Amazing job! Those inexpensive locks definitely aren't adequate for stopping thieves! Thanks again for all the time, effort, and expense you put into these videos and looking forward to your next video!

@electronicsNmore

4 жыл бұрын

Thanks Todd! Glad you enjoyed the video. Looking forward to your next video on Monday.

@joblessalex

3 жыл бұрын

You two are some of the best informative youtubers on the platform. Keep it up!

@kthwkr

3 жыл бұрын

It's been my experience that thieves are generally stupid. My car was broken into by a thief. They took nothing because I had nothing in it. But the window was smashed. At work the next day a fellow employee who had a juvenile record (but was now going straight) laughed at the stupidity of the thief. He whipped out his pocket knife and had my window open in about two seconds. No damage. When my house was burgled they just smashed through the door instead of trying the knob. It was unlocked. I had to buy a new door.

@kinguin7

3 жыл бұрын

@@kthwkr yup, a better lock is better of course. Have to consider the system as a whole though, not much reason to put a vault door next to a single pane bay window.

@PHamster

2 жыл бұрын

LPL will pick that in two seconds

Outstanding explanation now my wife understands why our locks cost so much!!! Thank you

@electronicsNmore

4 жыл бұрын

Glad you enjoyed it Lee! Be sure to check out my wide range of videos below, and most importantly share. Thank you kzread.infoplaylists

That was one of the best explanations of how a Medeco Lock works. 👍🏻

@electronicsNmore

4 жыл бұрын

Thanks Frank! Sadly there are many inferior videos on YT that got much higher view counts than mine, and I put much more work/detail into my video. I have viewers that don't share, so the video ends up being a waste of time for me.

That lock is worth every last cent... Thanks for the video and the tutorial...

@electronicsNmore

4 жыл бұрын

You're welcome!

This is the most informative video on deadbolt I have seen so far!! Thank you for sharing your knowledge!

@electronicsNmore

3 жыл бұрын

Glad you enjoyed it!

I find it great to be show around this way ~ and also this is a genuine pleasure to listen to, too

@electronicsNmore

4 жыл бұрын

Glad you enjoyed the video! Be sure to watch my "Locksmith & bypass Tools" video playlist below, and most importantly share my channel with others. Thanks kzread.info/dash/bejne/aH6ht9CIYbu_f84.html

Informative video. I can only reiterate what the previous 86 comments have said. Actually learned quite a bit. Will definitely share and subscribe. Thanks for taking the time to make it.

@electronicsNmore

4 жыл бұрын

Glad you enjoyed it! Be sure to watch my "Locksmith" video playlist below, rate thumbs up, and most importantly share. Thank you kzread.info/dash/bejne/aH6ht9CIYbu_f84.html

Very well made video. One of the few, if not, the only one I’ve seen that shows extreme details. Thank you sir.

@electronicsNmore

4 жыл бұрын

Thank you! A lot of time went into making the video. Sadly the video was a waste of my time because very few viewers took the time to share the video link on social networking sites, and as usual, YT hides the video way down the search results. Stay safe.

One thing to consider is that you're protected as much as the weakest link. Such a lock would be overkill on most homes, as there are other potential entry points that would be quicker and easier than trying to pick the front door lock, such an open window, patio door(which can often be unlocked by just lifting the door), visible door hinges, etc. For the most part, a lock is just a deterrent, but a thief who know what he's doing will find a way to get in if he really wants to.

@N54bryce

Жыл бұрын

this is true, my situation is opposite to most though. I moved into a house in the city that already has bars over the windows, on the inside, a solid wood front door and a security door to cover the back door but they used deadbolts that can be raked open. covering the main points of entry but as you say if someone really wants to get in they will always be able to go through your walls or floor if they bring the tools.

Much better lock than I guessed. Thank you!

