔

@dylansgarage3549

2 ай бұрын

@@bitsquirrel140 not to sure honestly I knew it threw a fan code high circuit when I unplugged it so I run both fans now mechanical and electrical makes ac ice cold lol

Thanks you for you video..!

@dylansgarage3549

5 ай бұрын

No problem thank you for watching!

Ive had 2 WJs over the years. The one i currently have has 3 of the 4 problems you talked about. No rust cause SoCal.

@dylansgarage3549

8 ай бұрын

No rust is a blessing I wish I didn’t liv somewhere with salt lol

@JasnoGT

8 ай бұрын

Same and No rust cause Texas! :)

@dylansgarage3549

8 ай бұрын

@@JasnoGT no rust would be nice I work on cars everyday at work and my life would be so easy to liv down south lol

Valve cover gasket, front timing chain cover, oil sensor unit, and on and on for leaks

@ayden8901

5 күн бұрын

My oil gage will drop to 0 and start beeping even though it feels fine when driving. I take it that is the sensor and my oil pressure is fine

@306-fromthestix

4 күн бұрын

@ayden8901 hard to say they have been known to fail, and then the engine if screwd. I overhead my 4.0 a few times,,,,, tough engines

Have water or fire extinguisher nearby if doing weld in rock sliders, wj s are full of foam insulation

@dylansgarage3549

3 ай бұрын

Yea I picked it all out of my driver side rocker that would be why they rot if it were my guess lol

I bought my beautiful 2004 4x4 Laredo in 2007. Still have it to this day and not looking to give up anytime soon. She only has 129K. But yes I was hoping you'd say the cam-shaft sensor! Happened to me a few months ago. Luckily, I was not on the hwy...which I hate driving on anyway.(Dallas lol). I was ready to trade it in. Luckily a good mechanic fixed it for me. Now I'm trying to find the knocking issue when I go over potholes. I already changed the ball joints, shocks and CV axles. I'll keep hunting. Maybe you've had something similar? BTW I'm about to buy those same headlight fixtures (Akkon). EDIT: I also fixed that bad wiring in the driver side boot myself! I saved hundreds. Only spent $5 on wire nuts. haha. Great video. Thanks!

@dylansgarage3549

8 ай бұрын

Thanks for the support man if the clunk is in rear it has to do with rear shocks bushings at frame they sell a kit to fix it aftermarket shocks seem to make noise on these all the time do you have the 4.0?

@JasnoGT

8 ай бұрын

@@dylansgarage3549 Oh no. The clunk is under the driver side floor board. You can clearly feel metal on metal. Parts to check on next would be: track bar, sway bar, drag link, maybe mounts? I'm not a mech so it's frustrating when my go to my mech who can't figure it out. It's only when I go over potholes or over any moderate rough terrain. I will check those back ones (which haven't give me any trouble) after I solve the front problem....Yes 4.0 I-6.....Thanks in advance if you have any ideas of what it could be! Subbed!

@dylansgarage3549

8 ай бұрын

@@JasnoGT I would think sway bar or sway bar end links hard to tell without hearing it or seeing it

Hello! Excellent video, I was curious what your rim and tire size is? Thanks!

@dylansgarage3549

7 ай бұрын

They are 18x12 -44 offset and 33x12.5 tires

good luck bro , from libya

@dylansgarage3549

9 ай бұрын

Thanks bro

Thinkin about pickin one of these up, im going from a 13 veloster turbo and im just concerned about the reliability on these things. Mainly with sensors

@dylansgarage3549

5 ай бұрын

4.0 if you want reliable I can guarantee you will not regret it I’ve seen some of them with 500k on original engine sensors arnt to bad of a concern if they go they are cheap and easy to change I’d look more at rust then anything cause they are old now

@cadencarrithers2339

5 ай бұрын

@@dylansgarage3549 the one im looking at has three rusty spots. The rockers, the gas tank skid plate, and the rear a arm kinda (its not super rusty but its getting there). Its also the 4.0 with selec trac

@dylansgarage3549

5 ай бұрын

@@cadencarrithers2339 rockers are normal mine has it also you got two options rock sliders weld in ones or replace rocker panels once you remove the foam Jeep thought was a good idea to put in there it won’t happen again a arm isn’t a big deal you can replace it or if lifting you will probably be replacing it anyways gas tank skid plate also can be replaced for couple hundred bucks I have to do mine also now the good is that’s most reliable engine and the best t case they came with I’d say go for it don’t sound bad at all

