How to fix Death Wobble
Products:
WJ Front Control Arm kit
www.core4x4.com/product/t3-j-...
WJ Front Track Bar
www.core4x4.com/product/t3-j-...
Torque Specs:
Upper Front Control Arm 55ft lbs
Lower Front Control Arm 125ft lbs
Jam Nuts Lower Front Control Arm 250ft lbs
Jam Nuts Upper Front Control Arm 200ft lbs
Track Bar Ends 65 ft lbs
Track bar Jam Nut 200 ft lbs
The notorious Death Wobble, what is it? What causes it? How to diagnose it? and of course, How to fix Death wobble?
We an answer all of these questions in this video, luckily we were able to fix this WJ's death wobble before it was dangerous. If you have questions or concerns comment down below! Thank you
Social Channels:
Instagram: / core4x4fab
TikTok: / core4x4
Facebook: / core4x4fab
Website: www.core4x4.com/
Пікірлер: 38
Bought my first set of control arm front and rear for my wj 4yrs ago, and Bought a set of control arms and a track back 3yrs ago for my mom's ram 1500. Love your products.
For me it was a mixture of out of balance tires/shocks, but also my front upper control arms on the axle side were completely obliterated, when I took them off the bushing just fell right out of the axle, BINGO!
Power tools and any kind of heavy suspension repair requires _eye protection_.
He will love it now .I just put your complete kit in my wife's 01 wj with 4inch lit and 33 tires .she said it drives and rides alote better for herq
Mines was the whole front end an alignment an tires
Could you tell me the size crows foot I need for the Jam Nut? (What size is the Jam Nut?) Is it SAE? Metric?? I've searched on your website and I can't find this information.
I have the cruise set on my wj and a 4 inch bilstien setup. As well as new tie rods. I still have dw around 60. What do I need to adjust my control arms to? Alignment is at 3.75 caster. Tires are 265/70/17 front. 275/7017 in the rear. Any idea what could be causing my dw? Thanks
How much does everything cost and mounted on this jeep
I need that on my 01....HELP!!!
Is caster a huge issue? I recently acquired a 04 wj and its got real bad death wobble at 40-50. Went to change ball joints and there 1.0 degree offset. Dont really wanna spend a bunch extra on a vehicle im not sure on the rest of its quality. Its only lifted maybe 2-3. Should i just adjust control arms for now
Bought the full control arm kit crawl series with the track bar and rear A arm for my 02 WJ can't wait to get them fully installed!
Great video, this was so helpful and made the job so much easier, combined the alignment video it was just what I needed. Death wobble gone, on my 2004 Jeep WJ 3" lift. Installed the Core 4X4 Tier 3 front upper and lower control arms and trackbar. AWESOME 😀, really great quality products and great support.
Using the fantastic Teckton tools from Grand Rapids MI I see! Love product you sell. I am with Trevor now on a new track bar setup with you guys.
Ive been chasing DW for 3 years on my wj. 1 1/2" bucket lift. The length of lower control arms and camper is only thing that throws me for a loop. When i ordered them new, they said its fine w/ stock controls arms, so i ordered stock length. Ive done everything you did in vid with a little more including polymer track bar, new tie rods on everything.
I will be ordering a set of front arms soon for my 2004. I have a set of rear lowers on but need to replace the fronts. Appreciate the great video
Awesome thanks
Do you have a link for the tool and size you are using to tighten the jam nuts at
I have a 4-in lift on my 2004 Jeep Grand Cherokee what control arm length in the front lower and upper would you suggest?
Is this kit available for WK/XK???
Was the length of the track bar changed?