This is the 3rd video of yours that I have watched. I learned something by you using an old credit card to spread glue. Good ideal. You did a very good job on this cabinet.

@Delatsch

5 жыл бұрын

Thanks! Glad you liked it!

Hello ! thanks to taking time to make this video

@Delatsch

5 жыл бұрын

Hello! Thank you!

perfect teacher

@Delatsch

Жыл бұрын

Thank you!

I also use old CRedit Cards for many uses.....esp for scrapers when cleaning delicate surfaces like furniture, fiberglass showers, and instruments....but I never tried CCs for spreading glue....looks like it works GREAT

@Delatsch

5 жыл бұрын

Yeah, it is really handy and leaves a very uniform thin coat. Plus when it comes to cleaning it (unlike roller or a brush) you just peel the dried glue away and you can reuse the card.

Looks darn nice. Very informative video. thank you.

@Delatsch

2 жыл бұрын

Thank you!

Amazing, thanks for share!

@Delatsch

5 жыл бұрын

Thank you very much!

Question, how did you secure the baffle board to the box? It came out really good!

@Delatsch

5 жыл бұрын

Thanks! Yeah, I didn't film that part, usually I just use several screws like Fender and screw the board to the cleats from the inside of the cabinet.

Where can i get guitar clothe like that sir..

Have you ever tried a 1/4" ply for the baffle board?

@Delatsch

4 жыл бұрын

I don't remember using it, I think 3/8" was the thinnest I've used, but I find 1/2" to be the most practical. Of course it depends on the the size of the speaker(s) as well. If you are planning on using one 10" speaker then it might be ok, but if the you have 2x12 I don't know how it would behave.

that jigsaw cuts is far far above my ability . i just use a little caulk around it then wood screws.

ωραίο

@Delatsch

4 жыл бұрын

Evharisto ;)

How much do you charge per staple? That's just genius 😂 Beautiful build

@Delatsch

3 жыл бұрын

Thank you!

@jamescourt2842

2 жыл бұрын

@@Delatsch I love the video as well build! looks truly awesome I've started putting together my 2x12 guitar cabinet just question I have plunge router an when your marking the hole in in center for jig to fit on. How do you go about measuring an marking that? Thank you so much ☺️👍

@Delatsch

2 жыл бұрын

@@jamescourt2842 I am not sure what you mean exactly. If you mean the round holes for the speaker, check my round hole jig video, it's probably more clear there.

@jamescourt2842

2 жыл бұрын

@@Delatsch yes, that's it! I do apologise for not being very clear I will do yes wonderful thank you so much for replying ☺️.

@Delatsch

2 жыл бұрын

@@jamescourt2842 Make sure to drill a hole in the center exactly as the thickness of a screw you will use and when making a mark on the side of the router bit, make sure that the hole line is just touching the outside of the router bit.

Why do you paint the baffles on the inside?

@Delatsch

4 жыл бұрын

I've made the back out of three separate strips of plywood, so you can remove one or two or all three for an open back cabinet etc. So once the back is off the dull plywood makes the interior really look bad if not painted.

@thehandseesall

4 жыл бұрын

@@Delatsch I see...

Need dimensions

Sir, this black cloth mero should be asked

@Delatsch

5 жыл бұрын

Hi Vaibhav, didn't understand your comment, do you speak English?

You just copied that one guy??