Excellent video man, thanks for your help on the reassembly. Only the 2nd time I've ever attempted an automatic transmission. Mine work like a charm
@victorsamora68593 жыл бұрын
This video is a life save after reading the 4l60e bible 100 times them watching this makes perfect sense thank man god bless
@hondaman33966 жыл бұрын
I sat there fighting that band that goes around the deum for a hour and half. I watched your video and got it in in 30 seconds. Appriciate it man new subscriber
@robertrushton6622
6 жыл бұрын
thank you
@kennethbouch7796 Жыл бұрын
Has an ase master tech patch and puts in a snap ring with 2 screwdrivers instead of using snap ring pliers. That’s why I only work on my own stuff. I bet you never see Richard from precision transmission on here do something like that.
@robertrushton6622
Жыл бұрын
and what was the problem with the 2 screwdrivers most of the time I use snap ring pliers either way it gets the job done the transmission has not come back because of a snap ring failed I'm sure if you watch enough videos you will see it done many ways good luck working on your stuff your self I guess you tube made everyone a tech
@zrokayinenoumoumouni6515 жыл бұрын
I like the transmission gear a lot.Please can u list me one by one the name of the all plates.Thank u.
@mafosa95633 жыл бұрын
whats the output shaft end play specs? thanks for sharing! larry
@MrMatloo6 жыл бұрын
robert did you review the video before putting it up on you tube? can`t see most of the assemble of the servo.
@robertrushton6622
6 жыл бұрын
I will make another video on this servo today and put it on KZread by the weekend
@shawnhavey4862 Жыл бұрын
Would have been nice to know what tool you were using or is that a specialty tool rather than just putting it directly into the unit without showing the tool you were using or was it something that you prefab?
@shawnhavey4862
Жыл бұрын
On that of the spring cage clamp
@giovannilopez9427 Жыл бұрын
hey man wondering if you could help me out I have a 2011 Silverado with 4l60e I have first and second gear doesn’t catch 3rd or 4th. What could he the issues I was thinking about replacing the shift solenoids and the torque converter solenoid
@adrianherrera9688
Жыл бұрын
No way don’t waste ur time ur clutches are blown needs a rebuild
@1966badnova7 жыл бұрын
...did you review your video before you uploaded it?
@robertrushton6622
7 жыл бұрын
1966badnova I did watch it why do ask
@user-ot1kv6vt7c3 жыл бұрын
الترجمة العربية رهيبه 😂
@andrewrodriguez32926 жыл бұрын
Can you give a list of the tool list
@isacchris1
5 жыл бұрын
If you buy a transmission rebuild manual you can order the different tools! Mst of the tools can be made or improvised!
@LSX-zr8ng6 жыл бұрын
Realistically do you think someone that can build a motor and has built race motors can build a transmission? Because I have built quite a few motors and rear ends just never a transmission because I have heard horror stories lol.. from your video it doesnt seem too bad.
@robertrushton6622
5 жыл бұрын
yes you can build it just take your time
@LSX-zr8ng
5 жыл бұрын
@@robertrushton6622 Thank you I may have to give it a try! By the way this is a good video man!
@jonassal2676
5 жыл бұрын
Try a 48re first they are easy. I built it myself, never built a motor and I'm 23.
@robertrushton6622
5 жыл бұрын
Yes I do believe you can build a transmission just stay organized and clean like you were going to eat off it just take your time
@brandonmetcalf1141
5 жыл бұрын
you havent seen the worse of it im 16 and ive seen worse
Пікірлер: 26
Excellent video man, thanks for your help on the reassembly. Only the 2nd time I've ever attempted an automatic transmission. Mine work like a charm
This video is a life save after reading the 4l60e bible 100 times them watching this makes perfect sense thank man god bless
I sat there fighting that band that goes around the deum for a hour and half. I watched your video and got it in in 30 seconds. Appriciate it man new subscriber
@robertrushton6622
6 жыл бұрын
thank you
Has an ase master tech patch and puts in a snap ring with 2 screwdrivers instead of using snap ring pliers. That’s why I only work on my own stuff. I bet you never see Richard from precision transmission on here do something like that.
@robertrushton6622
Жыл бұрын
and what was the problem with the 2 screwdrivers most of the time I use snap ring pliers either way it gets the job done the transmission has not come back because of a snap ring failed I'm sure if you watch enough videos you will see it done many ways good luck working on your stuff your self I guess you tube made everyone a tech
I like the transmission gear a lot.Please can u list me one by one the name of the all plates.Thank u.
whats the output shaft end play specs? thanks for sharing! larry
robert did you review the video before putting it up on you tube? can`t see most of the assemble of the servo.
@robertrushton6622
6 жыл бұрын
I will make another video on this servo today and put it on KZread by the weekend
Would have been nice to know what tool you were using or is that a specialty tool rather than just putting it directly into the unit without showing the tool you were using or was it something that you prefab?
@shawnhavey4862
Жыл бұрын
On that of the spring cage clamp
hey man wondering if you could help me out I have a 2011 Silverado with 4l60e I have first and second gear doesn’t catch 3rd or 4th. What could he the issues I was thinking about replacing the shift solenoids and the torque converter solenoid
@adrianherrera9688
Жыл бұрын
No way don’t waste ur time ur clutches are blown needs a rebuild
...did you review your video before you uploaded it?
@robertrushton6622
7 жыл бұрын
1966badnova I did watch it why do ask
الترجمة العربية رهيبه 😂
Can you give a list of the tool list
@isacchris1
5 жыл бұрын
If you buy a transmission rebuild manual you can order the different tools! Mst of the tools can be made or improvised!
Realistically do you think someone that can build a motor and has built race motors can build a transmission? Because I have built quite a few motors and rear ends just never a transmission because I have heard horror stories lol.. from your video it doesnt seem too bad.
@robertrushton6622
5 жыл бұрын
yes you can build it just take your time
@LSX-zr8ng
5 жыл бұрын
@@robertrushton6622 Thank you I may have to give it a try! By the way this is a good video man!
@jonassal2676
5 жыл бұрын
Try a 48re first they are easy. I built it myself, never built a motor and I'm 23.
@robertrushton6622
5 жыл бұрын
Yes I do believe you can build a transmission just stay organized and clean like you were going to eat off it just take your time
@brandonmetcalf1141
5 жыл бұрын
you havent seen the worse of it im 16 and ive seen worse
Mirar