48v Razor MX350 -How I Installed The Motor/Controller/Battery/14t Sprocket Speed Runs w/ MPH @
Razor MX350 - How I installed everything! 14t Sprocket Installed. Speed Runs w/ MPH overlay @ 4:20.
For the Experts who have something to say on how I installed it? I’ll say this…… I was FULLY PREPARED to cut & weld this motor in place. But after trying this out for the past couple weeks, I’m satisfied it will stay in place. Especially with the other 2 bolts screwed down. The angle doesn’t bother me at all. It’s not gear to gear. It’s chain to sprocket. Saved a lot of hassle & time doing it like this. And honestly, just as clean in my opinion. I’ll get a 15t sprocket on at some point and get a video up on it.🍻
36v 800w Motor:
cart.electricscooterparts.com...
This is without the mounting bracket. I believe it’s sold out with bracket.
The 36v 750w:
cart.electricscooterparts.com...
is available with the bracket.
14t Motor Sprocket:
cart.electricscooterparts.com...
Fast Scooters 48v 1000w Controller/Throttle Kit:
www.ebay.com/itm/222627137326...
BTR Power 48v 15ah Lithium Ion Battery w/ Charger:
www.ebay.com/itm/125205213590...
#48v #MX350 #KruseNStuff
Пікірлер: 170
I used 1/2in spacers for my 2000w motor on my 60v build
@KruseNStuff
Жыл бұрын
Great idea. Someone had mentioned something similar. I’ll probably scoop some up and eventually do the same.👍💯🙏🍻
@KruseNStuff
Жыл бұрын
Just did the spacer deal on my sons RSF350. Much better chain wise. No more tilt. SOLID💪💯🙏🍻
@Uatfn
11 ай бұрын
@@KruseNStuffif I build this can I put the case back on or does the battery have to be exposed
very cool im about to do this same swap on my mx350 and was worried about cutting out room for the motor😂 thanks for this video it was extremely helpful i also am using vevor
@KruseNStuff
Ай бұрын
Nice🙏💯🍻
@eroc2689
27 күн бұрын
Doing the same exact build right now just waiting on my 48v lipo
That seems to be really fun to drive. Nice project! Subscribed!
@KruseNStuff
2 жыл бұрын
A Blast! APPRECIATE THAT💯🍻
Thick spacers for the low side of the motor and some small spacers for the high side could easily level it. Great build man looks like a good fun bike ☘️
@KruseNStuff
Жыл бұрын
Appreciate it Bro💯🙏🍻
And this is EVEN better, because while im modding we have a 2nd mx350 for his brother. But he is scared of it (only 5) , so one can be down while the other becomes Super Sayain :)
That's awesome brotha!!
@KruseNStuff
2 жыл бұрын
Thanks man. AWESOME Rig💯🍻
Very informative !
@KruseNStuff
2 жыл бұрын
Try to be.💯🍻
Just bought a razor mx350 and a hyper 350 for dirt cheap it's time to build some little cruisers for me and my son 🔥
@KruseNStuff
Жыл бұрын
Nice. Yeah you can do awesome things we these little rigs. Enjoy💯🙏🍻
@johnn3542
Жыл бұрын
You can add a extra 12v battery, connected by the motoer after the esc. I have one on a switch, so I have normal mode, and high speed, but switched on high you cruise on 12v with no throttle, then add your main power with throttle.