I have a 2000 Jeep Grand Cherokee 4.0 the only issue I'm having is the oil pressure. But I agree that the inline 6 is the best motor I wouldn't trade for anything

@dylansgarage3549

4 ай бұрын

Sending unit I went threw an issue with mine had to change sending unit and the pig tail harness to it ever since been perfect

@user-mz4el1sx7r

4 ай бұрын

@@dylansgarage3549 I've replaced it 2 and the same problem it doesn't start showing low oil pressure until it gets hot I have a video of me going down the road at 50 mi an hour and only showing 5 lb of oil pressure. When I stopped and I'm in park and I give it gas the oil pressure goes up but at cruising speed the oil pressure will slowly go down

@dylansgarage3549

4 ай бұрын

@@user-mz4el1sx7r put a mechanical gauge on it to see if it’s actually low

@user-mz4el1sx7r

4 ай бұрын

That's my next move I'm going to put a aftermarket gauge on it. Going run it inside so I can see if it drops or runs normal

@dylansgarage3549

4 ай бұрын

@@user-mz4el1sx7r I bet it’s a gauge problem o doubt it actually has low oil pressure

😂 there are more than five definitely I own five jeeps at the end I said ENOUGH!!!!!!!!

@dylansgarage3549

9 ай бұрын

Damn lol and one then that one needs a friend then they got lonely 😂

@TORO.008

9 ай бұрын

@@dylansgarage3549 1 wrangler 2 cherokee and 2 grand Cherokee 92 and 04 respectively.

Loving the comment on this video 😂😂

I have a 2000 wj it runs fine in the winter but cuts off in the warmer months and won't restart until it cools off. But during that time when you turn the key on the gauges don't move nothing. It'll crank but won't start. Anybody else have this problem and can offer a solution?

@dylansgarage3549

7 ай бұрын

Sounds kinda like a bad crank sensor I’d start there they are pretty cheap

That fan relay is there for a 4.7 I burt my fingers on it😂

@dylansgarage3549

8 ай бұрын

Good to know I wasn’t sure I’ve only owned 4.0

@dylansgarage3549

8 ай бұрын

Yea it gets very hot after been driving lol

Did you ever had a leak in the rear cargo compartment when it rains? I have a leak when my sunroof got clogged and i fixed it but now i have a leak on the rear cargo area i cant find where from

@dylansgarage3549

6 ай бұрын

I used to it was the grommet for wires for hatch

Great video but how do you have 32K likes and 2 K views?

@dylansgarage3549

8 ай бұрын

Thank you and I only have 84 likes not 32k

Shall we include heating/ac issues?😢

@dylansgarage3549

8 ай бұрын

I coulda made it so much longer lol

@Loli.slayer

7 ай бұрын

Fr my climate control panel went out in mine so the last owner cut up the harness and wired a light switch to the blower motor, which almost caught on fire since I’ve had it so I don’t have any heating/ac. It was 26 degrees this morning on my way to work sucks.😭😭

@dylansgarage3549

7 ай бұрын

@@Loli.slayer wow why would that do that!

@Loli.slayer

7 ай бұрын

@@dylansgarage3549 I don’t know😭, but once I get some money I’m going to pull a new one from the junkyard.

I have a feeling there are more issues on the way for this jeep. but for a good cause lmaoooooo

@dylansgarage3549

9 ай бұрын

Yea a lot more for my specifically 😂

@poca908able

9 ай бұрын

@@dylansgarage3549 😂😂😂

4.0 was Willies :)

@dylansgarage3549

8 ай бұрын

Yea the old school shit lol

@oldprophet

8 ай бұрын

@@dylansgarage3549 wasn't broken:)

@oldprophet

8 ай бұрын

@@dylansgarage3549 if it ain't broken:)

@dylansgarage3549

8 ай бұрын

@@oldprophet if it ain’t broke don’t fix it lol

@oldprophet

8 ай бұрын

@@dylansgarage3549 :)

I can think of more than 5 😂

@dylansgarage3549

9 ай бұрын

For real 😂

@306-fromthestix

9 ай бұрын

@dylansgarage3549 I had every issue you mentioned except for the coils, the perch and the window issue.

@dylansgarage3549

9 ай бұрын

@@306-fromthestix all common

You talk too much

@dylansgarage3549

6 ай бұрын

😂