I didn't know that Leo Vince did link pipes! That's a good way to cut cost by not installing a full system but get the sound that you're looking for! Great video man! Thanks!

@66Moto

10 ай бұрын

Ya it’s a really great 3/4 system. Way cheaper then doing a full system. Yamaha doesn’t weld the CAT and muffler to the header like other manufacturers. Ya it produces a really nice sound. It’s not over powering. Thanks man. 👍🏻🏍️

@Yii00T

9 ай бұрын

There are many many more than Leo as well. Also Ali Express systems and link pipes also amazing

@Yii00T

9 ай бұрын

Also these bikes have titanium headers so you shouldn't really need a full system when they have made is so easy to split from the cat back.

Thank you for taking the time to put this video together! I'll be installing the same mid pipe on my new MT10 SP 😁

@66Moto

3 ай бұрын

No problem at all hope it helped. Nice 👍🏻 enjoy the SP. The MT10 are awesome and the SP just kicks it up a notch.

@dougiequick1

2 ай бұрын

did you do it? I understand 2022+ is slightly different I want to find out what the difference is as many manufactures stop ar 21

Great detailed video - thanks for taking the time and trouble 👍

@66Moto

2 ай бұрын

No problem at all. Glad you like it.

Sounds great ! Thank you ! Interesting to watch, from an aesthetic point of view, I think I’d have put the silencer clamp so that the screw was on the other side of the pipe, out of sight would look better. A terrific bike, too. Keep up the good work.

@66Moto

9 ай бұрын

Thank you. It definitely sounds amazing. Not over powering for the ear holes lol. Yes yes it would definitely look good with the bolt more hidden. It’s definitely a great bike just needs a tune now to wake it up a little. Thank you.

I had to take BOTH aluminum block brackets off my 23 before there was enough play to remove the cat....the second one is bolted to the bottom rear of motor and is a BIATCH with the cat on to get the screws out! The cat absolutely was NOT coming off until those brackets were out

Thanks for the video. Helped me put my Leo Vince exhaust on my Mt10 Did you tune you bike? If so what time did you use?

@66Moto

11 ай бұрын

No problem. I am really glad it help you to install your exhaust. The bike sound so much better over stock. No I haven’t tuned the bike just yet. I’m think of sending my ecu to Vcyclenut. I notice he has a video of him doing testing with the same link pipe and stock silencer. If I don’t do that I’ll be taking my bike in next spring to a local tuner to get flashed and custom map. To my surprise the bike actually runs okay with out a tune. I’ve definitely noticed a reduction in power in the lower rpm. I would still definitely get a tune because it’s most likely running lean and that’s no good for a engine. Ride safe brother 🤙🏻

Thanks man, I appreciate your time and effort into this video. I'm going to do the same on my '22. So, removing the two EXUP cables is no big deal? Why are people buying a servo buddy? Cruise control still works, & no check engine light? Thanks brotha

@66Moto

Ай бұрын

No problem man. Glad it helped. Nice man you will like it. Ya removing the EXUP valve is no issue. Just remove the cable that run from the motor under the seat to the valve. You will need to keep the motor plugged in or you will lose you cruse control function. No problem brother

Love the details but too much repetition of the same sequence and but a fan of how you show the actual steps as you do them. Awesome sound

@66Moto

15 күн бұрын

Thank you. Glad you are enjoying the detail and the video. Appreciate the feedback.

Did you ever get your bike tuned and who did you go for? Was wondering also how long you ran the bike without a tune and how did it run? Using your video to install the same exhaust on my 22 MT10 :) Thank you!

@66Moto

4 ай бұрын

Hey. I haven’t got the bike tuned just yet. I’m thinking that I’m going to send my ECU to Two Wheel Dyno Works. They seem to have the best one and are the most knowledgeable about them. VCyclenut would also be a good option. The bike runs like shit with exhaust added and no tune. Loss of power down low and twitchy throttle. Hope the video helped.

@rencel3664

4 ай бұрын

Your video helped a lot. Got the pipe in. I haven't decided yet who to use for the ECU tuning. How many miles have you ridden now with the decat without a tune?@@66Moto

@DorDor400

4 ай бұрын

@@rencel3664I did 2 wheel dyno and the bike is COMPLETELY different now it’s wild!! And runs sooo smooth. But it’s an absolute machine now. Strong recommend the guys at 2 wheel.

Hello, im gonna buy this silencer for my R1 but my supresor is Mivv, it will be any fixing problem ? Also the spring is 100% necessary cuz I can’t put it on my supressor

@66Moto

11 ай бұрын

Hey there. I’m not 100 percent sure how the fitment will be with the Mivv supresor. I would check out the diameter of the Mivv pipe and the diameter of the Leo Slip on to make sure it will slip on. Also if the Leo slip on has the clamp with it then it should be tight enough to hold. Before I put the spring on it was really secure with out spring.

How is the bike sound cruising on the highway? Is it too loud? I had to replace the SC project on my 09 because it was too damn loud

@66Moto

9 ай бұрын

It’s no to to bad. After a long ride I definitely feel like I need ear plugs. I’ve been beside people with SC projects on highway and it no where near as loud.

Hey , what if the cables remain in servo motor after I changed the exhaust ? Any harm ?

@66Moto

2 ай бұрын

Hey. I would just remove them completely. Eliminates the risk of the slipping out and ending up in your rear rim. They are long. They are easy to get out of the servo motor housing.

