You’re one of the very few that have posted a video like this! Thank you!! I just dropped off my 2022 MT-10 for an ECU Flash and to have the shop install the link pipe! She has 909 miles on her almost broken in so I can enjoy her to the limit of my ability!

@RaidenXXII

Жыл бұрын

Thanks I tried my best to help the community. The videos takes me a lot longer to do the job too sometimes take 2 or 3 takes because I had to do things in advance first. Thanks for your compliment and good to know it helped you. This is why I do these things.

@xdrive8860

Жыл бұрын

Where are you getting it flashed?

@RaidenXXII

Жыл бұрын

@@xdrive8860 I don't know yet. I'm getting silly quotes of $1000 for dyno custom tune.

Absolutely brilliant video please keep it up.

Excellent video, thanks for your help! I'm about to install a Leo Vince mid-pipe to my 2022 mt10. Your video is very helpful, thanks

@RaidenXXII

Жыл бұрын

Exciting. I wish I can spend the $$$$ on the leo Vince and SC Project exhaust but I got my link pipe and can for $300 total so can't complain. It's loud and makes the bike run rich. I will film the pops and flames one of these days when down shifting it's amazing.

Your videos are excellent 👍🏽 keep up the great work

@RaidenXXII

Жыл бұрын

Thanks for watching. I hope to make more videos on the near future. You made my day. ❤️

Thank you, I was stuck on how to fit the gasket 😊

Thanks for the 2nd gen info bud! Much appreciated

This is a great video. Helped me a lot. Thanks for doing it.

@RaidenXXII

Жыл бұрын

Anytime my purpose is fulfilled if it helped someone.

Very helpful video!

Nice video are you still riding your bike like this with no tune? I just bought a 23 MT 10 and I would like to do the same to mine

Hey mate, im in sydney thinking of doing the exact same mod, How many ks you done on bike simce doing this ? Have you had any problems i should look out for, picked up my 2022 mt last week Cool chanel too

Did you need to use exhaust gaskets or was a snug fit

Somebody probably already mentioned it but make sure you have that ecu flashed accordingly. They run extremely lean when you get them breathing properly with an exhaust.

@ryanmurray9017

Жыл бұрын

If it's lean, how do you explain the flames out the exhaust?

@dg8062

Жыл бұрын

I'm sure it's fine......just send it like it is😅🤣😂

@lopezdad30

Жыл бұрын

@@ryanmurray9017 When a brand-new exhaust or link pipe is installed, they always shoot out flames. I think there is some kind of chemical coating inside that needs to be burned off.

@RaidenXXII

Жыл бұрын

Several months in and I'm still getting a lot of pops and flames. I get complaints from my biker mates when they ride behind me it smell of fuel so definitely not running lean.

Перед запуском забыли очистить трубу от отпечатков пальцев. Теперь они с вами навсегда)

Excellent vid mate! Well done. Guessing you're from Aus? What city? any issue with not running a Cat on ya bike? (im kinda stressed about that but really wanna hear that engine!

@RaidenXXII

Жыл бұрын

I'm in Perth, WA. No issues running no cat and can with Mr Plod. It's loud, but not as loud as SC Project. It also has healthy amount of pops and flames on down shift.

@RaidenXXII

Жыл бұрын

You'll still hear the engine, but once you're going 110kmph or above 😉 you'll just hear the exhaust and wind noise. I got a HJC RPHA11 RPHA10 helmets and they're noisy helmets.

@dotaleet

10 ай бұрын

Cheers for the info mate.

Did you do anything to your headers or did they go that blue from just riding?i pick up my bike next week and they look pretty shitty atm

@RaidenXXII

Жыл бұрын

They just went blue from normal ridding. I haven't touched the headers. I do ride it hard maybe heat turned it blue.

Great video! No ECU flash required? Do you lose any bottom/mid torque?

@RaidenXXII

Жыл бұрын

Thanks. No I didn't loose and low to mids. It still got planty of power. After about 3000km the quickshifter go smoother.

@scottwang16

Жыл бұрын

@@RaidenXXII No ECU flash required?

@RaidenXXII

Жыл бұрын

@@scottwang16 ecu flash isn't required but if you want extra power and remove the throttle restriction you should ecu flash it.

@xdrive8860

Жыл бұрын

​@@scottwang16 ECU Flash is absolutely required after doing a decat on these bikes they will run way too lean and end up damaging your motor.

@scottwang16

Жыл бұрын

@@xdrive8860 Good to know, thanks!

