For anyone saying just use superglue, some plastics (if it says PP or PE) are oily and only get glued by melting. There are some very expensive industrial glues for these plastics that still will not hold as well as melting. Very good video.

@tipsintelligent2605

2 ай бұрын

Thanks mạn

You've given me new appreciation for my soldering pen. Thanks!

Amazing. The hot blade for cutting plastic was brilliant.

@tipsintelligent2605

8 ай бұрын

Thanks man

Excellent tips on how to weld plastics and make useful tips for a soldering iron. One suggestion on the triangle plastic repair: The metal mesh used is a little too small as it should overlap on the borders of the repair piece. Also, consider using the plastic from the offcut (the broken piece) to melt over the mesh to fully cover it. If you don't have stainless steel mesh, use fly screen mesh....or a small piece of NEW steel wool, the one you use to wash dishes. Keep them coming!

@tipsintelligent2605

10 ай бұрын

Thanks man

Thank you for recording and posting this educational video.

@tipsintelligent2605

10 ай бұрын

Thanks bro

Welding is very accurate, very durable and beautiful

Brilliant solutions! Excellent strength. Thank you.

Du beau travail avec plein de bonnes idées ! Merci .

@tipsintelligent2605

Жыл бұрын

Thank you for supporting the channel

Amazing Talent, I am also doing the same... Love from Pakistan

How to weld plastic very well

Nicely done! Thank you.

Brilliantly done

The welding method is as durable and beautiful as new, it's amazing

@tipsintelligent2605

2 ай бұрын

Thanks dude

Ganz tolle Ideen und Umsetzung. Vielen Dank für die Inspirationen. Alles Gute.

@tipsintelligent2605

10 ай бұрын

Thank you for supporting the channel

THANKS FOR THE TIPS

I had no idea you can do this thanks for the information bud now I'm so going to try this out

@tipsintelligent2605

Ай бұрын

Ok man

Thank you and great work

@tipsintelligent2605

11 ай бұрын

Thank you for supporting the channel

The best kreatif and inofatif

Two thumbs up!

great, thank you

great.

@tipsintelligent2605

10 ай бұрын

Thanks man

Very very very nice good idea superb bhai

exactly what I needed

@tipsintelligent2605

11 күн бұрын

Thanks bro

Great. Thanks a lot

@tipsintelligent2605

11 ай бұрын

Thanks bro

спасибо умница что делишься опытом

Excellent!

@tipsintelligent2605

Ай бұрын

Thanks bro

Video anda sangat berguna. Semoga bermanfaat bagi yang nonton

Very smart thanks sharing

@tipsintelligent2605

11 ай бұрын

Thanks bro

Thanks! Genial!

@tipsintelligent2605

9 ай бұрын

Ok man

да , капец , починил , сломав сетку нормальную

Great idea

@tipsintelligent2605

4 ай бұрын

Thanks bro

بسیار عالی و کاربردی. ❤❤❤❤

@tipsintelligent2605

10 ай бұрын

Thanks bro

amazing😮

@tipsintelligent2605

11 ай бұрын

Thanks bro

Great 👍👍👍

@tipsintelligent2605

10 ай бұрын

Thanks bro

The only thing super glue sticks is skin! This is great, I will be trying it 🙂

i call this by gambiarra. its a vast knowledge that we learn in Brazil

@tipsintelligent2605

10 ай бұрын

Thank you for supporting the channel

I usually use coconut fibre and glue ,its work well too

@tipsintelligent2605

Жыл бұрын

Thank you for suggesting me

@redpost2380

10 ай бұрын

I guess it depends on what fiber you have available. Steel wool is cheap and one piece can be used to repair dozens of plastic cracks. You can also use a piece of cotton like from a shirt....NOT Polyester..:)

@agungh1670

10 ай бұрын

@@redpost2380 yes, i agree, as javanese i have a lot of coconut fibre and coconut tree ( four at my family backyard)

@tipsintelligent2605

10 ай бұрын

Thank you for your suggestion

@CreatorTips.007

14 күн бұрын

@@tipsintelligent2605 Great job, man

Được đấy bạn

1:12 like a hot knife through plastic!

@tipsintelligent2605

Ай бұрын

Ok man

That power socket!