@electronicsNmore

4 жыл бұрын

Glad you liked my video! Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. Thank you, and stay safe! kzread.infoplaylists

This is one of the best videos like this that I have seen! I've been watching lock picking videos for a while just to learn how it all works but I never really understood what I was looking at until this demonstration. You did an amazing job showing and explaining everything here. Thanks for this =)

@electronicsNmore

2 жыл бұрын

Awesome, thank you! Be sure to check out my lock related video playlist below and share. kzread.info/head/PLQ6IOhUBblU1vY1JwQCHE-4_VscJ0XTVv

Wow great video. I have Medeco locks on my doors because a friend recommended them. He said they are much better locks. I had no idea how much better. I feel much better about spending the money on them.

I really enjoyed this video, thank you.

@electronicsNmore

4 жыл бұрын

Great to hear! Be sure to share. Thank you

Wow! I never knew! Now I know why those Medeco's cost a king's ransom. And worth every penny, if I'm any judge.

@electronicsNmore

4 жыл бұрын

You should enjoy my video playlist below. :-) Thanks for watching! kzread.info/dash/bejne/aH6ht9CIYbu_f84.html

Awesome video. excellent close up video detail & explanation !!

@electronicsNmore

2 жыл бұрын

Glad you liked it! Please share the video link with others. Thank you

Hi Doug. Great explanation has always. Liked,Shared,Add to playlists. All my best.

@electronicsNmore

4 жыл бұрын

Thanks for watching Bobby!

Thanks for the video! I now dread working on medeco Locks even more!

@electronicsNmore

3 жыл бұрын

You're welcome Sonny! Be sure to watch and share my "Locksmith Tools & Picking" video playlist below. Thank you kzread.info/head/PLQ6IOhUBblU1vY1JwQCHE-4_VscJ0XTVv

Interesting fact: both locks shown are actually brands of the same parent company. People will spend $30/month (or more) for an alarm system to tell them when their stuff got stolen, but balk at the idea of paying more than $45 per lock to try and secure it from being stolen in the first place. SMH.

Well I learned a ton of how locks actually work. Not sure exactly what this is going to do for me in my day to day, but hey, it's good to know things regardless.

Medeco makes great locks. The intruder would probably smash a window before trying to defeat a Medeco.

An excellent and consise demonstration of medico security. That takes some effort to frame and focus all of those close-up segments. Nice vid. 😎

@electronicsNmore

4 жыл бұрын

Thank you! I always try to produce the best video about a particular subject. Many others don't explain as well, or provide good up close video/images.

nice video but for most criminals the lock does not matter the wood around it does when you kick it in

@electronicsNmore

3 жыл бұрын

There are many strong solid wood and steel doors/jambs out there. :-)

Works great! Exactly what I needed.

Great detailed video

Excellent demo!

@electronicsNmore

3 жыл бұрын

Glad you liked it John! Be sure to look over my lock related video playlist below and most importantly share. Thank you kzread.info/head/PLQ6IOhUBblU1vY1JwQCHE-4_VscJ0XTVv

I just stumbled on your channel. Excellent video. Thanks for this!

@electronicsNmore

3 жыл бұрын

Great to hear, and you're welcome! Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No additional cost to you), and share links to my videos with many others on social networking sites. Thank you kzread.infoplaylists

Excellent demonstration video.

@electronicsNmore

3 жыл бұрын

Glad you enjoyed it! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my lock related playlist below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thanks kzread.info/head/PLQ6IOhUBblU1vY1JwQCHE-4_VscJ0XTVv

Great presentation, thanks!

@electronicsNmore

4 жыл бұрын

Glad you enjoyed it! Be sure to watch my "Locksmith & bypass Tools" video playlist below, and most importantly share my channel with others. Thank you kzread.info/dash/bejne/aH6ht9CIYbu_f84.html

Great video. Very good explanation.

@electronicsNmore

4 жыл бұрын

Thanks Jesse! Be sure to look over my "Locksmith & Bypass Tools" video playlist below for other videos of interest to you. kzread.info/dash/bejne/aH6ht9CIYbu_f84.html

Wow !! I need to get a new door lock and you not only gave a great demonstration, you also made it clear as to why some locks are worth spending the extra money for. Thanks very much. Liked and subbed

@electronicsNmore

3 жыл бұрын

Glad I could help! You're welcome. Be sure to use supplied affiliate links to support my work. Thank you

@notsosilentmajority1

3 жыл бұрын

@@electronicsNmore 👍🏼

Thanks for guidance

Thanks for the proper and knowledgeable review.

