Daughter is adorable man congratulations enjoy every moment!

I don’t ride or have ever owned any of these machines but I find it relaxing watching you work.

@Ufh9

Жыл бұрын

Try it, you won’t regret it. 💯

@hhstarwars

Жыл бұрын

It’s addicting even just rebuilding or getting on old engine running again

Steering head bearing grease, fresh fork oil and set the sag top, off radiator fluid... maybe a peek at the water pump...you're dialed for the summer.

@CameronNiemela

Жыл бұрын

Haha always more to do

@jontybennie1736

Жыл бұрын

Cause he doesn’t know this aye😂

@CameronNiemela

Жыл бұрын

@@jontybennie1736 😆😆

@earl6969

Жыл бұрын

No...cause he didn't do it fan boy.

@sosedovfrancelmx4289

Жыл бұрын

And linkage regrease😆

So much respect for you leaving the original style of plastics on it

@ayothepizzahere7638

Жыл бұрын

love the originals but newer plastics on these bikes make them so insanely clean

@augieh6146

Жыл бұрын

@@ayothepizzahere7638 well yes. But when I see it I’m like… why? I’m a strictly og plastic for that bike being ridden and at most a newer four stroke front plate and fender. I’m kinda stuck In 08-13 aesthetic ara.

@augieh6146

Жыл бұрын

Lmfaooooooo just like Cameron did! He has the same taste as me so crazy. I didn’t realize this was the video it is

Just want to say thank you Cameron you were THE inspiration for my 2001 cr250 complete rebuild. Your videos were on repeat daily til I got it put together. Keep up the content bud. Love from puyallup.

@CameronNiemela

Жыл бұрын

Love to hear it! Thanks for watching!

@Mikehoncho191

11 ай бұрын

I have a 01 cr125 and I’ve blown it up 5 times in the past four years and I barely even ride it

@user-pu9iy1dr6e

Ай бұрын

@@Mikehoncho191you suck at building. Keep trying and don’t give up. Happens to the best of us wrenchers

The leaf blower is key. I generally clean the chain before washing my bike, but rust will develop quickly on a non-lubed chain. The trusty leaf blower solves this problem. I appreciate your content. A few of your earlier videos on 2-stroke carburetors helped me quite a bit with my first 2-stroke.

Glad to see you're doing good. I'm not on KZread often. But I was while I dealt with a rare form of testicular cancer..you had your battle shortly after I was done with chemo. I sold my bike to help cover ends as I was a new father right before diagnosis, so I lived vicariously through this series 😂 I loved the attention to detail with your videos, especially this build. Hope all's well brother, much love from Florida 🤘🧡👍

Good to see u working on the 2 smokes again gotta say I've missed the uploads the last few years but health is more important anyways... love the video and can't wait to see more

Your attention to detail is outstanding!

Missed the uploads man happy your back hope you and the family are well 🤟🏼

Your bikes look amazing Cam! Great to see you are healthy mate.

Спасибо тебе , что вдохновляешь, здоровья тебе и твоим близким, смотрю из Томска , Россия.

Fork oil bud! Sooooo great to have you back man. Such great videos. Love it.

Great looking and sounding bike! Thanks for all the tips ... truly appreciated!

I really appreciate you taking the time to make this video. It's definitely a great go-through of what to do. Have you ever changed the front fork oil? I'm considering doing it soon because the seal isn't looking too great on mine.

that was so relaxing to watch keep up the great work greetings from bavaria germany

Good video buddy! Have a great spring!

Yeahh he’s backkk

Imádom ezeket a videókat mindig lehet valamit újítani.👍💪🏆

Your videos are the best dude! Bike is looking good as well 👍🏼

Glad your on the grind! Love the videos❤

Excellent detail work and upgrade tune up.

Hey Cameron how are you? Nice to see to are doing great! 😊 Keep on keepin on friend.

Satisfying!! & thorough. Love watching the videos 🫶🏽 very very mint bike!

Absolute legend. You are a champ Cam !

Just watched the whole video, thing rips after sitting for so long, rock on 👍🏻

I love it ! That 125 is slick buddy.

good to see you having fun man! Regards from Bosnia

Really Nice touch on those frame and cover tapes guard !!! 👍👍👍

Soon you might be making bikes for him to ride. So cool to see how far you’ve came over the years man. God work

Hell yeah man cam is back

The bike is lookin fresh agin love the tune up👌

It is so awesome to see you putting out another video and you daughter is just too darn cute!!! Until the next video, keep the shiny side up and the rubber side down!!!

Awesome video Cameron👏

That looks a lot bigger than a 125. I really envy and admire people that can do this type of stuff.... wish I could

That bike is a beauty! Thanks for the video.

Bike looks good man… nice job!

You had a baby!!!!? I’m so happy for you Cameron. Been watching since 2011! Was born in 01. I have seen quality in your work/ videos/ content forever.

@augieh6146

Жыл бұрын

Thought as a young kid Cameron was so sick to me. Now ook at you. I’m so happy to see you like this. My fav KZread guy. We grew up together whether Yk it or not!!!

