21" Snow Blower/Thrower Single Stage from Powersmart Review
Тәжірибелік нұсқаулар және стиль
This snow blower is awesome with model # PSS1210M from Powersmart.
12.5 inches of clearing height, so we have no problem on snow as high as 10 inches.
With auger assist drive with the help of 212 cc gas powered engine and a rubber auger that makes it easy to push, like no effort.
Easy storage as light as 70 lbs and compact design.
You can get it from their website
here is the link:
(Affiliate link)
For model PSS1210M that I have:
bit.ly/3uCyltU
Powersmart website:
bit.ly/3W5YPj7
#powersmart
Shear Bolt & Nuts
amzn.to/3iMBODV
PLEASE SUBSCRIBE TO MY CHANNEL
bit.ly/JUROWorkshop
Cheers!
JURO
Пікірлер: 26
Full watched. Nice snow blower. Just on time for the snow. Greetings from one of your supporters. Have a wonderful day
This was very helpful! Thank you!
I just picked this one up,after 35 years I'm just done with the shovel
Is there anyway you can adjust the scraper height on this machine? I have the same one and it keeps hitting my cement. Thanks.
I use this machine for the first time last night. Runs good, but trying to push it was very difficult. I'm 69 years old and it just wore me out. I thought this machine was auger assist but the auger doesnt touch the ground. It kept geeting hung up on the concrete. Not sure what I need to do to set the auger where it's touching the ground and helps to propel the machine.
Someone needs to show this dude how to remove snow with the snowblower because he’s a feeding his purpose
@TheManchise517
7 ай бұрын
Lol..so true..😃
@ronaldpettifurd5957
5 ай бұрын
Well he's not feeding his purpose
Mine didn’t start this winter. It has gas and oil. What do you suggest?
I have the same snow blower. It's annoying when I push it. it seems to sometimes dig into the pavement and won't move easily. I wish I could adjust the height. Does that ever happen to you?
@juroworkshop
Жыл бұрын
Yes it happen to me too, the steel scrapper worn out easily, I think you need to adjust the height or push it back a little bit. But on mine, i just took it out and it works really good, just like pushing no effort on fresh snow. I will just figure out on summer how to properly install it. I hope it helps. Thanks
No wonder wasn't starting there's a choke and I thought key outward to run
I have it. It's JUNK!
doesn't have skids, have fun trying to push it
good music video bro. crank up da rap, yo
I saw another vid and the guy got rid of the metal part at the bottom
My auger doesn’t spin any advice??
@juroworkshop
Жыл бұрын
hi, if your auger doesn't spin during use, it could be the shear pin or shear bolt is cut or broken already. It is totally normal to protect your auger gearcase from damage. Just replace it with new one, i have a link in my video description, so you will get better look of what shear pin or shear bolt look like. You can google how to replace it. Thanks!
@CynthiaMChicas9
Жыл бұрын
@@juroworkshop first time ever using! Was just running and turned it back on doesn’t spin. Thank you!
@juroworkshop
Жыл бұрын
to check if its really the shear pin, try to spin your auger with the engine off. DON'T start your machine, just spin your auger with your hand or a piece of wood. If it spins freely, meaning your shear pins did its job. Just replace it with new one, and you are ready to go.
I have that same machine and it digs into the cement all the time does not work worth a darn it works okay when it's running on something that always checks up I have a horrible time with this machine I would not recommend it to nobody
That looks noisy and stinky and heavy. Is there no pure electric snow blower available there these days, yet?
what kind of oil did you use? or any oil will do?
@juroworkshop
Жыл бұрын
Hi, i used 0w30 full synthetic oil for 4cycle snowblower. I think the recommended is a 5w30 synthetic oil. You can see it on their manual.
@thattv5890
Жыл бұрын
@@juroworkshop thnk u