Awesome video! Especially close ups!

@electronicsNmore

2 жыл бұрын

Glad you enjoyed it! Be sure to check out my lock related and other video playists, as well as share. Thank you

Thank you for this great information!👍

@electronicsNmore

Жыл бұрын

Glad it was helpful!

Wow that was super interesting!

@electronicsNmore

4 жыл бұрын

Glad you liked it! Be sure to share. Thanks

Great explanation

@electronicsNmore

2 жыл бұрын

Glad you think so!

"Virtually Impossible to Pick" ... Unless you're the Lock Picking Lawyer!

Amazing! Now I understand why they cost so much.

@electronicsNmore

3 жыл бұрын

Glad you liked the video! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thank you kzread.infoplaylists

Très bonne explication , grand merci .

@saiskanda

4 жыл бұрын

Doe sit translate to "very good explanation, thank you very much" ?

@electronicsNmore

4 жыл бұрын

De rien! S'il vous plaît partager. Je vous remercie

Awesome to know

@electronicsNmore

3 жыл бұрын

Thanks for watching Mike! Be sure to check out my locksmith video playlist and share.

I really enjoyed this video, thank you i would like to see a video how to repind a medical core

@electronicsNmore

4 жыл бұрын

Glad you enjoyed it Ray! Be sure to watch my "Locksmith & Bypass Tools" video playlist below and share. Thank you kzread.info/dash/bejne/aH6ht9CIYbu_f84.html

nice view into medeco....

Great and detailed video on why these cost so much! As a new lock picking hobbyist, I want to upgrade my junk Kwiksets, and will probably get something in between such as Schlage. These are really nice, but way over my budget.

@electronicsNmore

3 жыл бұрын

Great to hear Rob! Be sure to watch my lock related video playlist below and share. Thank you kzread.info/dash/bejne/aH6ht9CIYbu_f84.html

@joethomas6041

3 жыл бұрын

Schlages a good medium. But reinforcing your door is key. And just as expensive. A criminal got ahold of my keys living with my grandma, and as an ignorant teenager I immediately reneged everything to Schlage, most I could afford. Well, they just kicked the door in broad day. Opsec is important. Know your potential enemy, their capabilities and prepare accordingly. I looked into lock smithing and was terrrifed to “wake up” As a victim of stocking. Luckily now a days... jokes on them and nothings gonna shake me. The predator is missing the part of their brain to contemplate consequences. It was a journey but for a couple years it was pretty scary. Sorry to go off topic but with the dark web, stay out of the spot lite with friends, famous, colleges. Sometimes they just hire a criminal for them...

As a locksmith I approve this video...Lol

True engineering

@electronicsNmore

4 жыл бұрын

Medeco makes a good lock. Thanks for watching!

When I lived in America, I worked for a large city on the east coast that had Medeco locks in every facility they had. I was not an actual locksmith but being in maintenance we sometimes would remove cylinders from doors and have them re keyed for allowing or removing sub master keys to access that lock or set of locks for cleaning crew convenience. I had 4 master keys that were for almost every Parks facility and office building in that city, that accessed probably more than 3000 doors. Whenever I took a cylinder in for re keying I had to have a letter from my manager permitting the locksmith vendor to cut and turn over to me keys for these cylinders The letter was good only for that one day and only for the specified services and number of keys. No letter meant no turnover of keys by the vendor. The policy was every time enforced as it should be by Medeco authorized locksmiths. If a master key was ever lost every lock on that master key would have to be re keyed and the unlucky employee would likely have been terminated. Thankfully when I was there it never happened. Those locks are built like a tank. Excellent informative video, thanks for showing us the inner workings.

@electronicsNmore

4 жыл бұрын

Glad you enjoyed my video! Thanks for watching, and thanks for the comment.