Good job! My baby the fixer lol
@KruseNStuff
2 жыл бұрын
lol.😘
what kind of range are you getting out this 15ah battery? awesome build bro 🤘🏼
@KruseNStuff
Жыл бұрын
Pretty descent range. Never did do an official range test with this setup. Definitely very reliable range & overall. Everything still SOLID. Motor, controller, battery.💯🙏🍻
Do you have drum brakes? If so have you upgraded them I did this same thing but with drill batteries and now I'm running into the issue of stopping fast enough lol
@KruseNStuff
Жыл бұрын
Yeah. Not yet no. I was thinking about buying an rsf350 rear wheel assembly for it. That comes with a rotor and a metal piece that goes on the rear axle and acts as a hook for the caliper mount. The only thing the mx350 would be missing is the metal nub that sticks out, that that hook then hooks on to. So if you can just mount some sort of rod or screw to act as that nub the rsf350 has, something that is solid and won’t move, you’re golden. I may try it at some point soon and show what I mean. Hope that made sense.🙏💯🍻
Awesome sharing 🤗 beautiful ❤️🥰😍 so lovely 🌹
@KruseNStuff
2 жыл бұрын
🙏💯🍻
I have built something similar, but for 36v, now it seems the motor gets hot and starts smoking. Does it need a heat sink? The kit was plug and play only upgrade needed was 36v battery. Motor is stock.
@KruseNStuff
Жыл бұрын
You need a new motor. 100%. You can fit as big as you want, if you install it like I did. I just did it to my sons rsf350 too. His has a big 36v 1000w motor in it. Video soon.🙏💯🍻
how diud you connect the battery to the controller did you have to buy a adapter?
@KruseNStuff
Жыл бұрын
There is a couple of things you can do. Cut the battery ends off of controller, strip the wire ends & either solder the connector that matches your battery’s connector to the controller ends you stripped. Or you can use the extra wire with connector that usually comes with your battery & solder the wires from that to the controller ends you stripped. Or if you don’t know how to solder and don’t have anyone to do it for you, you can use butt splices with heat sinks. Which is similar. Cut the battery ends off of controller, strip them & butt splice that end to the battery ends I mentioned before. Crimp it on both sides, then use a torch to heat sink it. Works just fine for these setups.💯🍻
How did you line with the new motor, to decide where to drill new holes?
@KruseNStuff
Жыл бұрын
I set the motor where I wanted it. I even set chain up to get it lined up as str8 as possible with rear sprocket. Then marked the holes with a marker. Then figured where the holes would be on the other side and drilled them.💯🙏🍻
How much did all the upgrades cost combined if you don’t mind me asking?
@KruseNStuff
Жыл бұрын
The OverVolt Kits are about $60. The motor was about $100. And the battery was about $200-$220.
Is that a stock chain and did you have to modify the sprocket?
@KruseNStuff
Жыл бұрын
This video is #25 chain, which is stock. But I believe I had to get a new chain and cut it to size. The sprocket in this video is stock also. 80t. No modifications.
what kind of connecters did u use to hook the battery to the controller im going to buy but idk what kind of connecter to get
@KruseNStuff
Жыл бұрын
We use btr Power batteries for these smaller builds. They come with a Male XT60, so your controller would need a Female XT60.💯🍻
@griffinmcguire2213
Жыл бұрын
@@KruseNStuff thanks your very helpful ill continue to watch the vids
How did you wire the batteries was there any soldering involved
@KruseNStuff
4 ай бұрын
Soldering is your best option. But if you don’t know how to, you can use butt slices or you can even use heat shrink tubing with solder in it. All will work. Soldering is always your best bet but the others work too. My problem with butt splicing is there is a chance it comes apart.💯🍻
How many miles did u get on a full battery highest mode
So the sprocket will get you to a higher speed...because I have everything you do expect the sprocket an mine goes slower than the stock motor 😢😢😢😢 i need help
@KruseNStuff
Ай бұрын
A bigger motor or drive sprocket will get you more top end speed, less torque. A bigger rear sprocket does the opposite. More torque, less top end. So a smaller motor sprocket, more torque, less top end.
Can u show or do a video exactly what u got and how u wierd everything ?
@KruseNStuff
2 жыл бұрын
What’s up man. Everything I put in is in the description. Very Simple. All plug and play except for the battery connection. If you plan on going to 48v from 24v and want to run 4 lead acid batteries. You’d need 2 more. You can get the 48v kit with battery harness already ready, making it full plug and play. Or if you want to run a Lipo, you would have to solder the right connector on the controller to match the battery of your choice. The motor is also plug and play.
