Lots of projects getting finished up here shortly. We have the cs200, the Honda cr250, and the Tecate 250. Stay tuned! Please SUBSCRIBE and LIKE if you enjoyed! It really helps me out a lot! Check out my Instagram: 2_vintage_ Thank you for all the support!

@DrewHommes

3 жыл бұрын

what’re you gonna do with the tecate if you’re don’t mind me asking

@mj-mechanic9525

3 жыл бұрын

If you want to find parts go to Motorsport.com They sell oem aftermarket everything!!!!!

@kennycampbelljr5896

3 жыл бұрын

Good luck finding plastic for that bike.

@wyattmitchell7140

3 жыл бұрын

Question you must be a millionaire because you have a new bike every week Love your content dude, your awesome keep it up

@isaacblagden3510

3 жыл бұрын

that bike is running lean chec ur head bolts and intake boot gasket

“It’s even got the little rubber strap for the gas tank, wow” lmaooo this guy says the most random shit 😂😂

All the ones on marketplace near me are $1200 or above even the ones missing plastics and with blown up engines

@backyardrestorations

3 жыл бұрын

Same.

@cxbra

3 жыл бұрын

I got a SSR 125 pitbike with a big bore CR85 motor swap (you read that right) on craigslist a year ago for $480!! I could get $1500 for the motor alone!! I really lucked out with this bike, its FULLLY built (high compression 105cc big bore Wiseco, carbon reeds, FMF fatty, Hinson clutch, etc). Bro i’m meant to be the owner of this bike, 30hp and 120lbs... front wheel comes up on half throttle every gear until 4th gear! Insane bruh

@adrianpawejachimowicz5014

3 жыл бұрын

@@cxbra nice

@Blockhead_teda

3 жыл бұрын

2300 round me lol made me order a Apollo 125 😂

@theq5369

3 жыл бұрын

I mean, the cr80 is a race bike. its even quicker than most 125ccs. SUPER sought after cuz they are fast and they aren't being made anymore.1200 isn't actually a bad price

Awesome bike can't even get a Chinese bike for that price

@mototommy5525

3 жыл бұрын

In the UK I pick up Chinese bikes for between £0-£50 lol and alot of them run after a carb clean

@familymadeloyalty8227

3 жыл бұрын

I bought a Chinese bike for 325 nothing wrong runs great jus hard to find parts

@RagdollRacingInc

3 жыл бұрын

Yeah but Chinese bikes are rubbish just saying hahahahaha would not go near one

@familymadeloyalty8227

3 жыл бұрын

I agree with you. The only reason i bought it. was cause it was street legal but doesn't seem like it's supposed to be

@monkmodemalik8225

3 жыл бұрын

moto tommy what website mate

Decent little bike for the money

Most folks don't realize how bad it is to leave fuel in anything you aren't going to use. Ethanol causes alot of issues. Good job joe that was an awesome find.

Super happy with the dirtbike content, keeps me going, keep up the great work

This dude gets some right cheap bikes some of them he gets at like $400/$500 in the uk the same bikes pretty much same condition would go for over £1200 which is about $900/$1000 an this lad is picking them up at 4 an 500 dollars an some only need a quick carb clean an oil changed an air filter cleaned an off they go. Think I'm gonna start looking for some of these bargains to get, could make a killing but hats of to the lad he seems to be doing well an ya can't knock someone for doing well keep it up lad. Watch a load of your vids so now I'm gonna subscribe to your channel👌👌👍👍keep it up lad

most underrated youtuber

Make sure you sleeve that frame break with a smaller piece diameter pipe before welding it in, it'll strengthen it to ensure it doesn't snap again, plus with that rust and thickness of metal it'll help it weld easier.

bike starts after probably years of sitting, guy revvs it to the stratosphere LOL

@mikelyons469

3 жыл бұрын

🤡

@thewildside7536

3 жыл бұрын

Well it echoed through out the garage so it made it louder and last longer😄

@mikelyons469

3 жыл бұрын

@@thewildside7536 chief you've been sniffing some good glue if you're thinking that it's echoing going through a tiny garage. Joe doesn't have a clue of what he's doing everybody know dat.