@RR98guy

4 жыл бұрын

@@electronicsNmore Your welcome!

And as always have a nice day

@electronicsNmore

4 жыл бұрын

You sound like the LPL. :-)

Excellent video as always but what about Bump Keying regarding cheap dead bolts?

@electronicsNmore

4 жыл бұрын

Thank you. Yes, a common pin tumbler deadbolt can be bumped fairly easily, but not the Medeco.

Put longer screws in the door frame, the little brass screws need to be replaced (I used decking screws). Thanks for info, I wondered what the difference was between the cheap locks and the good ones.

@electronicsNmore

4 жыл бұрын

Yes, always use long, strong screws into the door jamb. Thanks for watching! Be sure to share.

@louisrucci6043

4 жыл бұрын

Long ago I installed a 3/8" piece of steel between the door jamb and framing stud. Drilled appropriate holes for the 3" deck screws and bolt. One day we came home and saw the jamb separated along the finger joint, inside, that these cheap jamb are made of. Suffice it to say, no one got in and all I did was hammer it back in place. Sometimes you need more than wood to keep the door shut.

And hardened steel inserts inside the pins.

On that medeco is that letter on the left and number on the right on the bottom of the lock the date of manufacturer?

Those look like t pins in the medeco. My m1 does not have any security pins in it but it has master wafers in it! I almost lost a side bar spring when one came off , I super glued those suckers. On there so that cannot happen again!

How do you buy one of these high security locks in Canada? Is it possible for a consumer to buy one?

If you want to save some $$ just get yourself a commercial grade 2 deadbolt, they're around $30 and you'll be just fine against most drilling attacks

Problem with medeco is if you know what the main code to the lock is you can just make a key without the v cuts and it will usually open because the side bar is already aligned from original key. As long as the pins don't turn the lock will open! All you have to do with the qwickset is take all the top pins out and replace them with spool pins! M 3s are harder but a paper clip will engage the side bar if you have a weird key!

Clearly Medeco locks are pretty dam good..

@electronicsNmore

3 жыл бұрын

They sure are. Thanks for watching Chris! Be sure to rate thumbs up, subscribe, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. kzread.infoplaylists

Thanks for teaching me how to break into homes lol. Now I know how to stop it.

@electronicsNmore

4 жыл бұрын

It's amazing how many people spend $800 - $1200 on a smartphone they don't need, but only spend $15-$50 on a deadbolt to protect that phone and much more.

@MinecraftPro97k

4 жыл бұрын

@@electronicsNmore My phone is on the mid-end side. Around $100. The iPhones are overpriced

@Ghost_Os

4 жыл бұрын

Oh, come on, a lock is a lock, right? As long as it keeps the door shut! I'm a locksmith, I hear that all the time.

Just looked these up on amazon, it's obvious these are not being sold by an authorized company (duh, it's amazon) and the comments by the 1 star reviewers make me lose even more faith in humanity.

Does anyone know Mortise and this one, which is more secure?

I prefer $10 deadbolt for my house as I don't have nothing expensive in my house.

@electronicsNmore

3 жыл бұрын

Makes sense.

Good explanation video, why do I need this deadbolt as all my windows and patio door are made up of glass and anyone can break it and get in easily 😉☺️. Why did the thives struggle with this deadbolt.

@fehlrock

2 жыл бұрын

So thieves can't take your stuff out the door. They would have to take stolen goods back out the window !

So you cannot use a follower with this lock?

Is it possible to put a Medeco deadbolt into a smartlock? When I'm not home, I want to be able to unlock my door remotely for emergency repair entries without giving my door key to anyone. However, when I'm home, I want to have the security of the deadbolt for no entry at all. I realize that will reduce my security when I'm not home. However, it's better than having zero security 24/7 by giving my key to a stranger.

The medico deadbolt should be standard on every door.