Nice Vid! Does it actually harm the engine when you dont put a remap on ? I thought about getting the link pipe but here in germany we have very strict emission rules and we have to bring all kinds of vehicles to the TÜV (Technical Supervisory Association)every two years, were the emissions are measured. So my plan was to put the OEM silencer back on when I need to go the TÜV. A remap probably would increase the emissions and let me fail der instruction.

@66Moto

10 ай бұрын

Thank you. Long term running bike without aftermarket exhaust and no tune could potentially damage the engine. When you put exhaust on it make the bike run lean. If it runs lean it heats everything up like the spark plugs, valves, pistons ext. You could always put stock exhaust back on for your Tech inspection. I’m not sure it would make it fail emissions because most tunes get it close to proper AFR anyway. Plus with the cat being back on it would filter out and un burnt gas.

@ichbinnichthier347

10 ай бұрын

@@66Moto thank you I assumed that. Life here for bike guys is really tough. Some cops would confiscate the bike and give you 1000€ ticket if you would ride straight pipe. At least we have the Autobahn were we can push the shit out of our bikes

@66Moto

10 ай бұрын

Ya we get loud exhaust tickets here to. They only really give you trouble if you being a idiot like Revving. Would love to have a autobahn haha.

@nac5000

8 ай бұрын

watched a video and it loses 5hp without a tune 😢

@66Moto

8 ай бұрын

I would definitely say it does. It runs like crap currently. We’ll have it all tuned up for next season.

Which legal slip on (not Fullsystem) can you recommend? Loud and pops

@66Moto

10 ай бұрын

You could get the Leo slip on. If you just do a slip on your not going to get pop or very loud. 3/4 system will give you sound.

@Capsulecorp01

10 ай бұрын

@@66Moto what do you mean bei 3/4? Cat ?

@66Moto

10 ай бұрын

@Capsulecorp01 Some systems are 3/4 system that take of the Cat/Muffler on the MT10 it uses the stock headers. Or you can get full system that come with the headers and the silencer. CAT stands for catalytic converter.

Do you need dyno after that? I will run lean no?

@66Moto

15 күн бұрын

Yes definitely will need a tune. After I installed the exhaust the bike ran like crap but that was to be expected. The MT10 has an open and closed loop system. From idle up to rough 5000 rpm it used the O2 sensor to adjust fuel and the switches over to pre written map. So in low RPM the bike was running really rich and I lost all power down low it smelled like I had a gas station was following me around haha, and in the high RPM the bike was leaning out and not getting enough fuel. It’s okay for a little while but you definitely doing damage to the engine if you don’t get a tune. Some people say you don’t have to but I completely disagree with that.

What model y pipe? 8082?

@66Moto

10 ай бұрын

This is the one I got www.leovince.com/en-us/product/1812-0403-cat-eliminator-link-pipe-yamaha-mt-10-fz-10-sp-2022-2023-2

What was the weight difference in the end?.

@66Moto

9 ай бұрын

I will weight the stock muffler for ya. It’s definitely heavy.

@Yii00T

9 ай бұрын

@@66Moto thanks mate.

Did u tune the bike with the new LV system

@66Moto

8 ай бұрын

No I haven’t tuned it yet. It definitely needs it. Bike runs like shit now. That’s was to be expected though after putting the system on. I’m going to be sending my ECU in over the winter, or I might get a local tuning shop to do it in the spring. Haven’t fully decided yet. A friend of mine has the same bike and had good success with a mail in ECU tune.

@cheddablk

8 ай бұрын

@@66Moto Ok this one shop by my house wants to change me like 1100 dose that sound about right

@66Moto

8 ай бұрын

The place I’ve been thinking of going is going to charge me $850.00 CAD for a flash and tune. I have found that all the places I have talked to give me a different price. I guess just their shop rate. They are most likely going to use Woolich or FT ECU. I would stay away from power commanders I had one on 2019 MT10 and highly disliked it.

23:11 could have slid the clamps over the headers as well mate🤙🏻🤙🏻

@66Moto

9 ай бұрын

That definitely would have been a good option as well 🤙🏻

does it backfire?

@66Moto

4 ай бұрын

Yes it does a little bit.

💯 % needs a tune I've seen these from factory on the dyno the mix ain't pretty. Don't ride it much at all without a tune.

@66Moto

9 ай бұрын

Will definitely be getting a tune on it. It’s definitely lost power down low and can tell it’s running lean. Choppy throttle, even more so now. Was thinking of rapid bike for it as it has done wonders on my girlfriends street triple.

@Yii00T

9 ай бұрын

@66Moto rolling tune or flashed?. Normally these make some power low doen then lose it up higher after an exhaust. Wonder what the weight saving is. Yet to see a video.

@Yii00T

9 ай бұрын

@@66Moto if I was in the state's I'd get a Moore mafia tune for sure.

@66Moto

9 ай бұрын

Ya Moore Mafia, VCyclenut, or 2WDW work all seem like they would be a good place to send my ECU in. I’ll definitely weigh the old exhaust and see what it was and post back to you.

@Yii00T

9 ай бұрын

@66Moto sweet I'd love yo know the weight difference. Don't think Chris did it on Moore mafia page. I'm looking forward to getting a newer MT10 maybe even a SP