@thewildside7536

3 жыл бұрын

@@mikelyons469 he prob knows a lot more than u!! How many builds have u done?did u go to college for this? Do u do this for a living?

@mikelyons469

3 жыл бұрын

@@thewildside7536 chief he hasn't done one build yet they're all abortions. I've been ripping bikes apart and putting them back together 30 years before you were born

Definitely check for air leaks by spraying starting fluid or brakeclean by boots base gasket. And check for head gasket leaks by opening radiator cap looking for bubbles

As shotgunz124 said definitely replace/check crank seals common vacuum leak on 2 strokes and often overlooked

take off flywheel cover and see of any play in crank bearings and check the crank seals and base gasket ---she sucking air in find it or you in for a hole on piston or worse

i got my 1999 xr70 for $50 bucks, new spark plug and some carb cleaner and boom runs like a charm

Hey boss a little info for you. With the popularity of two strokes today there is no problem finding what you need for any bike as far back as 1985. No problems at all

Sounds the same way my 85 did when it had a blown head gasket. It doesn’t sound as crisp as it should be, top the radiator off and start it up with the radiator cap off and watch for bubbling. If there’s bubbling it means the head gasket is blown. Don’t confuse bubbling with the water flowing, if you can see actual air bubbles then it’s the head gasket.

@christiansummers3971

3 жыл бұрын

thanks

I remember when I bought mine for 4 bills lol turned out it needed a FULL complete rebuild and much more. Put 2Gs into. Everything is tip top besides I gotta put new seals in it now 😤.

love your content! boy i wish i could locate bikes like you do it seems like there all in driving distance from your house anywho keep up the good videos i enjoy them and i learn alot watching them peace my Brother.

Look underneath the frame for stress cracks. My steel frame YZ250, after racing the hell out of it, was full of them.

You can get an air leak thru the crank seal which in turn means your crank bearings are shot. Look for oil around the seal.

wow...just wow....What a deal ! I have been trying to find a 80cc 2-stoke for so long! LOL.

Wow in the UK people are asking stupid money for bikes not even half this good, I wish I lived in that part of the world sometikes just for this reason alone ! Love your videos and find them very helpful, currently got an XR 250 R 1984, DT 125MXB 1974 and an XL125 R 1985, all project bikes, keep up the good work 👍🏻

Joe this is a killler bike damn nice for 400! If it was me I would do a leak down test on the cylinder you might be leakin from a crank seal

Love the channel, always a learning moment. You are meant for a higher purpose

Check radiator to see if its actual coolant or just straight water..if its jus water, u know its burning coolant n they jus kept adding water when it gets low ( if thats the case, u kno what u gotta do..) 😃👍👍👍👍👍👍👍👍

This video is giving me deja vu asf. My SV650 literally just had this problem where water was entering my tank due to broken drain tube in filler cap and I've just had to replace all the fuel, clean out the carbs, petcock, fuel pump etc. Now your carb is full of water contaminated gas too. MAD!

Brilliant video. Can’t wait for the next one!

Bro you always come across the sickest deals and it’s a cr how can you go wrong. Old school plastics are so dope. Also try repacking the silencer she kind of loud

BR10EG...uses the same as my 02. Those plugs are for cr80s from 82-84

Very nice cheap on honda cr 80

Your cell phone ringtone sounds like the guitar solo on Bill and Ted's Excellent Adventures

Keep the good work love the videos

Nice find man, Just scored on a super clean 1993 ktm 250sx for 460 with lots of aftermarket parts with just the connecting rod needing being replaced, would like to see you do another bottom end rebuild.

2 Days ago i got a "Locked Up" Yamaha blaster cranked it real hard and it started first kick been riding it ever since 500$ can get u alot when your lucky

damm wish it was mine love your vids man keep it up Happy Thanksgiving yall!

Get rid of that fuel filter it looks restrictive

About half way through the video. Toss that filter lol

Got a HondaSaki Cr/ kx 80 in back. Had no cr frame so we used a kx. Runs great, looks wierd. Fun play toy. Have fun, do a geound up on it and you'll have a nice seller.. great job...

