No video
36V-48V controller converter wires understanding
Donation's
streamlabs.com...
BECOME A MEMBER HERE / @bubblesway
FOLLOW ON TWITTER / bubbles_myway
family friendly please be respectful only english please as dont no anythink else
Donation's
streamlabs.com...
BECOME A MEMBER HERE / @bubblesway
FOLLOW ON TWITTER / bubbles_myway
family friendly please be respectful only english please as dont no anythink else
Пікірлер: 50
Thumb throttle with on/off and LCD display, RED, BLACK, GREEN, YELLOW, BLUE. Controller available wires, RED, BLACK, GREEN, YELLOW, WHITE, BROWN. 1000W 48 Volt Brushless Controller. Please comment ONLY if you know which combination works! Thanks! MarkMannM2
@bubblesway
Жыл бұрын
Some converters work with the on off switch some don’t 👍
@user-pq2jl9yw1e
2 ай бұрын
My brake wire are red black got two yellow black and one orange and black
Maybe you cpuld help a brotha out. So scooter side for my throttle is the og green, black and red. However on my controller there are two options left and im not sure which is my throttle. There is a red, black and yellow or there is a red, black, yellow and green. Any help would be appreciated.
Why the hell is every brushless controller different then mine can’t find mine any where I need to hook it up on my ebike
I have a Phantomgogo R1 36v scooter. The make and model are Sine wave brushless controller 2HM-0. When I tested the 5v red wire coming out of the controller I found that the 5 volt Red Wire is pushing 17.44 volts. I am afraid of connectiing the.controller to the throttle because I do not want to damage the throttle. Is this high voltage normal or is it a defect? Will it destroy my throttle?
Where do the ignition wires go? I got a red and black extra for the ignition or for the battery I’m not sure how big go. Any help would be appreciated. Thanks.
I'm trying to conect a fan and peltier to my ebike where would I connect it It's to cool my motor
bought similar kit from amazon does not run. wires hooked up correctly, battery charged of course, did not come with display, I have a 6 pin throttle control . do think it is the convertor or the throttle
@bubblesway
7 ай бұрын
U can get a throttle with less wires but will need a different controller
Helpful video so far
I tried to hook up my 48v battery to the controller (24/36/48) and I got a arc that almost fried the conndctor
Good morning Bubbles my name is Frank Grinwis from the Netherlands and I've bought myself a new Brainpower Motor Controller 36V/48V/350W angle:120/60 Model:LSL121 and a S_866 display they came in one set (so I thought that it would be easy to connect it !! !!) Bút I've been trying to find the right wiring diagram on the internet because I can't find the wiring for my S_866 display on the controller !! Do you please help me out with this project because now I can't rode my Windgoo B20 e-bike (with gas handle ! !) Só hópéfúllý you'll be able & willing tó hélp me to fix this. Greetings Frank Grinwis
I have a sw900 screen that switches on ,was working great disconnected wires from controller to put through the mount . Reconnected all wires , screen is now showing no bars on the battery. Bike will not drive motor on any setting even walk mode. Tested battery 41.45 v . Used a resistor to connect battery so no sparks . All cables have been checked for continuity. Always wear gloves & plastic stand when connecting so no static. Its baffling me as there is power to the screen.
Could you please let me know what colour throttle wires if they r black/brown &grey what colour wires I connect them to when my controller unit is missing the wiring plugs
Hi, I'm having problems finding a replacement throttle for my 3 year old ENGWE. It has two plugs, one 3 pin plug operates the light and horn from the switches on the throttle and the other plug has a 4 pin plug and I can't find one anywhere. Can you help please?
Hi mate mysw900 has a larger 5 pin like your and a small 2 pin , I can connect the larger one but I have no idea where the small 2 pin goes an idea please .
I have a ancheer 36v ebike and I tried to install a brainpower motor controller model 866c-6 and I can not get the throttle to work the display screen does turn on but I get nothing when I turn the throttle if I connect the white learning wire the wheel will start spinning but when I try to connect throttle I get nothing plz tell me you can help me I’m out of ideas
@bubblesway
2 жыл бұрын
Sometimes some throttles won’t work with some converters if the wheel starts spinning like u said try a different throttle
@M0N0T0N0US
Жыл бұрын
Sometimes the colored wires on the throttles are installed in different sequence than the controller and then need to be taken out and matched to the controller connector.