Good ❤❤❤

Thank you for watching. It's very useful when I need to use it ❤❤❤

@tipsintelligent2605

9 ай бұрын

Thank you for supporting the channel

잘보고갑니다 👍 😊

@tipsintelligent2605

8 ай бұрын

Thanks bro

@JjGo-story

8 ай бұрын

@@tipsintelligent2605 good bro

Awesome

@tipsintelligent2605

11 ай бұрын

Thanks man

What do you do by that fast strikes with the yellow-and-grey pen-type item at the end of each session?? Probably you had liked to demonstrate the hardness of the resulted repair?

@tipsintelligent2605

6 ай бұрын

Ok man

Gre🎉🎉🎉

Oh, I thought this was how to make a Dead Island/Dying Light fire weapon mod, close enough I suppose.

@tipsintelligent2605

2 ай бұрын

Thanks bro

‏‪👍👍👍

Super Glue!

@tipsintelligent2605

5 ай бұрын

Ok man

Hadir mas Bro..👍👍👍❤️

@tipsintelligent2605

10 ай бұрын

Thanks man

Luar biasa

@tipsintelligent2605

11 ай бұрын

Thanks man

❤

cool

@tipsintelligent2605

8 ай бұрын

Thanks bro

Я думаю такую пластмассу можно заклеить встык при помощи дихлорэтана (01:28) 😉👍🏻

@tipsintelligent2605

2 ай бұрын

Ok man

Bonjour Quel fer a souder utiliser vous 120w, 150w 300w? Merci

@tipsintelligent2605

11 ай бұрын

Thank you for asking. I use 100w type. I don't think it's strong enough

What kind of soldering pen are you using? Do you have a link?

Bhai ye welding gun kon sa hai

Parabéns pelo talento👍 Mas prefiro comprar outro😶

@tipsintelligent2605

11 ай бұрын

Thanks bro

Cómo Cuánto se cobra por trabajos así?

what kind of metal rod you put inside the solder? any specific kind?

@MA-channel1

6 ай бұрын

It's a normal nail, made of ordinary steel. Iron nail will be good too. In the 1st part the rod was of aluminium

@nineclanculture

6 ай бұрын

@@MA-channel1 is copper better than aluminium or they work the same

I'd say Ytube has enough videos on how to cut/melt/repair plastic. This is no different from the thousands of others

Show !!!!!!!!!

Compre uno nuevo tacaño

@tipsintelligent2605

10 ай бұрын

No

Pipe plane of copper to sustitute the steel heater Greetings plastic welder

La hoja del cutter pierde el tratamiento termico cuando se la calienta mucho y luego se enfria gradualmemte.

@tipsintelligent2605

7 ай бұрын

Thank you, it cuts heat very effectively

Should probably torch the zinc off the nail first, fumes are bad.

@tipsintelligent2605

6 ай бұрын

Thanks bro

u could just use regular glue for the triangle, but ppl likes to be complicated

jeszcze trochę a ten geniusz wynajdzie koło

Brother broken water tank how to weld

@tipsintelligent2605

11 ай бұрын

Thanks bro

Like✔

@tipsintelligent2605

8 ай бұрын

Thanks bro

😎👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🤓

Instead of doing all this headache, best is to buy new plastic item in that much amount 😅

@tipsintelligent2605

10 ай бұрын

Thank you . It's a situational solution

Whats is that tool called you use?

@tipsintelligent2605

6 ай бұрын

Thanks man

@FriedGreenCarrots

6 ай бұрын

@@tipsintelligent2605 thanks man what? O ask you a question

Benar juga! Solder listril tidak memiliki satu fungsi, kita bisa memodifikasi ujung nya dan solder listrik menjadi alat serbaguna

@tipsintelligent2605

6 ай бұрын

Thanks dude

@Fandi.18.089

6 ай бұрын

@@tipsintelligent2605 thanks

Bravo Rússia 🇷🇺🇧🇷 uraaaaaaaa

@tipsintelligent2605

20 күн бұрын

Ok man

He did it his way 🤨🤨

Взял ручку и сломал🤦 одно делает другое ломает, потом будет видео как отремонтировать сломанную ручку. Мастер ломастер😂

@tipsintelligent2605

10 ай бұрын

No

@MA-channel1

6 ай бұрын

Это была сломанная или уже использованная ручка, её только выбросить - а вот пригодилась как запчасть. У меня самого куча таких запчастей - пригодятся возможно.