@CameronNiemela

Жыл бұрын

Thanks dude I appreciate that! Means a lot to have your support👊👊

@augieh6146

Жыл бұрын

@@CameronNiemela I used to look up stuff on KZread and some how your videos would pop up. Chances are I didn’t have interest in xr 70s or crf 250s but the videos were intriguing. Since day one for all ages

I need to ride myself , the cr still looks great

Wish I had a dirt bike parts store upstairs 😂

@chihuahuaverde425

Жыл бұрын

Super fast shipping.

@jaype331

Жыл бұрын

And you're the ship

Good looking happy boy you got Cameron. No doubt he will be a mini Cam!

dude! that baby looks so happy!

the music is so calming.

Смотрим из Москвы, ты реально круто подходишь к обслуживанию мотоцикла. Здоровья тебе и близким)))

dude my dream bike these honda 2 strokes are the best things ever made

Blessed my dude!! Daughters rule!

Love the guards would be even better in clear!!

Hey have you ever tried aluminum brightener sprays for the raw aluminum pieces? It’s a acidic product that leaves aluminum looking polished and works wonders but you have to be careful using it around painted and rubber as well as clear plastics and glass and need to wear proper ppe when using it but i would try it if I were you cause I’m pretty sure you would like it better then using the scuff pads although those scuff pads are great. They make scuff pads that connect to a 3 inch round backing plate that connects to any standard drill and makes for easier work using the scuff pads.

I just realised how similar the pryme logo is with the ODI logo

I just bought a 03 cr125 super cheap with the water pump dripping like crazy and the head gasket not sealing well. When I went to the machine shop I asked the guys helping me to measure the cylinder with he’s gage tool and the bike is 2mm over size’s. Who ever did this build spent a lot of money to it, they did a whole Wiseco build up to it including rod crank shaft and piston vforce3 carbon reed’s fresh pro circuit full exhaust system and lectron Carb. I pretty much got a hell of a deal on it for $1,800 bucks 😂

instantly noticed the time on the clock respect lol also where can i find some grip graphics for my stator/clutch cover 06 sx 125 :)

Adorable kid…best part of the video.

Cameron you said you neglected that bike... man my crf250r takes more of a beating than that thing its dirty as heck since my pressure washer is down and I hate seeing it like that but your so called 'Neglected' bike is WAY cleaner than mine could ever be! 06 crf250r btw Edit:While watching the vid I run steel just since they last longer,making me wanna tear my bike back apart and make it clean like I built the first time maybe cleaner! and man I love your 125 and the 250 even more! cant wait for the rm to be finsihed. Been watching since your old crf250r like 5 or so years ago maybe even longer and thats what inspired me to get my 06 crf250r!

That bike is a thing of beauty 🤙

Life is good!

Twin air grand prix filter protection is the only one what will work as a extra layer. Filter will be clean..

Aluminum easier on basket, gears, spokes, hub.looking forward to track stuff. Nice to see you have a bike to just have fun on. Wonder ifl 927, Klotz, Blendzall is less toxic to be around even though gas itself spits out benzene, toluene, xylene, used to raise octane.They all seem worse than lead being added, harder to pin the donkey tail. True fuel use to claim benzene free, but that was probably over 8 years ago I seen that label on the can, doesn't say it now.

you have no idea how fast i clicked on the notification that you posted a video! love all the content cam, especially 125 content since i got a 04 and i need to get in the garage and do a spring tuneup and fix a few things as well✌️

@CameronNiemela

Жыл бұрын

I appreciate you Jake!

in every riding group theres cameron style of bike care then theres that dude that shows up with the dirt from last ride lol.

The baby was my best part of the video that dot dot had me😂

those rotors look worn imo keep up the nice vids! i would have never thought have measuring the distance from ur rear axle to ur swingarm

Now back to my RM250 bike right Cameron ? 🤔😂🤣

Give her the berries! Awesome video Cam!

Im trying out the hybrid sprockets 2 piece aluminum body and steel teeth and green anodized to match my 98 kx250 😮

A bro i have a question I just got a 2003 cr125 the person I got it from gave me a VP gas tank all ready mixed I ask him if is normal 91 gas or VP gas and he got it the same way and never used it so I want to know is there any difference what gas ⛽️ to put on it see if you can point me in the right direction thanks

Sweet little bike man !! lolool.. I say, little cause i'm 6'4 275....lololol.. Yeah, I know Big Hog Head !! lmao !! Have a Great Weekend Cam...

Love the. Guards you made! You should sell those ! I’d buy a set!

@CameronNiemela

7 ай бұрын

Thanks! I have started offering them here www.prymemx.com/collections/guards

You think this is neglected i had an 05 with socks in the back tyre instead of intertube an a buckled front wheel road it all the time used it as my transport never changed the oil an thing just kept giving

what a beautiful bike man god bless honda

I would be glad to take care of that cr125 for you at my house because it’s been 15 scent I sold mine 😢

Hey i see the link for the Grease gun, what actual grease are you using in it?