No me recuerdo mucho pero creó que eran de esa

The thing with deadbolts on your front door is, if there is glass on the door, and the deadbolt has a knob on the inside, well, just break the glass and reach in to open it, no matter how expensive it is. You can have double lock cylinders on it, but thats risky and against some bylaws. Better to have a solid door with no glass for these to make a real difference.

@electronicsNmore

3 жыл бұрын

Double cylinders is the only way to go when you have a sidelight.

I am buying a new house and want to have all my locks keyed to one key. Is this possible if I use a few of these and regular door locks ?

@electronicsNmore

3 жыл бұрын

You can do that if all keys are the same.

Don’t forget that the sidebar has a ball bearing on the front side of it.

I would have preferred a 50$ lock vs a 200$ lock xD Like the Schlage b60n or the Kwikset 980

@electronicsNmore

2 жыл бұрын

You'd be surprised how many people buy the cheaper deadbolts.

Very well done video/explanation of medeco m3! Have you ever managed to pick one yourself? At the company I work for, we prefer to sell abloy, tbh. Some of the reasons are because medeco keys can often break, or the heavily used ones are easy to pick. I was on a site one time where I had to pick a medeco m3 that was very used... at first I thought it would be a challenge, but I was able to open it within 20 seconds! Not that people would try to pick it really, and also, i have a lot of experience picking high security locks... but still, i was thoroughly surprised how fast I got it open haha. Now they have the m4, which I haven't gotten to play around with yet, but from what I can see it's decent step up in picking difficulty. I can't pick abloys though... yet! Haha Cheers, thanks for the fun and informative video 😀👍

@electronicsNmore

2 жыл бұрын

Abloys are really tough to pick. Glad you liked the video!

Great training video for thieves. Thanks a bunch.

@electronicsNmore

3 жыл бұрын

98% of the public shouldn't be deprived because of a handful of degenerates. How I see it.

If a door is locked, regardless of the lock, wouldn't a thief just try to break a window?

@electronicsNmore

2 жыл бұрын

Too much noise.

My reservation is, if I get locked out and need a locksmith to pick it, how do they deal with a high security lock?

@nullaccount7529

2 ай бұрын

I’ve seen a locksmith drill a Medeco. But maybe he wasn’t skilled enough to pick it?

well even if you buy a 10 000 door lock, you still have windows a kid could break... I'm removing my medeco today cause we only have a key and don't have time to do through the hassle of finding how to make a double. Not very practical when you have difficulty to access your own home. Any tip on how to remove that lock???

@electronicsNmore

3 жыл бұрын

The face plate around the keyway is removed on the inside of the residence to access the screws.

@STROBdotNET

3 жыл бұрын

@@electronicsNmore Thanks I found a video explaining how to do just that.

The drawback with madeco s when d key s lost the only way to enter s to break the door. 😊

@electronicsNmore

3 жыл бұрын

Or you can do what I did. :-) kzread.info/dash/bejne/a3aBxqeShceqZdY.html

@jovb143

3 жыл бұрын

@@electronicsNmore wow that’s awesome man!! Very cool. Thanx for the tip this will come handy one day. 😊

"Cheap Deadbolt Security vs Expensive Medeco Deadbolt" Or, How to get your money's worth and real security when buying a deadbolt lock!

@ScoDavidson

3 жыл бұрын

OR, "How to pick a deadbolt like those guys in the movies" haha

Interesting. Now how do i put the Medeco logo on the cheap lock. LOL Any way the company can pays you to showcase it so well to so many? Or do you get money from Amazon? Maybe you should explain how that works with affiliate links. Thanks

@electronicsNmore

4 жыл бұрын

Getting paid? LOL I've never been paid by any company to make a video, unlike many other YT channels. I always decline cash offers to make videos. Any products I show, I either purchased or requested to have sent to me. I decided to make this video on my own. Since I took the time to produce such a quality video, why not post a link to the type of deadbolt that I own? If my video influenced a person to buy a Medeco, then I certainly deserve to be compensated for it. Why should Medeco get free advertising? Would you spend 12 hours making a video for $10 in ad revenue? I don't think so. I modified the video description area to make it clear. Thank you

Lock picking lawyer would love to have a word with you. $30 is same as your $200

Where do you buy these locks from ?