@SuperSickNerd
Жыл бұрын
Can you make a video on how you wired the battery ? Otherwise I’m sure I’ll figure it out.
How did you wire the battery to the controller? what about the on/off switch?
@KruseNStuff
2 жыл бұрын
The on off switch will not be needed anymore. It will turn on/off by key only.
@jerm-kim
Жыл бұрын
@@KruseNStuffhow did you wire the key ignition? my throttle works but the volt meter doesn’t turn on. the bike also runs when the key is not in. where should i wire the blue and yellow wires?
@KruseNStuff
Жыл бұрын
@@jerm-kimthat sounds funky. the throttle plugs into the 5 pin connector. Plug n play. The blue and yellow is your motor wire. The biggest red and black is your positive/negative battery wires. Something doesn’t sound right, if your rig is running without the key in it.
Hey how much did you spend all together on upgrades? Just wondering
@KruseNStuff
2 жыл бұрын
$115 for the MY1020 36v 800w motor, $60 for the 48v 1000w Fast Scooters Controller & Throttle/Grips, $209 for the 48v 15ah BTR Power Lithium Battery.
@drew.p.weiner
2 жыл бұрын
Thank you. I've been watching ton of videos on doing this. I like yours the most by far. Good work 👍🏻
@KruseNStuff
2 жыл бұрын
@@drew.p.weiner Thanks Drew🙏💯🍻
@KruseN stuff does your motor over heat at all?
@KruseNStuff
Ай бұрын
@@devonanagli858 it can with overvolting. And long rides and off road. If you want to avoid that altogether, don’t OverVolt. You can use a 48v motor, 48v 1000w controller and 48v battery. You can gear her up high and be good. But the higher you go, the less torque you get.💯🍻
Hey bro so as far as connections harnesses what do I buy
@KruseNStuff
Жыл бұрын
What’s up man. What are you trying to do?
does it have enough power to wheelie?
@KruseNStuff
Жыл бұрын
No. Even the Electro & co. Kits on 48v don’t power wheelie. That’s at 3500watts. So 1000watt definitely won’t. More of a cruiser for kids. Performs but doesn’t wheelie. You feel the torque though, if you are geared down.💯🙏🍻
Yo bro any chance you can help me I got an mx350 put a 48v 1000w and it’s not going faster then 17mph and I’ve asked and it’s sps to to do 20-30 so?
@KruseNStuff
Жыл бұрын
What all did you put in?
@jacobpando8881
Жыл бұрын
@@KruseNStuff 48v 1000w 10ah battery
@KruseNStuff
Жыл бұрын
@@jacobpando8881 what controller did you put in?
Can it still work if I just use the throttle kit and just install that?
@KruseNStuff
Жыл бұрын
No. You’d need to upgrade the throttle, controller & battery. And in the case of this video, the motor too. But if you just want to OverVolt your stock motor. You’ll need a throttle, controller & either an extra lead acid battery or a lithium battery, which I suggest the latter.
@SuperSickNerd
Жыл бұрын
O is this why my throttle isn’t working ?
Is that motor from a mx650? And the controller for a 650?
@KruseNStuff
Жыл бұрын
No. In this video, it is a 36v 800w motor with a motor mount welded to the motor. It can be used in an mx650 or RSF650 but the mount would have to be shaved down a bit. And once done, wouldn’t be able to go back in bc of mount being shaved down. The controller is an aftermarket controller from fast scooters. But yes works with them all.💯🙏🍻
what longer screws to order for stock motor holes on amazon?
@KruseNStuff
3 ай бұрын
I’d use 3/8”, about 1 1/2” to 1 3/4” long. You can get them with the washers and nuts also.
@KruseNStuff
3 ай бұрын
a.co/d/hduzJvm they have a 2” long option also. Just look below.
do you know any good 48v kits off of amazon?
