I bet your Dad is very happy to see that old girl running again! Finally got to drive my brother past your farm last weekend.I would love to stop by someday and say hello! I was introduced to the Flemington department store near bye. Thanks for all the 4010 videos!!! A job well done guys!

Back in 1963 just 9 years old that was the tractor I plowed with..it was the beginning of a lot of hrs behind the steering wheel...simple and trouble free

Isn't it sad that we have to think about the thieves who would rob when they know we are not home. 4010 is off to a great start, there are always little things to be finished. 🙂🙂

Tim...Please wear a belt!!! Your not a plumber!😂

that 4010 sure sounds good ,, keep up the great work Wes ,,i always love seeing an old tractor come back to life I'm looking forward to the 4960 video

It is so nice to see the 4010 move under its own power. When you get done with it that will be a nice addition to you tractor collection.. great video Wes, thanks for letting us ride along as you do this stuff!!!!

Saw a sign you might like "Trespassers will be shot. Survivors will be shot again."

@ih1206

6 жыл бұрын

Mike Gray-Ehnert there's one of those signs at our local tractor junk yard and many a time has old Jim had break out the shotgun.

@dannythomas5902

6 жыл бұрын

Well buy it and send it to Wes he will Like It

Wes, she sounds really smooth! Great job on the rebuild and thanks for keeping us updated on the kwirks!

Have a good time on vacation! Thanks for recording the 4010 going back together. It's been fun to watch.

Nicely done Wes!! Never doubted you for a second.

Top job on a beautiful tractor

I love it Wes. I was waiting on you to say those exact words. Hope no one is stupid enough to do smthg stupid. Wish you and the better half a safe journey

Great video Wes thanks for sharing have a great vacation when you go

I enjoy this series so much !!

@polarViking

6 жыл бұрын

Randy Rhodes yes, i think so too! Interesting, fun and educating. Wes should do more series like this, maybe not overhauls but repairs like the 4960 and stuff like that. I really like how he goes in depth explaining how and why.

ATTA BOYS GREAT JOB.

Love these videos keep them coming

lot of restorations. it's a beautiful tractor. thanks for sharing.

So excited for more 4960 videos. I love that tractor and I can't wait to see it get back to the field

great job wes and tim thanks for the video

On a lot of restorations it's the little things that really start to add up costing you, in some cases the engine overhaul is the least costly

Hey Wes, I've really enjoined watching your 4010 rebuild. It was great to see it move under its own steam. It's a shame you have to respond to idiots about protecting your property, I'm sure they'll think twice if there's a gun the other side of the door!!! Thanks so much for your great channel and hope you enjoy your well earned holiday.

Wes, sad to say that there are weird people out there! Enjoy the trip! I'm looking forward to seeing what you see over in Japan. I saw the bomber that dropped one of the bombs at the Smithsonian in VA.

The motor sounds good. Must have been a top notch engine specialist that rebuilt it. GOOD JOB WES!

Great job guys! The 4010 sounds good!

Nice job Wes didnt doubt you and Tim would get that rolling again

The tractor sounds great!!! The tireject vs buckshot was epic

Man, can I understand the cash flow issue! You're not alone! Great headway so far, its been fun watching

Great job Wes! How much fun would a rebuild be if you didn't have a few surprises when you think you're done. Keep up the great work!

Hi Wes, I hope you have a great time on vacation and hopefully nothing happens while your away. Know body should have to worry about there property while they are away ever! I think people are jealous of other, because they can not afford to do what you or others do, so they try to bring you do to there level. Sorry to say they get caught and go to jail, while you have to fix or replace what they stole. Very sad for everyone, because no one wins ever and it takes time to rebuild what is lost.

Very nice! Great job and congratulations

Can't wait to see the 4960 up an running again an a big smile on tims face 👍👍👍

Good job Wes

No competition, Wes. You always prove the trolls wrong. Two thumbs up!

Dear Wes, have a great time in Japan... the peace museum is....... tastefully done. It's a somber trip away from there! Come and buy a farm in New Zealand... leave ya keys in the car at night and I don't even know where to find a house and yard key, Really enjoy following your day to day life. Regards Kiwi Phil

Great job Wes and tim

Excellent

Tractor sounds great. Ready for another 50 years.