@electronicsNmore

3 жыл бұрын

Hi there. You can buy Medeco M3's at the link below. Thanks for watching! amzn.to/2DXLZAX (Affiliate Link)

@ngb802

3 жыл бұрын

electronicsNmore thank you , this lock is the only well built thing I haven seen in a very long time

So how long til that key gets worn and no longer works? And how much dirt or debris will render the lock useless? That's what I also wonder when I see such small cuts and angles cut in the key.

@newyorkval1478

4 жыл бұрын

Twenty years and up. I have Medecos on my house, office, storage space and my truck cabinets. My neighbors have had break-ins, but I haven't even been touched.

@electronicsNmore

4 жыл бұрын

They last a very long time. The one in the video was at least 8 -10yrs old, and it was close to the ocean

@aurthorthing7403

4 жыл бұрын

@@electronicsNmore I'm curious how well they would fair in the desert or dry sand and dusty environments?

@electronicsNmore

4 жыл бұрын

@@aurthorthing7403 All locks don't do well under those conditions. If you're worried about that, then use a keypad deadbolt.

@ComputerGuyAndy

4 жыл бұрын

@@newyorkval1478 they know better...

Very impressive lock, too bad it is a royal pain to get one.

@electronicsNmore

2 жыл бұрын

Last I checked, you can buy them on Amazon. I think I placed a link in the video description area. Thanks for watching!

In 95% of residential applications it would be just as easy to kick the door in with either.

@electronicsNmore

2 жыл бұрын

Many homes have out swinging doors, good luck.

@scrappyjackalope9558

2 жыл бұрын

@@electronicsNmore my point was, one lock is far superior and actually impressive to me. But I can see people rushing out to buy a high dollar lock to put on a door that can easily be defeated no matter the lock. Great video by the way. Great explanation..

Why use any brass at all? Isn't brass soft?

@electronicsNmore

3 жыл бұрын

Soft, but harder than copper.

Why not use stainless steel instead of brass ? Forgive me.....

Can that Medeco lock get picked. If it can about how long does it take? Those cheap deadbolts take 20 seconds or less.

@electronicsNmore

4 жыл бұрын

It's possible, but it's extremely difficult to get everything manipulated just right. No one would ever attempt to pick that type of lock. Thanks for watching!

@donaldcampbell7894

4 жыл бұрын

Crime is on a time constraint. Can the lock be picked??? Sure. The are very smart people out there. But could it be picked quick enough to make a crime feasible. I don’t think so. Locks only keep honest people honest. Hell a carbide drill will make short work of that lock. I don’t care how hard it is. Or a grinder. But the effort needed is the deterrent. A person with that arsenal will not be breaking into your home. They have their eyes on larger real-estate. Lol. Plus if the lock is too tough, just kick the door in. Just saying.

@aaronv6091

4 жыл бұрын

@@electronicsNmore kzread.info/dash/bejne/lqCDp9RymJefYMo.html It takes them ~1:20. With nothing but a rake. If you're good, you're good, and nothing with external access is going to stop you.

@electronicsNmore

4 жыл бұрын

@@aaronv6091 Good luck trying that on an unknown Medeco.

@aaronv6091

4 жыл бұрын

@@electronicsNmore He didn't need luck, did he? Claims vs evidence. I've seen a modified electric toothbrush take down a $150+ lockset myself. Your words vs what I've personally witnessed. No brainer. If you're good enough, no engineering will stop you. Otherwise, people would just buy lexan windows and Medeco locks and ADT and Ring would be out of business. No lock is the end-all, be-all.

Talk about price gouging!

I have a tool that unlocks every lock... It's called SEMTEX! 😁

@electronicsNmore

4 жыл бұрын

I hope the ATF isn't monitoring you. :-)

@underverser

4 жыл бұрын

@@electronicsNmore No they won't... It is clear that i'm not criminal/hostile... 😊

@FranzFerdinandVIII

3 жыл бұрын

i immediately thought "EMTEK"

That's great...most thieves...if not all, force the door...lock at the end of the day is a non-issue.

