Definitely looking forward to the wiring of the car videos. As someone who isn't to that level yet, I'm still wiring my own. Starting on mine in just a couple of weeks. Hopefully I learn a little something from you before I get to mine.

@theholleyefiguy

7 ай бұрын

ive got a ton of videos on wiring, get to watching

awesome info as always Devin! thanks for covering the new control methods and thoughts behind it, in for more info as you dig into it! keep pushing forward sir!

3:22 congratulations you’ve made it to the final fan. It’s a beast. My car NEVER goes over 181 with that fan and not as much airflow direction/diversion of air as you have.

@theholleyefiguy

7 ай бұрын

in testing this thing is a beast, it draws alot of amperage but moves an incredible amount of air according to my annomometer

Helluva transition in the past couple years. Excited to see how that new boost control works for ya.

Looking good man. Can’t wait to see it next sick week.

This is going to be bad ass ride. Always love watching your videos

Wow that is a sick build.

Always Updating, developing, improving and tinkering 👌👌

i learn shit just by listening to you go on rambletrons on podcasts and shit, i can't imagine the knowledge coming with these wiring videos... fuckin eh. thanks for the content.

This is going to be so badass when it hits the track💪🏻💪🏻

The Vert is sweet!!

Such an impressive car. News subscriber 👍👊🇺🇸🤘

I know you said you didn’t like electronic wastgates but did you consider using a dbw throttle body for your bypass valve?

Looks killer

controlling and directing airflow is so often overlooked, then people wonder why their stuff doesnt work.

Goint to be interesting what happens with the new boost control stategies. And se it the turbo rpms gets too high witout wastgates relly interested in seeing the data from that :)

Devin, how well did the straight-gate set up work for you during Sick Week??? Any issues to be aware of? Considering running just a straight gate set up vice wastegates in a new build underway.

I’m surprised you have the turbo inlets so low with the track temperature higher than ambient air tempo you’ll be pulling in hotter air, that’s one problem that prostock had when they went from big forward facing hood scooped to the efi motors with low mount air intakes

@tylerzesiger7648

7 ай бұрын

Gotta keep that weight down low

@danmyers9372

7 ай бұрын

I’m concerned about excess oil to the turbos with them down low like that. Have seen other racers try them down low like this and ended up moving them back up after trying restrictors and even a scavenge pump without success.

Devin, if I could make a suggestion. Thicken up the leading edge of the splitter to 1/2'' the current knife edge will create unwanted turbulence and you may not get the most efficient air forced into your bumper openings. ideally the splitter should also run back under the nose some as well, if possible maybe stop it at the leading edge of your catch pan? This will really clean up the air in front of the car and aid in making downforce.

@theholleyefiguy

7 ай бұрын

the splitter is 3/8th thick everywhere. it goes under the car about 8 inches behind the bumper where it runs into the belly pans

@jasonbrinegar6759

7 ай бұрын

@theholleyefiguy oh okay, nice! Guess I should've paid closer attention to the video. It appeared to be a little thin mold pull lip most companies pass off as a splitter.

So what convinced you to try boost management by BOV? I know Yost was trialing something like this in his Camaro. Excited to see how this turns out.

@theholleyefiguy

7 ай бұрын

uploading a video right now to answer this

Hope you don’t have issues with excess oil in the turbos with them down low like that.

Very surprised to see HPT turbos over FIS/Precision/Comp. You a fan of how light they are or do they hang with the big boys too?

@theholleyefiguy

7 ай бұрын

in my opinion the hpt line up is top shelf. Fis makes badass turbos, i ran their 118 for a long time and sell alot of their turbos to customers, for my application i felt like these were the perfect choice

Can you keep us updated on the fan setup and if it works out for you. Do u plan on selling ur other radiator and fan setup?

@theholleyefiguy

7 ай бұрын

i certainly will. the other rad fan combo is sold

This is cool. Is the straight gate a little rough on the turbo since they don’t really reduce shaft speed or exhaust through the turbine ?

@Turbochargedtwelve

7 ай бұрын

They will reduce shaft speed. More compressor flow demands more power with finite exhaust flow(turbine power) shaft speed will decrease.

@lukk4273

7 ай бұрын

Would this also drive turbine back pressure up at the same time? I could see it being usfull to eliminate compressor surge.

@Turbochargedtwelve

7 ай бұрын

@@lukk4273 drawing more power from the turbine will increase exhaust manifold pressure.

Hi Devin, just a quick question I hope you can answer, I see your alternator is grounded to the cylinder head. I have a MSD alternator, should I be grounding it? Thank you.

@theholleyefiguy

7 ай бұрын

It won’t hurt

@dirtymuleracing5321

7 ай бұрын

@@theholleyefiguythank you

Holy smokes it’s bad, bad, bad mofo!! More videos and tech please.

Is your old rad for sale? And what are the dimensions on it?

@theholleyefiguy

7 ай бұрын

its sold

The front looks sinister without the front-clip and the new turbo location

I'm trying to set up appointment. To get my car wired.

@theholleyefiguy

7 ай бұрын

email devin@hcrinnovations.com or call the shop phone monday at 864-565-5606

What part of South Carolina are you living in?

@michaelmerrill589

7 ай бұрын

I LIVE IN JACKSON S.C. HOME OF HOUSE OF HOOK DRAGWAY.

@theholleyefiguy

7 ай бұрын

greenville sc area

How much would cost me for you to wire a 85 Silverado with Holly x max ls 454 Kong 2650 supercharger 4l80e Holly 12.3 dash have Holly wiring harness ?

@theholleyefiguy

Ай бұрын

Email laura@hcrinnovations.com and we can get you an accurate quote

What headers are you using?

@theholleyefiguy

7 ай бұрын

performance fab built them

love the update on the car, Devin can you do a Holley vs. Haltech Rebel review or comparison? Is it worth it? Thanks!

@theholleyefiguy

7 ай бұрын

when it actually comes out i can

All this skill and talent wasted on a ford that is not a Festiva! Nice work bringing drag and drives up a notch!

@theholleyefiguy

7 ай бұрын

Couldn't agree more!

I'm suprised that a guy who loves electronics and does an amazing job I might add. Is nit in favor of E gates. The control thru the computer is way more precise and you rely zero on air..

@theholleyefiguy

7 ай бұрын

in theory it should be, in practice its not

@dougsmith4513

7 ай бұрын

@@theholleyefiguy how so?

@SloppyMechanics

7 ай бұрын

check out a few videos ago with ryan tuerck's truck that has e gate and motec and very smart people and they abandoned it for a pneumatic. if they had to throw in the towel imagine what those situations can be like for people and professionals not at that level.

@dougsmith4513

7 ай бұрын

@@SloppyMechanics copy, I'll give it a read