For the tool you used to brighten up your aluminum do I just buy the hand pad cleaning kit?

@CameronNiemela

Жыл бұрын

Yes, that is the one linked in the video description.

As always, your stuff looks brand new :) Just out of curiosity, why do run your tensioner/axle blocks backwards?

@CameronNiemela

Жыл бұрын

Thanks Lucas! I put them backwards so I could shorten the wheelbase and use the shortest chain possible

@lucasblazina5596

Жыл бұрын

@@CameronNiemela I never would of thought of doing that, that's smart! Thanks for answering!

I think those are heat insulators on the pads. They are probably to help keep the fluid cool. If you never experience brake fad you should be fine with out them.

Cherish those moments with the little one. You blink and they are 18!

@CameronNiemela

Жыл бұрын

Yes absolutely!!

you’re like the chris fix of the dirt bike world

Awesome video I always enjoy everyone your videos that you put out and I have to say you are definitely one awesome mechanic . truly hope you're feeling well . Every time I watch these videos I sure do miss my Honda CR250R been looking around still haven't found one but I will always remember how to rip and race a CR250R Honda the bike was like a handful and I loved it. it ran like a raped ape. and I loved it. PS if you ever run across one and you want to sell it let me know. God bless brother StayWell

I had the same sproket on my 2013 crf250r and that is crazy how a cr barely chewed it up, my 250 had snapped the teeth off😅

So why did you opt for the lighter aluminum sprocket to save horsepower, but go with an x ring chain??? just curious

@CameronNiemela

Жыл бұрын

The x ring chains last much longer than standard, and barely eat up any power. The ProX X ring chain is the same weight as most standard chains, and the friction difference is minimal. If you use a good x ring chain there is not much power loss

Smoked it so hard your hat fell off. 😂😎 another mega video!

@CameronNiemela

Жыл бұрын

Haha ripped her a little too hard

Your the nuts mate

I wanna see some riding videos of all these nice bikes!

@CameronNiemela

Жыл бұрын

There's plenty on the channel and plenty more to come!

@zpbeats3938

Жыл бұрын

@@CameronNiemela thanks for taking the time to reply! Love all the videos, keeps me going on my 98 rm250 frame up restoration!

What are the chances that we could get some of the textured grip tape for the swingarms???? My 2001 CR250 has scratches and blemishes that I’m having trouble getting out and I think it would look sick to have all matching grip tape! Just placed my order for the clutch and ignition cover tape!!

@CameronNiemela

Жыл бұрын

Thanks Michael, I appreciate your business! Swingarm decals will be available at some point as well.

@GulfCoastTuningandCalibration

Жыл бұрын

@@CameronNiemela you the man Cameron! All your videos are what help me get my bikes together!

Ik this is probably dumb question I’m sure so many people ask you this but are you devins brother? I used to watch his video’s everyday when I had my own evo and loved them and I sold it and got into dirt bikes like crazy and now I race and I was watching Matt Berger and he mentioned you so I checked you out and realized you had the same last name and looked a lot alike so I was wondering haha sorry hope you don’t mind this thank you for your amazing videos and great inspiration on your battle man so happy and proud you battled it and beat it and are back making awesome videos

@CameronNiemela

Жыл бұрын

Yep, Devin is my younger brother! I appreciate you supporting our channels!

@Joshh.49

Жыл бұрын

@@CameronNiemela anytime man! Keep it up!

I recommend you put a spacer. Behind your brake pads so your plunger isn't sticking so far out if you understand what I'm saying. I have it on all my bikes You can actually Intake the rest of the pad off

Is that assembly lube you’re using?

What is the best year for the cr125?

Yeah buddy! M2TGA!

Sick video Cameron, ibhave a crf125fb man id love the flywheel cover for both sides can you print me off some of i pay you??❤

what year is the cr125?

Honestly I'm actually really curious, what type of grease do you use in your grease gun/can? Most guys would just use WD40 and call it good but ik its water based so that would just leave the second its ridden and stiffen up again

@CameronNiemela

Жыл бұрын

It’s maxima grease

I've never understood grease on the filter. Why would dirt get past a highly compressed area of the foam instead of the uncompressed majority?

@CameronNiemela

Жыл бұрын

That’s where it seals to the airbox. Would you skip putting a gasket on your clutch cover? I did a test a few years back with a half greased lip and there was a good amount of dirt that made it past the non greased section

You make that bike look so big how tall are you??

Would scotch bright work the same for the frame?

@CameronNiemela

Жыл бұрын

Yes

Had a Honda Elsinore CR250 back in the 70's. Vicious little beast with a savage kickback.

@CameronNiemela

Жыл бұрын

Those are the real 2 strokes

Let me just go upstairs and Get some new parts😮‍💨

Cameron's neglected CR125 is still nicer than 98.5% of all used CR125's for sale, lol

Para cuando una restauración de la Crf150f 🫣

Excellent

where'd you get that grease gun? I am sick of getting grease all over my hands.

@CameronNiemela

Жыл бұрын

cjn.mx/minigreasegun