@KruseNStuff
Жыл бұрын
No, the fast scooters kits are reliable. So never had to go looking for another. And we have been slowly switching to the 72v Electro & Company kits. They can be run on 48v also. Which is nice.💯🙏🍻
How long can you ride with that setup?
@KruseNStuff
Жыл бұрын
Very descent ride time. I don’t have an exact mileage for you but it’s night and day better than stock lead acid batteries. 15-20 miles something like that. Not a slouch.💯🙏🍻
If you dont mind me asking about how much donyou weigh?
@KruseNStuff
8 ай бұрын
I’m 5’11”, About 165 lbs.
What is the range? Or how long it last?
@KruseNStuff
Жыл бұрын
WAY LONGER than stock. Don’t have an exact but WELL Worth it💯🍻
How long does this last?
@KruseNStuff
2 жыл бұрын
Meaning the battery? The battery last a pretty long time. We don’t kill it in a day. If you mean the motor and how it is installed. Been lasting just fine. Going STRONG 💪. We love it and highly suggest doing it. And since I fit this motor in like this. It means you can go even bigger if we want😁 But I’m keeping at 48v for awhile. The mx650 will be a 72v 5000w monster soon.💯🍻
good job Bro ! but you can ride in the grass
👍👍👍
@KruseNStuff
2 жыл бұрын
🙏💯🍻
How do you get that speedo on the screen
@KruseNStuff
Жыл бұрын
Thru the GoPro Quick app. First, Make sure your GoPro is set ON wireless connections. By swiping down on your GoPro, swiping right, click on connections. Then wireless connections, select ON. Then your good. Record. Upload the footage to GoPro app. Then once your footage is uploaded to your GoPro app. Go to your media, select the video you want to put it on. Tap the pencil at the bottom left of screen. Scroll ALL the way over to the very last icon on the right. Called Stickers. Click it. Click on the 2nd icon from the left speedometer. Click once, it puts it on the top left. Click again it goes on the right. Again bottom right and so on. Hope that made sense and helps.💯🍻
@bikelifegee
Жыл бұрын
@KruseN Stuff got it thank you so much
@KruseNStuff
Жыл бұрын
NO PROBLEM BRO💯🍻
Can you post what I have to buy in one vid plz
@KruseNStuff
Жыл бұрын
If you want to OverVolt a 36v motor or you want this exact setup. The links are in description. You just need to order the kit a matching battery & a 36v motor, that’s it. If you tell me exactly what you want to do, I’ll send you each link right here in the comments.
how long does the battery last
@KruseNStuff
Жыл бұрын
Very descent. A charge gets my son through a day and sometimes longer depending on the riding he did.💯🍻
Do you know why my “fast scooter” doesn’t work ? Throttle it’s all hooked up , turn the key it lights up but doesn’t work.
@SuperSickNerd
Жыл бұрын
Can you link me to a different battery ? The one is out of stock you’re using!
@KruseNStuff
Жыл бұрын
Try disconnecting the throttle and make sure the pins are all straight. Sometimes they can bend, not making a connection.
@KruseNStuff
Жыл бұрын
The 48v 15ah is sold out everywhere I know of. Here is a link to a 48v 10ah BTR Power battery. Cheaper. www.ebay.com/itm/403810929420?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=HlrAx1kQR1y&sssrc=2349624&ssuid=axtom1U_SJq&var=673705759196&widget_ver=artemis&media=COPY
@SuperSickNerd
Жыл бұрын
Thank you!! For the link 👍.
@SuperSickNerd
Жыл бұрын
Wait do I gotta upgrade the battery for the new throttle mod? All the pins everything looks good.
Found it :)
@angelmtz8568
Жыл бұрын
Where?
@ArmoredBullTrading
Жыл бұрын
@@angelmtz8568 his other vids. Go to his channel. You will see it.
Yo where did you get the thing to mount the motor in?