Have you ever checked out the lock cylinders from Banggood? I'm wondering how good they are and how easily they can be inserted into an existing deadbolt lock. This one has 7 pins. www.banggood.com/Aluminum-Home-Safety-Lock-Cylinder-Door-Cabinet-Lock-With-3-Keys-p-1097801.html

@BrandonBaumvideo

4 жыл бұрын

That one is $7. I think there's your answer as to how "good" they are. The quality looks absolutely horrible as it looks like it was cast instead of milled and it says its made out of aluminum which no lock should be made out of. It also doesn't matter how many pins there are if the tolerances are horrible cause you will still be able to rake it in a matter of seconds. Chances are the pins in that lock are double-sided and the holes for the pins are beveled making it even easier to pick than just bad tolerances.

Medeco vs abloy?

@electronicsNmore

3 жыл бұрын

Could be in the future. :-) More people need to share this video to make that one worthwhile. Thanks for watching Joe! Be sure to check out my "Lock" video playlist below and share. kzread.info/head/PLQ6IOhUBblU1vY1JwQCHE-4_VscJ0XTVv

I like the Medeco but it's not practical for most americans. For one, the lock on the door is only as secure as the door and many houses have cheap doors. And a knowledge thief will know which house has the more expensive stuff inside by seeing which house has the super expensive locks on the door.

Funny how easy it is to drill trough Medeco or any commercial lock really 🤷🤦

@electronicsNmore

3 жыл бұрын

Shouldn't be with all those hardened steel pins.

Both were probably made in the same factory in China!

@electronicsNmore

3 жыл бұрын

LOL. No, Medeco is US made.

I PICK LOCKS! i know how its done! i have the grade of "GIRL SCOUT." i also have lock parts. you said that you had changed it from a 5 to 6 pin. how, and which type of lock specifically did you use! im familiar with how it is done, i smiply install pins, i have many "spools" and "serrated" but you need an extra hole and you have to undue the top cap which was not meant to be removed and consequently it is not as easily as it sounds.

@blaknbeauty1

Жыл бұрын

Can you pick a deadbolt in freezing weather???

Buyer beware why spend $ 200.00 on a lock. If you lose your key the lock will most likely need to be drilled to gain access to your home thus the lock will be destroyed. You are better off investing in a camera or alarm that will notify you in case of break in.

I'll take the $30 dollar Yale dead bolt! The Medeco is a piece of junk! Four pins? Versus six? I'll save $170 dollars and be more Secure!

This: /watch?v=4fh6IHCr7uo is very disheartening for anyone trying to secure anything with a lock. Obviously the _average_ thief is not going to be this skilled, but it does show that someone who is determined can get through these locks in a very surprisingly short period of time.

@electronicsNmore

4 жыл бұрын

Don't be fooled. It's not the same lock. It isn't an M3. It doesn't have the spring loaded mechanism that needs to be pressed to release the sidebar while "trying" to manipulate the pins. LPL is good, but not that good that he'll be picking Medecos with no problem.

@tarstarkusz

4 жыл бұрын

OK. I thought it was the same because he talked about the same type of anti-pick features that were highlighted here including the side-bar and the turning pieces. I guess there is always an "arms race" between the lock makers and the thieves.

7:40. Got your machinist lingo reversed? Tolerance is the disparity. High disparity is junk. Low tolerance means measurements are close and less play, slop etc. which is good in this application.

...and then the criminal kicks the door in, ignoring the quality of the lock :(

@electronicsNmore

3 жыл бұрын

If you can afford a good lock, usually you'll have a solid door and frame.

@shawn2380

3 жыл бұрын

@@electronicsNmore Exactly what I was intimating, Every break in I have personal knowledge off all occurred through unlocked door/window (mostly door) or kicked in door or jimmied window. None through lock picking

@shawn2380

3 жыл бұрын

BTW I just found your channel and subscribed