Those are a couple of nice banshees! Amazing how clean they both look - must be nice to work on them when they are in that kind of shape. Very much looking forward to the RZ content - that looks like it could come up nice too.
@herrjugsracing7816
3 жыл бұрын
Thanks 👍
@AlKoholic1972 Жыл бұрын
Just stumbled across your channel, and I love the knowledge you have and share with these motors. I've never tore a banshee down, but after watching yor videos, I feel confident I could rebuild one blindfolded-not that I'll ever have the opportunity. I still don't understand the cub, or 4 mill terms in the engine builds, but I'm learning. I'm absolutely in love with that rz350. I've only seen one in real life, and the owner was generous enough to let me ride it, of course he was on my zx-7r right behind me. I'd give my left nut to own one of them gems
@herrjugsracing7816
Жыл бұрын
Buy one, they are fun. Not as nice as the new stuff but old stuff is unique and gets lots of attention.
@joshbeck2893 жыл бұрын
Keep em coming bro love watching you build banshees and teaching us
@herrjugsracing7816
3 жыл бұрын
Will do
@dennisbrooks1863 жыл бұрын
Love all your builds man! I'm building a 4mil stock cylinder flip bike myself. I've gear a ton about u but haven't needed extensive work yet. But on this build I will most likely be sending you the stock cylinders, they deff need all the work done to make it work with 4mil crank. But deff want to see more on any banshee builds and that rz!!!
@herrjugsracing7816
3 жыл бұрын
Sounds great!
@ElFather0243 жыл бұрын
I learned a lot with your content, thank you
@herrjugsracing7816
3 жыл бұрын
Glad to hear it!
@jimnm223 жыл бұрын
Great content! Keep posting more!👍
@herrjugsracing7816
3 жыл бұрын
More to come!
@Dave-lt8nq Жыл бұрын
It looks like you only put a layer of sealant on bottom 1/2 of case and none around seals. Are those extra steps a waste of time? Love the videos by the way.
@herrjugsracing7816
Жыл бұрын
I don't do the seals but it doesn't hurt to go over them.
@hhstarwars Жыл бұрын
Did you do the Jango fett scheme on purpose?
@Mohammedbanshee3503 жыл бұрын
👍👍👍👍💯💯
@mike0chek2 жыл бұрын
i couldnt help but notice a washer going on before the flywheel nut. just wondering the reason for that? thanks!
@herrjugsracing7816
2 жыл бұрын
The stock setup comes with no washer. You don't need to run one.
@FMSax2 жыл бұрын
I was told that Banshee's don't come with a radiator fan. If this is true, is one needed?
@herrjugsracing7816
2 жыл бұрын
No fan, just keep it moving through the air. I never have run a fan.
@hubertberkel45542 жыл бұрын
What's a good set of inframe pipes for a 472 super cub ?
@herrjugsracing7816
2 жыл бұрын
Shearer, CPI, Sniper, RDZ all small bore in fames will work well.
@WEBO_3052 жыл бұрын
I need some help
@robertwilson72162 жыл бұрын
What's the brand name of those polished lights on the banshee. I bought a banshee with those on it but no brand name. One has a Crack in the lense I would like to replace the light. Thank you
@robertwilson7216
2 жыл бұрын
Oh yeah meant to ask how much to build my banshee? I like to trail ride but have alot of open spaces to ride say a 421 or bigger?
@herrjugsracing7816
2 жыл бұрын
I don't know the brand of lights. A 421 is a good all around motor and the best bang for the buck in my opinion.
@julianmercado83542 жыл бұрын
Is the 472 racing fluid
@herrjugsracing7816
2 жыл бұрын
Race gas, yes.
@theawb69863 жыл бұрын
i litterally pulled my tz bearing out in pieces recently. highly advise not using them. look on bansheehq for pics and info
Пікірлер: 30
Those are a couple of nice banshees! Amazing how clean they both look - must be nice to work on them when they are in that kind of shape. Very much looking forward to the RZ content - that looks like it could come up nice too.
@herrjugsracing7816
3 жыл бұрын
Thanks 👍
Just stumbled across your channel, and I love the knowledge you have and share with these motors. I've never tore a banshee down, but after watching yor videos, I feel confident I could rebuild one blindfolded-not that I'll ever have the opportunity. I still don't understand the cub, or 4 mill terms in the engine builds, but I'm learning. I'm absolutely in love with that rz350. I've only seen one in real life, and the owner was generous enough to let me ride it, of course he was on my zx-7r right behind me. I'd give my left nut to own one of them gems
@herrjugsracing7816
Жыл бұрын
Buy one, they are fun. Not as nice as the new stuff but old stuff is unique and gets lots of attention.
Keep em coming bro love watching you build banshees and teaching us
@herrjugsracing7816
3 жыл бұрын
Will do
Love all your builds man! I'm building a 4mil stock cylinder flip bike myself. I've gear a ton about u but haven't needed extensive work yet. But on this build I will most likely be sending you the stock cylinders, they deff need all the work done to make it work with 4mil crank. But deff want to see more on any banshee builds and that rz!!!
@herrjugsracing7816
3 жыл бұрын
Sounds great!
I learned a lot with your content, thank you
@herrjugsracing7816
3 жыл бұрын
Glad to hear it!
Great content! Keep posting more!👍
@herrjugsracing7816
3 жыл бұрын
More to come!
It looks like you only put a layer of sealant on bottom 1/2 of case and none around seals. Are those extra steps a waste of time? Love the videos by the way.
@herrjugsracing7816
Жыл бұрын
I don't do the seals but it doesn't hurt to go over them.
Did you do the Jango fett scheme on purpose?
👍👍👍👍💯💯
i couldnt help but notice a washer going on before the flywheel nut. just wondering the reason for that? thanks!
@herrjugsracing7816
2 жыл бұрын
The stock setup comes with no washer. You don't need to run one.
I was told that Banshee's don't come with a radiator fan. If this is true, is one needed?
@herrjugsracing7816
2 жыл бұрын
No fan, just keep it moving through the air. I never have run a fan.
What's a good set of inframe pipes for a 472 super cub ?
@herrjugsracing7816
2 жыл бұрын
Shearer, CPI, Sniper, RDZ all small bore in fames will work well.
I need some help
What's the brand name of those polished lights on the banshee. I bought a banshee with those on it but no brand name. One has a Crack in the lense I would like to replace the light. Thank you
@robertwilson7216
2 жыл бұрын
Oh yeah meant to ask how much to build my banshee? I like to trail ride but have alot of open spaces to ride say a 421 or bigger?
@herrjugsracing7816
2 жыл бұрын
I don't know the brand of lights. A 421 is a good all around motor and the best bang for the buck in my opinion.
Is the 472 racing fluid
@herrjugsracing7816
2 жыл бұрын
Race gas, yes.
i litterally pulled my tz bearing out in pieces recently. highly advise not using them. look on bansheehq for pics and info
@herrjugsracing7816
3 жыл бұрын
Thanks for sharing