@KruseNStuff
3 ай бұрын
That motor comes with the mount welded on. You can get 1/2” to 5/8” spacers to clear the frame. If you need a link to the motor and or spacers, let me know.💯🍻
@absolute.cr7
3 ай бұрын
@@KruseNStuff ya because I have a 36v motor just without the mount and I need one
is this website safe to buy the motor
@KruseNStuff
Жыл бұрын
Yeah. Electric scooter parts is legit.💯🙏🍻
Get you a minibike I bought one for 150 on marketplace put a $300 race motor in it and it does 56 mph and I’m 210 pounds
@KruseNStuff
2 жыл бұрын
This is my sons. Loving what I got.🔥🔥Send me your motor info. Definitely interested in what you’re working with.💯🙏🍻kzread.info/dash/bejne/ipOdxNeIfM-bpbA.html
Wow wasnt expecting the link to show me a 900$ battet :*(
@KruseNStuff
Жыл бұрын
The link is old. Just type in 48v 15ah BTR Power. The 72v comes up on that old link now for some reason. Appreciate it man💯🙏🍻
@ArmoredBullTrading
Жыл бұрын
@@KruseNStuff would the 14t or 15t do anything for the oem mx350 setup? Just curious
@KruseNStuff
Жыл бұрын
@@ArmoredBullTrading Yes. More top end. Less bottom end torque. Higher temps. But those stock sprockets are a pain to get off if I remember.💯🍻
@ArmoredBullTrading
Жыл бұрын
@@KruseNStuff ordered a 15T sprocket just now, will come back after resultts :)
Mx650 motor ?
@KruseNStuff
5 ай бұрын
It’s a little bigger and with a motor mount bracket. It’s a 36v 800w motor.💯🍻
Is the motor 48v
@KruseNStuff
Жыл бұрын
This is a 36v 800w motor overvolted to 48v w/ a 48v 1000w controller/twist throttle/48v battery.💯🙏🍻
What T is the rear sprocket
@KruseNStuff
Жыл бұрын
This video was just the stock #25 80t rear sprocket💯🍻
@PeytonCopeland-sb7bt
Жыл бұрын
@@KruseNStuff was it the stock chain?
@KruseNStuff
Жыл бұрын
@@PeytonCopeland-sb7bt yes.
How much does it cost?
@KruseNStuff
Жыл бұрын
What’s up man. I listed everything in the description. About $270.🍻
@4strokefrosty
Жыл бұрын
@@KruseNStuff Ight ty
How tall are you
@KruseNStuff
2 жыл бұрын
About 6’
Hi I’m not understanding does the battery make the bike faster or the motor
@KruseNStuff
2 жыл бұрын
Both do. As does the controller. But you don’t have to change your motor. You can OverVolt your stock 24v motor. Just need an upgraded controller/throttle and either an extra 12v battery or a 36v Lipo. In this video, I changed the motor to a 36v motor so I overvolted it to 48v. Controller/throttle and battery. What are you trying to do? That would be a good place to start.
@KruseNStuff
2 жыл бұрын
Here is what I did for stock 24v originally. Still have it in an RSF350 now. 36v OverVolt kt kzread.info/dash/bejne/pJ17rZmsfNyahKQ.html
@ElijahMullins54
2 жыл бұрын
Would it work if I kept the motor stocked and just get a 48 V battery how fast would I get in that because my goal is to go fast also you have to add a new throttle?
@ElijahMullins54
2 жыл бұрын
@@KruseNStuff could u also send me a link on Amazon to new throttles and a battery 48V?
@ElijahMullins54
2 жыл бұрын
@@KruseNStuff weird question but is everything you plug in or do u have to soldered with heat is their also a tutorial or manual to how to setup the throttle
Mines gonna be 72 volt
@KruseNStuff
Жыл бұрын
Nice. Just keep in mind with higher speeds, you will need to slow down quicker. The drum brakes aren’t enough. Plus no suspension. Get you an mx650 to put it in when you’re done. You won’t be disappointed. I was going to make it 72v also but decided to go all out on a more comfortable option.💯🙏🍻