How is your bike running without an ECU flash? I’m concerned about mine and don’t know if I want to risk something going wrong. How’re things looking for you??

@RaidenXXII

Жыл бұрын

It's still running rich. I don't have a plan to flash the ecu as it will cost another $1000. In fact my fuel consumption dropped from 9.4L/100km to about 8.4L/100km in Mode A and I don't baby it. If I am babying it or taking it easy in Mode C I get 5.4L/100km. There are some pop when I'm decelerating and when I'm ridding it hard flames will come out of it.

@JD_ON2

Жыл бұрын

How do you know its running rich .. bikes are lean from dealer .....

Bom, se um dia eu tiver uma nave dessa já sei trocar o escapamento 😂

well done! 5/5 👌 what model link pipe that is and where i can buy it ?

@karis.1845

Жыл бұрын

foundt it already 🙂

@therook7831

Жыл бұрын

@@karis.1845 where did you find it?

@RaidenXXII

Жыл бұрын

www.ebay.com.au/itm/162502723806 Like mentioned I bought this from a mate who got it from this ebay store. The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.

hi! you know if is the same delete cat of the model 2019 ? is compatible?

@RaidenXXII

Жыл бұрын

It is the same link pipe as the 2019 MT10 which is Gen 1. It does fit but you will need to force up the muffler by about 10mm up.

What an insane improvement! I assume you had to get a tune after this right?

@RaidenXXII

Жыл бұрын

No I didn't get a tune. It didn't suffer from low to mid flat spot like in Gen 1 does after the link pipe upgrade.

@corbinroberts949

Жыл бұрын

@@RaidenXXII that's surprising after a whole decat! Thanks for the reply, I'm buying one in black this week. Love yamaha

@Litehamer

Жыл бұрын

@@corbinroberts949 did you get one ?

@corbinroberts949

Жыл бұрын

@Litehamer yes! In black just like I wanted. So far, I've only swapped out the silencer for a Radiant GP shorty exhaust and left the breadbox as is. Sounds pretty good for only 60 bucks spent, and no tune needed.

@lopezdad30

Жыл бұрын

@@RaidenXXII I would highly recommend that you still get a tune or at least an ECU flash. You may not feel any difference or flat spots but 9 times out of 10 a decat/link pipe will dramatically change the air/fuel ratio.

Hi buddy . What mirrors are you using ??

@RaidenXXII

Жыл бұрын

See my other video on barend mirrors.

Ti segnala qualche errore rimuovendo i cavi della valvola di scarico?

@RaidenXXII

Жыл бұрын

No, I left the servo motor connected. You can get sero motor delete or flash the ecu with woodlich tune and turn it off.

Is ECU flashed required?

@lopezdad30

Жыл бұрын

It is if you want your bike running in good conditions.

@RaidenXXII

Жыл бұрын

You can tune it to get more power and stop the pops and flames and remove the 80% restriction but I still haven't tuned it.

Hey Where did you order the link pipe ?

@RaidenXXII

Жыл бұрын

Look in my description. The ebay listings are provided.

Che marca è il porta targa? Link?

@RaidenXXII

Жыл бұрын

See my videos on Tail Tidy.

What model is it?

@RaidenXXII

Жыл бұрын

www.ebay.com.au/itm/162502723806 Like mentioned I bought this from a mate who got it from this ebay store. The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.

Not worth the price now 😏 Where are the bar end mirrors from?

@RaidenXXII

Жыл бұрын

www.ebay.com.au/itm/162502723806 Like mentioned I bought this from a mate who got it from this ebay store. The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.

@motorcyclemichael2182

Жыл бұрын

@@RaidenXXII that’s a better price 👍🏻 Now what about those bar end mirrors…which brand?

@RaidenXXII

Жыл бұрын

@@motorcyclemichael2182 AU $32.76 25%OFF | 2pcs/lot Motorcycle Rearview Mirrors CNC Motorcycle Bar End Black Rearview Side Mirror For Triumph Speed Triple Accessories a.aliexpress.com/_mKE3PMC

Link?

@RaidenXXII

Жыл бұрын

www.ebay.com.au/itm/162502723806 Like mentioned I bought this from a mate who got it from this ebay store. The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.

Stock muffler sucks on a decat, couldn't stand it. 300 mm Black Widow muffler with link pipe made the decat sweeet

Can I mount without remapping?

@RaidenXXII

Жыл бұрын

Yes you can.