@dannydooley6583
Жыл бұрын
how did u install the s866 lcd and throttle ive took plate off but dont know what to do next
Hi bubbles way. Looks easy enough. I have a samebike lo26 which is not powering up which I had no probs with before up till now. The lcd screen doesn’t power on to and the battery is fully charged.the only life that works on the bike is the horn only which only sounds if I press the M button and horn button together at the same time. It doesn’t sound once I let go of the M button which is weird. I’ve checked the battery and took it apart and all looks good including the prongs. You think this sounds like a controller issue? If I put a new controller in there is no soldering involved is there? Thanks.
@bubblesway
3 жыл бұрын
New controller mite fix the problem but check all wires to make sure no wires are split I had same problem once before
@rortyhfgheertstebdgsjsr3425
3 жыл бұрын
Ok thanks but if I did replace the old controller there is no soldering involved is there?
@bubblesway
3 жыл бұрын
@@rortyhfgheertstebdgsjsr3425 nope
@rortyhfgheertstebdgsjsr3425
3 жыл бұрын
@@bubblesway ok thanks bubbles way. One more question Any idea where I can order a controller for the samebike lo26 as I’ve noticed on eBay and AliExpress there’s so many out there but I don’t know what one will be compatible with it mate.
@bubblesway
3 жыл бұрын
@@rortyhfgheertstebdgsjsr3425 get a 48v controller from eBay
Hey I don't have that connection to how do I hook up the wires when I don't have that connection only got one set of the five wires coming out of my module
hello, a question, these instructions in this video are also useful for scooters, thanks
@bubblesway
2 жыл бұрын
Yes same for scooters 🛴
I have a question the controller I just bought has all the same connectors except the light connectors,here in stuck you see this controler has 2x 1pin yellow wire for the lights my bike has 2x2pin red and black how do i connect my lights anyone please
What is the power lock wire for on a Motor Controller Box
How can I hook up the charge port on the scooter to my replacement controller ?
Hello there, I wonder how to set the controller to handle 36v or 48v (mine is 36v battery), does the controller auto detect the battery voltage? Thanks!
@bubblesway
11 ай бұрын
No u set the volts ur self
Hi .my controller is 36/48volts written.can i direct to 48 volts battery?
@bubblesway
Жыл бұрын
Yes 👍
@cristimz1659
Жыл бұрын
Thank you very much for reply....even if i full throttle in long duration flat road?
Will a bike work if the display is disconnected?
@bubblesway
11 күн бұрын
@@robertsquires2816 no
Hi thanks for video, my wife’s e-bike stopped working, looked at control, looked like one of the capacitors had burnt out , so I replaced it , plugged controller back , think I have all the connections ok , but now I get an Error code 009 then it turns to code 010 , I know it’s a bit of a long shoot , but any idea what it might be ? I’ve ordered another controller but the wires aren’t the same 😮 . Kind regards Chris
@bubblesway
3 ай бұрын
The break wires
just for information purposes the name for the yellow battery connector is an XT-60 usually used in hobby RC stuff also
Your not getting to point of using converter from controller there are normally red and black that's for 22v step down. The converter has black and red and yellow. You connect red tred and black to black on controller the yellow wire you can run alit of wires from yellow for light indercator headlight horn Al from yellow wire so why did you not explain in video. I got that info from another video. It's best to put yellow in a loop contector box it looks like choc box then each live wire goes to yellow with switch in between the black wire from controller that's already in converta you yes that as a earth that's it more ore less so yes I can run all lights as long the are 22v from yellow wire
Yo whats up buddy hope u well been a while but this is awsome sorry i haven't around much
@bubblesway
3 жыл бұрын
That’s ok everyone gets busy bro how u doing
@rahulslife9757
3 жыл бұрын
@@bubblesway i been good hbu
@bubblesway
3 жыл бұрын
@@rahulslife9757 I’m ok thx bro
@rahulslife9757
3 жыл бұрын
@@bubblesway when u going live