4 Cable Method and using Preamp Pedals | Fender Tone Master Pro
Музыка
The 4 Cable Method offers you lots of options when using amp models, preamp pedals and channels on your tube amp.
Buy your Fender gear from Sweetwater (Affiliate link)
sweetwater.sjv.io/WqJYaG
Пікірлер: 32
Thanks for this, went through so many videos to see how it runs through a real amp and not just a powered cab. 🤗
@DoctorMcFarlandStudios
6 ай бұрын
Glad it helped!
Great informative video doc, thanks. :)
Thank you so much. You saved my life right now. Everything working great. Of course like n subscribed 👍
Thank you for your video. I’ve set it up and works great only the looper doesn’t play back ? It appears to be recording but I can’t get it to play it back ? Any thoughts i what I could be doing wrong ? Thanks again 👍🏼
Thanks for the video. I’m still slightly confused just because the terminology. I have a fender deluxe amp with preamp out and power amp in. Will that work using this method?
@DoctorMcFarlandStudios
Ай бұрын
Sure will.
I have a stereo fender amp (2x12) mustang that i use to connect my FTMP using this method i have only one speaker working, what i need to do to have both speakers work as a stereo amp?
I have a Diezel Herbert (mk2) which is MIDI controllable (the channels and functions). Can the tone master pro control my amp within a preset if I choose to do so etc? I’d like to use 4cm whereby I have effects either in front of the amp or in the FX loop, and also run some models in the clean channel. But would still like to use the Herbert’s crunch channel generally and use the TMPs effects in the loop as if they were on a rack tray etc. many thanks Essentially, I’m trying to get rid of my pedalboard with 4cm and having a separate switcher for the amp, replace with this one single system that does it all
@DoctorMcFarlandStudios
8 ай бұрын
The TMP has some MIDI options but I haven't gotten into all that yet. I would read up on the manual for more information.
Thanks for the video. Will this work if my amp has preamp out and power amp in?
@DoctorMcFarlandStudios
Ай бұрын
Preamp Out is your Send and Power amp In is your Return. Same connections.
@MajesticFuzz
Ай бұрын
@@DoctorMcFarlandStudios thanks again. I think I tried it and wasn’t getting much volume at all. I’ll double check the way I hooked it up.
hey good video, but I have an issue. I am doing this 4CM with my Mesa Badlander, and when I add the FX loop and enable it, the volume goes drastically down. Not sure what is wrong.
@DoctorMcFarlandStudios
8 ай бұрын
Is there an fx loop level on the back of the amp?
I am running a 4cm with my Mesa Badlander, and i added the fx loop 3 block, with the fx block bypassed, perfect amp sound from the real amp, but when fx is on the volume goes down drastically! Clues? I already changed the loops, reinstalled firmaware, changed all the parameters I could and same thing. Is this a defective unit ?
@Abellyisforjelly
8 ай бұрын
😂
Thank you for your video. I was hoping you could help me with an issue: The volume coming from the Tone Master Loop is about 10% of the amp volume. I went to the preset settings and raised the volume there but it didn't help. Any thoughts? Thanks,
@wjcjr1964
7 ай бұрын
FYI: The amp is a Line Six Catalyst that I use in my practice studio. I play out with a Fender Hot Rod Deluxe. I haven't tried it with the Fender yet because it's at our rehearsal space. I'll that amp back tonight to give it a try,
@DoctorMcFarlandStudios
7 ай бұрын
are you using the FX return of the amp or the Amp input?
@wjcjr1964
7 ай бұрын
TM Loop 3 Send to amp instrument input. Amp effects loop Send to TM Return. TM Output to amp effects loop Return.@@DoctorMcFarlandStudios
@wjcjr1964
7 ай бұрын
Everything works great with the Hot Rod Deluxe. Thanks again for your video. Saved me a boat load of time trying to figure it out
It s strange you get sound without the S/R block....On the Boss GT1000 you don t. Nice video mate, thanks :)
@DoctorMcFarlandStudios
7 ай бұрын
When you bypass the FX Loop block you are breaking the 4CM connection and sending the output straight to the FX Return on the amp.
@gibson2623
7 ай бұрын
@@DoctorMcFarlandStudios Hi, ye, I got that, makes sense. Still this will not produce sound on the GT1000 with an amp. :)
When using 4cm shouldn’t the amp only model be after the effects loop on the TMP therefor bypassing the preamp of the real and only using the power section of the real amp?
@DoctorMcFarlandStudios
8 ай бұрын
If are the using the amp model and turning off the FX Loop 3 ( in my example) then all the blocks are going to the FX return anyways so the placement of the amp model before or after the FX Loop 3 block doesn't matter. When not using the amp model that block is bypassed so you will only be using the real amps preamp and any channel switching it may have.
@JD1553
8 ай бұрын
Thanks Doc 4cable has always had me confused 😊 Keep the vids coming 👍
great, this saves you from buying the cabinet.
Thanks , you could make a living explaining this thing, I sub we all sub
@DoctorMcFarlandStudios
8 ай бұрын
Well that hasn't happened yet but I am always happy to help when I can. Let me know what other topics you want to see me address.
@andrewmunson7877
6 ай бұрын
@@DoctorMcFarlandStudios Would it be possible to replace the foot-switch of a Marshall JVM 410 head but keeping all its functions ( chanel selector tone controls) with the Tonemaster Pro ?