2ZZ Spark Plug Tube Seals and Valve Cover install | Corolla | Celica | Matrix
Автокөліктер мен көлік құралдары
Instagram @gansitoheimperformance
Parts and Stuff I used
Toyota Packing sealant
Multi Purpose Grease
Mahle Spark Plug Tubes
GS33725
PCV Vent Tube Gasket OG Toyota
12255-88600
Valve Cover Gasket OG Toyota
11213-88600
Timing Chain Gasket
11328-88600
Inner water pump gasket OG Toyota
11329-88600
How to change Spark Plugs on a Corolla | 05 XRS | 1ZZ 2ZZ
• How to change Spark Pl...
2ZZ | Corolla | Matrix | Timing Chain Cover Gasket • 2ZZ | Corolla | Matrix...
Taking off the Valve Cover is pretty easy. All you need to do is simply take off a couple of brackets for some vacuum hoses. Follow by Coils and Spark Plugs. Lastly nine 10mil bolts around the valve cover plus a sensor plug in on the back of the block. Painting the Valve Cover was a different story. It honestly didn’t go as intended. I was doing my best to wrinkle finish it. Since it’s not the right kind of product engineered to fit the project, it just simply didn’t come out right. Hopefully next time I’ll get it right or just simply experiment other Valve Covers. As far as the battery relocation. I recommend going to the junkyard and getting a Battery Cable of a vehicle that has a battery located in the trunk. For Example a Volvo. Their heavy gauge, fire proof and definitely will be green to save the environment by recycling and save yourself a few bucks at the end.
Again Thanks Guys. A Thumbs up, Subscription & Share will definitely help me on a long run with my Build and your enjoyment of watching, knowledging and maybe embracing.
Thanks!
Пікірлер: 12
I love the XRS content bro. I just bought mine recently and I learn so much on this car cause of you.
@gansitoheimperformance271
4 жыл бұрын
Hope you enjoy yours for time to come as much I do. Thanks! Their a blast man. It’s been my High School Dream ride and finally got the chance to own it couple years back.
Thank you
Never use a steel hammer 🔨 on aluminium parts use a plastic hammer
Do you know what that’s sensor in the back called? 19:39 mines missing
15:50 you mentioned an o ring. Do you know the size or did you just grab one of those sets with a lot of o rings? Plan on doing this pretty soon on my celica and this video is super helpful!
@gansitoheimperformance271
4 жыл бұрын
I don't... I just randomly grabbed one that fitted there. I wouldnt doubt if the dealership has a part number. Wish you luck on your work! Shouldn't be to bad.
@gansitoheimperformance271
4 жыл бұрын
TOY-96741-19009 Valve Cover oil feed tube Oring. Monkey Wrench Racing has it for $3.09
@fuengo5607
6 ай бұрын
@@gansitoheimperformance271Ty
In my valve cover gasket kit for the 2ZZ I received a 5th rubber seal, a large one but different to the ignition coil seals. Do you know what it could be for?
@gansitoheimperformance271
3 жыл бұрын
I’m trying to think and the only thing somewhat around that area, is the water pump seal somehow getting supplied.
Haha, you wanna have electric problems relocating the battery on the back, don't you?