Love the vids respect man

That's luck bought a bike that was suppost to be blown up but just needed carb work good deal

@EduardoGonzalez-fg2sm

3 жыл бұрын

I bought a mint condition 04 cr85 guy said it was blown all i did was put fresh gas and it runned

@fishermcmurry2269

3 жыл бұрын

i just picked up a yamaha yz250f that the guy said needed a full motor rebuild, got it home pulled the plug out kicked it over and it was hydrolocked from the float sticking, got it running great now, $300 04 yz250f.

Could use a set of fork boots to protect the tubes and seals. Great find. Everyone selling even the most clapped out bikes near me expect a fortune. Might have to travel further to find some good deals.

The longer vids are so much better mate

YOOOOOO I LOVE YOUR VIDS KEEP IT UP

That was a still nice cr80 awesome video man

Great little find here.....will make a nice bike with some TLC.......

Nice bike ! Awesome video !!!

Lot of people hate in the comments mostly think people are jealous. Good work been watching a few of your videos going to implement a lot of stuff on a 450 I got that’s not running at the moment

Revving it to the moon again baby!!!!! Oh yeah can't teach these young guys anything..... lol

@jacobplambeck6938

3 жыл бұрын

Boomer

@navyseabee7245

3 жыл бұрын

@@jacobplambeck6938 hey butthead! !

@navyseabee7245

3 жыл бұрын

@@jacobplambeck6938 what's up my nigga? ??

I'm thinking possibly the crank seals also!! If it's the clutch side it would burn oil from the transmission. The stator side is possibly the culprit!!! If it's not an intake boot leak. It did look like you tore the gasket though. Good diag!!

Love all the cr videos

I’ve watched you from almost the very beginning.

you can use a rag to wipe a 60/40 ratio of paint thinner and double boiled lindseed oil, and it will make those plastics look brand new.

Good find man!

Only half way through the video, but with good spark and great compression, the only other thing preventing a start would have to be the fuel. I wonder if that fuel filter is impedning the flow since if the whole setup is only gravity fed, and there is a pretty good bend in the already short fuel line from the petcock valve to the carburetor. Pressing play now to watch the rest!

34:17. Any holes in the expansion chamber. Just got my chamber back from the shop. Had two giant holes in it and a lot of little leaks. BTW I have a 1983 Honda cr80r.

You need a new throttle cable it’s always something simple seems strange but can solve the peoblem

@jritchiejritchie2687

3 жыл бұрын

Wrong

@michaelgarland579

7 ай бұрын

You may be right that's that's what's wrong with my Bike right now throttle cable

Take the fuel filter off usually restricts fuel flow esp on 2 stroke that not good

Crank seals I bet I would replace both sides

@jritchiejritchie2687

3 жыл бұрын

Finally somebody is shooting in the right ball park 👏

@aaronsmith9384

3 жыл бұрын

Wating for some one to tell him

The best at what you do

@2vintage why do you never clean the bike?????

Yeah I can’t ever find deals that good. I traded 2 out bikes and like $800 for my clapped 125

@motomash6143

3 жыл бұрын

Do you have a cr125 mate?

@stevenlee1075

3 жыл бұрын

@@motomash6143 YZ125

@motomash6143

3 жыл бұрын

@@stevenlee1075 nice mate nice 👍💨

Nice rad hose exhaust

I think you should look fer a ct70 to rebuild what you think 👍👍👍

If I had a dollar for every time this man said “I betcha” I’d be rich😂

Great video I wish i had a cr80 i have a crf80 from 2004

Yeah I agree with phast Phil Where are you getting these deals from ? I’m trying to find a project under 500 bucks but don’t have anywhere near the luck you do. Anyhow that’s an awesome find 👍

Another great buy!! 👍

I just bought a 1995 cr 80 for 70 bucks with bad rear shock and great compression

Man, I wanted one of these so bad when I was a kid. My buddy had a KX 80. Several guys in the neighborhood had dirt bikes. The Hondas were always fast, and broke down less. My parents said no, but didn't mind me riding my friend's. Go figure. With my luck, I probably would have been hurt badly with my own.