Hay Wes the 4010 sounds good you did a great job on it

Nice job

Can't wait to see it painted. Theirs something about a nice painted tractor that gives me the fizz. I think tractors like the 4010 that are old and rusty just don't look good. It may run flawless but if it's an eyesore it just turns me off. The 4010 will look awesome once it looks new with the paint job.

Sounds great👍🇺🇸

That motor sounds good... nice work.

looking goooood

@jackbauer6041

6 жыл бұрын

Michael Mølgaar

4010 is the sentimental project when the time is available. Tim needs his 4960 back before he starts to get the shakes right Tim! Still considering loader for the 8120 or a stack wagon for this year? Enjoy your trip and time off, not to much to ask for when someone is used to working seven Days a Week. Life is to short not to take some time to enjoy it!

What a world we live in when one has to promise to use any means to defend one's rights of privacy. Nicely done on the rebuild and Good Travels.

The 4010 is definitely a labor of love.

Very nice again Wes 4010 engine running very smooth Wes 🚜🚜🚜🚜🚜🚜😲💥😲💥😲💥😲💥😲💥

Enjoyed the 4010 vids

have fun on your trip Wes :)

Very cool!

Hi Wes have you tried any wreckers up here in Canada, the $ exchange may help you save some money on those parts. I rebuilt one of those steering units years ago on a tractor that had a dash fire. you need a good long clean bench, lay it out as it comes apart, nobody messing with it while you do it muddling parts up. Then an afternoon free to just do that with no other interruptions. I'd never seen one before and did it no problem with a JD manual my boss borrowed from the dealers. I figured it was going to be a night mare when I got the book and started tearing it down, there was shit 5ft long spaced down the bench on shop towel. Wes the nice guy on here can be an @$$hole here to if he wants to be L.O.L. Did you buy that ring for valentines, that you should of brought ages ago ? If you didn't maybe costco has some good deals like hearing aids L.O.L Enjoy the trip and take care.

Very Cool.

Did not realize you were having so much trouble with people coming on your property for no good. Hope you have a great vacation and keep the vids coming.

Wes! Tractor could be smoking from your injectors. Those injectors were notorious for smoking and they are way obsolete. I would recheck your timing, making sure it's supposed to be on TDC. Then I would retime it 4 degrees before TDC. It will help with the slack in your gear train and will clean up the smoke. Just time the IP in direction of rotation so there is no slack. Congrats on getting it going!

Well done on the movement

Sounds great

the old tractor sounds great!

Jeebus!!! the Tim Andres Fault was acting up in this video....

SWEET!!!!

Love your warning hoss we have that same thing in the mid-west we have big guns too I got my Smith and Wesson 500 magnum

Wes, I have really enjoyed watching you rebuild this guy. Kudos. I do have one question, and please forgive my ignorance. Below the exhaust manifold, is that green part the intake manifold? I noticed a couple of clamps on the end of it. If so, what kind of air filter will you be putting on it, and does it hurt to leave it open like that? Thanks again for all the time you spend on these videos. Take care.

This is sad that you have to worry about thieves when going on vacation. Great video as usual.

Have a great trip ! Really enjoyed the tractor rebuild! I have done five v8 motors and many small motors much the same way you did! Saw nothing you did was wrong so egnore the trolls ! Your a great guy Wess.

sounds awesome

Well said

That looked like a fun project

Great video. Don't tell anyone about your vacation. Make extra vids. Have them down loaded when your gone and the weirdos will think your still home. Enjoy your time off and be careful!!

Is it a good time to put tire ject or however it's spelled in a tire that is not flat such as forage box tires that are on the road? Is it a proactive product? .

@wiserguyer

6 жыл бұрын

Here you go click ,this active link and they will answer your questions . www.tireject.com/products/tire-sealant-kits-fix-flat-tires

Its alive.........good job

There is a place called Martin tractors in Lancaster PA outside of Quarryville. They do everything old John Deere and have lots of nos and used parts.

@treebutcher4142

6 жыл бұрын

Found a 4010 parts tractor with a bad crank on craigslist near Newark Delaware if your interested

Have a great trip!

Olf your lucky and have worked hard, enjoy your holiday, ps come to Australia 🇦🇺

Are you going to "seat the rings"? After running it awhile I would pull it and load the engine to seat the rings. Of course I am sure you already know this. Great rebuild and thoroughly enjoy your vacation.

