This is an unboxing of the 2jz get lower adapter from dodo racing. www.dodo-racing.com/produkt/2...
Жүктеу.....
Пікірлер: 30
@gurpreetsoomal54086 ай бұрын
I have these parts as well and wanted this VVTI GTE front-facing intake manifold setup for a cleaner look, but the VVTI GE factory side-facing intake manifold in the IS300 and other Lexus models have ACIS (butterfly valve in the intake manifold) that makes more power. Everyone who retains the ACIS shows more power on their builds. So it's a matter of a much cleaner look in exchange for the loss of power.
@alexfrench8142
6 ай бұрын
yes the butterfly gives the advantage of changing the runner length and the longer over the engine intake will always be better as the streamlines for the airflow are very smooth. ffim is for packaging purposes. but if you want more power you can always increase compression, timing, boost, fuel injection angle. Anyone interested in the dodo manifold is not looking for a 1500 hp dyno monster. i really cant stand the side intake just for the fact that maintenance is harder. i want my build to be as easy to fix things as possible. one time i had a misfire and with the side intake you cant unplug an injector to narrow down which cylinder. so i took off the y pipe and made a piece of wood to block the giant holes so i could run it with no throttle plate. the ffim will make it to where i would never have to do that again. youre right. its what ever kind of build you want.
@gurpreetsoomal5408
6 ай бұрын
@@alexfrench8142 I am only aiming for a 300-350hp unopened 5-8psi VVTI GE turbo build. Ahh I know, I think about swapping over to my GTE FFIM setup every other week, but tell myself I need all the power for my low hp turbo build. Lol
@alexfrench8142
6 ай бұрын
@@gurpreetsoomal5408 you will hit that no problem. And safely. But ask, what will you want next?
@aznbrian_ Жыл бұрын
Better choice than the adapter plates that make it hard to close the hoods on the IS and GS.
@alexfrench8142
Жыл бұрын
I agree completely. This will make the GE all the more viable
@Intransversable
11 ай бұрын
Also on the supra.
@paki8000 Жыл бұрын
thanks for the great video 💙
@alexfrench8142
Жыл бұрын
Thank you for the product we all needed this and it’s so great! Everything you have is phenomenal in quality and design
@JayP7676 Жыл бұрын
I would port out those runners to get better airflow as well as the plenum..
@blueprintjdmАй бұрын
Is anyone making nice valve cover replacements for the GE? Something more in the style of the GTE valve covers
@@alexfrench8142 hell yeah man I’ve been wanting to run gte mani I bought one a year ago tried to fit it to my car , fit beautifully but it was like 4-5 inches taller then the head so I ditch the idea but hell yeah would I need the lo pro rail or standard
@alexfrench8142
Жыл бұрын
@@Jessejamesrg4l you have to use a lo pro rail. Dodo sells one too
@notsobad13849 ай бұрын
Can you provide a link?
@alexfrench8142
9 ай бұрын
www.dodo-racing.com
@powerofone1645 Жыл бұрын
Now red line it till it detonates. :)
@Intransversable11 ай бұрын
Pretty expensive for an adapter
@alexfrench8142
11 ай бұрын
Yes. But it’s the only way to fit a gte ffim on an is300
@Christofo Жыл бұрын
Cool product but I think I’d rather just grab an eBay manifold for that price
Пікірлер: 30
I have these parts as well and wanted this VVTI GTE front-facing intake manifold setup for a cleaner look, but the VVTI GE factory side-facing intake manifold in the IS300 and other Lexus models have ACIS (butterfly valve in the intake manifold) that makes more power. Everyone who retains the ACIS shows more power on their builds. So it's a matter of a much cleaner look in exchange for the loss of power.
@alexfrench8142
6 ай бұрын
yes the butterfly gives the advantage of changing the runner length and the longer over the engine intake will always be better as the streamlines for the airflow are very smooth. ffim is for packaging purposes. but if you want more power you can always increase compression, timing, boost, fuel injection angle. Anyone interested in the dodo manifold is not looking for a 1500 hp dyno monster. i really cant stand the side intake just for the fact that maintenance is harder. i want my build to be as easy to fix things as possible. one time i had a misfire and with the side intake you cant unplug an injector to narrow down which cylinder. so i took off the y pipe and made a piece of wood to block the giant holes so i could run it with no throttle plate. the ffim will make it to where i would never have to do that again. youre right. its what ever kind of build you want.
@gurpreetsoomal5408
6 ай бұрын
@@alexfrench8142 I am only aiming for a 300-350hp unopened 5-8psi VVTI GE turbo build. Ahh I know, I think about swapping over to my GTE FFIM setup every other week, but tell myself I need all the power for my low hp turbo build. Lol
@alexfrench8142
6 ай бұрын
@@gurpreetsoomal5408 you will hit that no problem. And safely. But ask, what will you want next?
Better choice than the adapter plates that make it hard to close the hoods on the IS and GS.
@alexfrench8142
Жыл бұрын
I agree completely. This will make the GE all the more viable
@Intransversable
11 ай бұрын
Also on the supra.
thanks for the great video 💙
@alexfrench8142
Жыл бұрын
Thank you for the product we all needed this and it’s so great! Everything you have is phenomenal in quality and design
I would port out those runners to get better airflow as well as the plenum..
Is anyone making nice valve cover replacements for the GE? Something more in the style of the GTE valve covers
@alexfrench8142
Ай бұрын
kzread.info/dash/bejne/pnZsusl_eK-TlcY.htmlsi=myAOSHECg703pWMh
what throttle body is your adapter for
@alexfrench8142
Жыл бұрын
Bosch 74mm PN: 0 280 750 474 adapter is from venom auto for vvti intake www.venomautomotive.com.au/shop/2jz-dbw-vvti-throttle-body-adaptor
Can you use the is300’s throttle body?
@alexfrench8142
Жыл бұрын
You would have to get an adapter. It will not bolt up. Then there would a lot of clearance issues because the is300 is so wide
Does this fit on the is300 with the hood closed?
@alexfrench8142
4 ай бұрын
This was designed from the ground up to specifically fit the is300
How much and where do I get one
@alexfrench8142
Жыл бұрын
500 www.dodo-racing.com/produkt/2jz-get-intake-adapter-kit/
Fit is300??
@alexfrench8142
Жыл бұрын
Designed for it
@Jessejamesrg4l
Жыл бұрын
@@alexfrench8142 hell yeah man I’ve been wanting to run gte mani I bought one a year ago tried to fit it to my car , fit beautifully but it was like 4-5 inches taller then the head so I ditch the idea but hell yeah would I need the lo pro rail or standard
@alexfrench8142
Жыл бұрын
@@Jessejamesrg4l you have to use a lo pro rail. Dodo sells one too
Can you provide a link?
@alexfrench8142
9 ай бұрын
www.dodo-racing.com
Now red line it till it detonates. :)
Pretty expensive for an adapter
@alexfrench8142
11 ай бұрын
Yes. But it’s the only way to fit a gte ffim on an is300
Cool product but I think I’d rather just grab an eBay manifold for that price