Чтобы починить что - нибудь ненужное надо потратить уйму времени и сломать много нужных вещей

@MA-channel1

6 ай бұрын

Нет: чтобы чинить что-то мало-нужное самому, если чинить редко - потребуется потратить уйму времени, много хороших инструментов и несколько ненужных вещей. Самое дефицитное: время. 2ое самое дефицитное: инструменты.

What’s the name of this tool

@tipsintelligent2605

8 ай бұрын

Thanks man

@peshmerga7868

8 ай бұрын

@@tipsintelligent2605 what’s the name of the tool?

next video: how to secure the wires of the power strip before it catches fire (0:47)...

@tipsintelligent2605

7 ай бұрын

Ok bro

I read that the fumes from melting plastic are carcinogenic. Shouldn't there be some safety warnings in this video?

@tipsintelligent2605

2 ай бұрын

Thanks bro

@richardho5955

Ай бұрын

Use your commonsense, always…no warnings needed! 🙄

@christiaantober2461

Ай бұрын

@@richardho5955 Thanks bro

Hacks for problems that don't exist

Just buy a new one!

Whats with all the bots?

Easy?

@tipsintelligent2605

8 ай бұрын

Thanks man

It's called melted plastic not welding as you are not using a welder

@donschlenker2956

3 ай бұрын

Definition of welding "join together (metal pieces or parts) by heating the surfaces to the point of melting

@Genesis-007

3 ай бұрын

@@donschlenker2956 Nope, you don't heat 2 metal surfaces and melt them together as welding rods are used to fuse the metal together.

@le-johnny9236

3 ай бұрын

smartest youtube commenter

@loveless3382

3 ай бұрын

@@Genesis-007 explain friction welding

@vytautasdalangauskas7577

3 ай бұрын

It identifies as welding 😆 🤣 😂

What's the point of fixing something by ruining the other

@tipsintelligent2605

Жыл бұрын

Can you tell me more specifically?

@brookelord3448

Жыл бұрын

What was ruined? The nail and the razor can be reused if you have to fix something else. If you don't have a broken wire strainer you can buy wire mesh but for about $1.25 you can buy a wire strainer. All pens eventually run out of ink so use one that's out of ink: use common sense.

@tipsintelligent2605

Жыл бұрын

Thanks bro

@brookelord3448

Жыл бұрын

@tipsintelligent2605 you're welcome. Also, if anyone doesn't have a pen that is out of ink, a lighter that is out of fuel also has a spring under the button and one under the flint (under the spark wheel).

@tipsintelligent2605

Жыл бұрын

Thank you . it's right

S.v.p j'ai le collecteur d'admission fissure

@tipsintelligent2605

Жыл бұрын

Ok man

No way lmao

The metal reinforcement is totally unnecessary, and ugly- there is no need to make the repair stronger than the rest of the piece!

@tipsintelligent2605

11 ай бұрын

Thanks bro

@redpost2380

10 ай бұрын

Seems like you don't understand. Perhaps in time you will appreciate that reinforcement in some form is TOTALLY necessary unless you have pressure mold for the object and make a new one.

Good idea, my under engine plastic guard on my car is cracked, I will try this, thank you

@tipsintelligent2605

10 ай бұрын

Thanks bro

Someone send him super glue

@tipsintelligent2605

8 ай бұрын

Thanks bro

@MP-lb1bv

5 ай бұрын

There are some right angle joints where super glue joint won't work..this is indeed very useful for such selvage

@H.EL-Othemany

3 ай бұрын

@@MP-lb1bv you just have to know what you're doing

@MP-lb1bv

3 ай бұрын

@@H.EL-Othemany lot of people don't .

@user-vx5yg1oq6j

3 ай бұрын

Дихлоретан, попробуйте

Ок!

А эпоксидная смола тебе чем ненравится?

@tipsintelligent2605

Жыл бұрын

thank you, i use it in bigger projects

China's fixing

@tipsintelligent2605

10 ай бұрын

No

"promosm" 🔥

@tipsintelligent2605

11 ай бұрын

Thanks bro