Looking good

Nice work bro

Just sad that you even have to put this message out there. Really enjoying the progress on the 4010, glad to hear it run and see it move! Looking forward to the 4960 being worked on again!

When you do the steering column on the 4010 I would love to see that. I need to do the exact same thing to the 4010 I have

Not wanting to know how your stuff is set up for your privacy but I have a few questions about the cameras. This would be for my farm. How much does a system cost and how do they work do they just clear themselves off every week or what?? Again not wanting you to show your set up but just wondering

Money doesn't flow out of my ass either. My tractor rebuilds are also on hold for now.

Hi Wes I was looking at some of your old video of the 4320 I'm about to buy one and was wondering what the good and bad of those tractor were

What ever happened to this thing. Can u make some videos of the older tractors and stuff. I always enjoyed the 4320 4430 5020 this tractor and the old 2 cylinder videos. Let’s see some updates or videos of them working.

@drewbayless9069

3 жыл бұрын

That’s what I was wondering what happened to it ??

Great Job on the 4010 But a decent yard brush to brush out the front of the shed wouldn't go a miss . Ha ha

Have you considered using AT-205 Reseal to help stop the leaks? We've tried it and it works great.

Hey,.....I wonder if I could get one of those toques you are wearing. I live in western Canada.

Good for you

Is there a trade type school around there that would want to sand blast/paint the tractor for a project?

Amen Wes

It’s a sad thing that you even have to think about people coming to your home and farm while you are on vacation and vandalizing what you worked so hard for your entire life. Hopefully that doesn’t happen. Have a good vacation

It would be great if you could explain what the numbers stand for on the tractors .

Great project keep up the great content, Did the tractor have rear fenders?

@Mad_Farmer912

6 жыл бұрын

Regal Bowman not sure if it did but he has gotten a set to put on it

@regalbowman3143

6 жыл бұрын

Thanx for the reply

@derekthorne3915

6 жыл бұрын

Regal Bowman it had a set on it when he drug it out last year

Hey Wes question for you. I have a John Deere 4620 and when you use the hydraulic outlets it jerks and will blow the couplers out it’s full of oil was wondering if you had any idea on what could be going on.

@wiserguyer

6 жыл бұрын

I seen the male coupler check valve not open when connected to the female coupler , it uses a male dimple that push's the check valve open when inserted into the female coupler and It seems the male coupler dimple was worn down and wasn't allowing the check valve to open and not allowing hydraulic oil to flow .

Enjoy your Vacation, Nobody has the right to violate your property, No if's and or but's,,,,,

@cmusic52

6 жыл бұрын

Randy Rhodes sadly I don't think hardly any farmer can go on vacation without having to have someone look after the farm nowadays

@MultiPowerlin

6 жыл бұрын

Chris Rowlison at our farm we have 1500 gallon diesel tank that's for off road use and after a couple of days we noticed that the gauge was moving sure enough we dipped the tank of who we thought was stealing our diesel, sure enough red dyed diesel

@Mad_Farmer912

6 жыл бұрын

Minnesota outdoors isn't it like a $10000 fine running off road in a highway vehicle. I'd report them so they'd get fined

@MultiPowerlin

6 жыл бұрын

The Ghost Of Lucias Clay we brought it to court he was fined then on top of that had 1 year in jail

Great to see the 4010 move under its own power. So sad that society has gotten to the point that you have to tell people to leave your stuff alone because you have said you are going away for a few days. Perhaps you should not have told them Tim lives there and just left it for him to put 2 between the eyes after they entered. My 2 favorite shot placement locations. 1 between the eyes 2 inside of upper thigh 3-4” below crotch.

hi wesley good job 8/10 bob in the uk

Wes telling it mostly proper at end of video. far more lenient than I am// discharge first ask questions later! PLEASE folks, comment/ and get 100% email and then phone agreement to show up there! and don't be late or be in phone contact ... same goes for ALL youtube channels!

Well done Wes you have got got boss end of that tractor there are loosers every were that would rather nick our stuff than get a job and help society

Your dad will love it when you get it looking good it will be a nice little hay rake tractor or the square baler tractor Tim Is is like a kid in candy store to have 4960 go again boy he loves that tractor

why did youtube take the otger live stream down i only herd the first 30 mins. so i neednto see thw last few minutes any other uploads. what was you yubes reason

She sure sounds goods.

is the tire you shot still inflated.... thanks for sharing wes...