Invest in a leak down tester, you can even make one .

@coloradodirtbike5930

3 жыл бұрын

Leak down and compression tester tell you a lot about your engine. Must have tools for someone with dirt bikes, especially if you quick flip them.

@ashtondavis.3191

3 жыл бұрын

How you make one?

@coloradodirtbike5930

3 жыл бұрын

@@ashtondavis.3191 Pvc, a couple fittings and valves, with something to block off the exhaust side usually a rubber piece that expands known as a "freeze plug". You can find most of the parts you need to build one at your local hardware store, costs around $20. The leak down test will let you check your seals and gaskets for air leaks that could cause rich and lean running conditions. The compression tester can be used to judge the health of your top end, piston, cylinder, and rings.

@2817485160

3 жыл бұрын

CPVC adapter fitting that will fit your intake boot on your bike or quad, threaded in to a in line check valve with a tank valve at the end to add air and you screw a 0-15 psi gauge to it, to see if your loosing pressure .

@ashtondavis.3191

3 жыл бұрын

@@coloradodirtbike5930 thanks fellas

Needs crank seals

Great content and clear video, learned a lot, did you fill radiator?

@2vintage

3 жыл бұрын

Thank you! Yes I did!

Yeah that was a good trick flipping the Reed valve over the new vForce four is like a hundred and $30 but I have the 1998 of course the regular ones are cheaper I seen them for like 40 bucks something like that on eBay

What's that lift/stand you use? That looks awesome!

Do a comp. test hot, see if diff from cold will indicate broken or stuck piston ring. Good comp when cold but ring will not expand with cylinder when hot!!!

Do a leak down test. You shall find your problem if there is an air leak

Love the videos wish I could buy a bike from you bro

Nice score!

I would love to get project and work on it myself

That was my first bike. Awesome great job!!!!!!! Fuck yeah from Puerto Rico lots of love.

Bought a CR80 it had a FMF pipe mid range was awesome would wheelie. Ran great guy who sold it to me would turn off gas after riding would leak gas. Got it home removed carb and found out float needle gasket was turned sideways easy fix.

@2vintage

3 жыл бұрын

That's awesome

@deigo27derekdtboysimpson89

3 жыл бұрын

@@2vintage all these years fixin 2 strokes and u still give it throttle while kicking it over, no throttle while starting a 2stroke..

Sorry lucky, I can find anything with a title for 1500, love ya vids thts for teaching

2 bolts in the sub frame and the air box clamp and the sub frame swings up out of the way..up on the gas tank

change/remove that inline fuel filter

It takes more than fricken 10 seconds for gas and water to separate... What that thing set for 10 minutes... If you get water in the carburettor it's obvious there's water in the gas tank...

@OldestYoungenInGuidePost

3 жыл бұрын

Jody Hakamaki And the colour of it 😳 .... looks like the whole bottle of oil went into 1 tank of fuel 🤔🤷🏻‍♂️ Also I use a Auxiliary fuel tank so I can remove the tank and still work on the bike, it cost me £12 to make from an old petcock and a fuel can with some tubing😎

Over here in aus we get good deals I think, I don’t know much but I’ve seen bikes way better than that for same or even less

Still a good deal for $400,at least you got it running without having to buy a piston,good luck see ya next time..

Got one of these myself!! Cops put it in the impound just got it back!! Got to make a video of this too@ Murray mini motors

dont flip carbon reads they will break

I’d check the coil/replace the plug.. when you showed the spark it looked very faint..

Bad ass when it started 👍🏻💯

I love how he uses wd40 for the carb

@aydenbond6325

2 жыл бұрын

Actually tho. Just use carb and choke cleaner

Love ur video’s

I wonder if the expansion chamber and silencer are made for that bike

Random question but what do you use to pull out the wrist pin on pistons?

Spray aome ether or brake fluid around boot area while running, if its leaking you'll know... good luck.

Crank seals are shot in that bike. It will fry that piston.

Desert gas tank FMF pipe !

Nice one