GM: Let's spray uncorrectable soft black paint on our new Camaro Sandro: hold my Ceramic Coating

No other car color looks perfect like a well detailed black.

@rcbikelife4956

3 жыл бұрын

Facts

@joel9873

3 жыл бұрын

And no worse color to take care of then Black

@rcbikelife4956

3 жыл бұрын

@@joel9873 facts 🤣🤣🤣🤣🤣

@itsathejoey

2 жыл бұрын

@@joel9873 Yea but if a black car is ceramic coated it is much easier to deal with. My 2014 Camaro SS is black and has Shine Supply Beadlock Pro ceramic coating applied to it.

Absolute legend. That was such a satisfying conclusion to such an unsatisfying initial reveal of that car. The ending song was very fitting, because you indeed did, turn that car around.

Sandro...no lie, you're one of the best detailer in the world !! you take this car from trash paint to amazing paint !

This has to be the best detailing channel on YT. Great camera work, use of music, and technique. After watching you work I would trust you with any car... wish I had the inside knowledge on someone near me.

S, I've been binge watching you videos and I don't think I've seen another U tuber detailer that cares so much about the quality of their work than you. You're work is incredible.

@CarCraftAutoDetailing

2 жыл бұрын

Really glad you’ve been enjoying them, thanks!

Your films are beautifully filmed, edited, narrated and are educational to boot! They're also the most relaxing educational content I've seen - a great substitute for Zanax! So many dimensions of artistry here it's hard to quantify. Amazing work!

Wow, I’m blown away that looks brand new!!! Even better than off the show room floor

Someone who really takes pride in his work👍🏾,,, need more like ya....

Sandro...you sir are genius!! to go from that dumpster fire you started with, to this absolute gem, just...wow...wow, wow, wow!

spent years 18-21 working in a GM paint and body shop back in the day when the majority of what was done was lacquer. 50% percent of my time was buffing.....all we had was wool buffing pads....thick orange past compound....liquid compound.....and we use cornstarch when we needed a really fine polish................when i first seen that camaro, i thought.............OMG LOOK AT ALL THOSE BODY LINES AND SMALL ANGLED SURFACES........for no amount of money could i do what he just did...........no where near the patience anymore..............but that is some great work there brother.............BRAVO.

Bro you need to go world wide w this . You are a master @ your craft

You truly are a master of your craft, mate. You are an inspiration to us.

The difference from start (Video 1) to finish is chalk and cheese, and almost puts a tear to my eye, how beautiful it is after the treatment you did to it. It is a testament to your care, attention to detail, and unending patience in tending to the horrendous original state of this car's paint. Wow.... just wow!!!

Dislikes from dealership or from jelaous Camaro owners who never thought their car can look such amazing and shiny))) Great result Sandro!

your honesty is what the car scene needs... to many customers getting told that it last 10 year or even lifetime...

Sandro, that turned out beautiful. Props to you for your patience!

So I think I already commented on one of the other parts but had to come back here and sing your praises. I just bought this same car in the same color (2018 metallic black, 15k miles) and i bought the car remotely. The car showed up with a significant amount of swirl marks and scratches, maybe not quite as bad as this one but similar. I went back to this video series and watched it again. I ordered some of the recommended products and went to work. I am a semi experienced detailer, but nowhere near your skill level but it still turned out amazing! THANK YOU!!!

@CarCraftAutoDetailing

3 жыл бұрын

That’s really fantastic to hear, and well done as it’s definitely not the easiest paint to correct!

@digitalgulby

3 жыл бұрын

@@CarCraftAutoDetailing it was definitely challenging and I am quite certain mine didn’t come out as pristine as yours did, but still quite happy with the results.

Your criminally underrated man

Soo True!! did a 2020 Camaro ZL1 and a Corvette 2020 and its all the same soft paint !!! I Feel your pain!!!!

All I can say is wow that was beautiful you are an underrated channel your editing style and music made the video so satisfying and awesome to watch will definitely come back for more. I would love to be able to detail that way it’s so amazing love the work you do!

This channel is very underrated... excellent work on the paint dude. 👍👍👌

Sandro, mate you're an absolute Jedi at your trade, bet this job nearly took you to the dark side.

@CarCraftAutoDetailing

3 жыл бұрын

Lol nearly!

Absolutely amazing results. Bravo sir. As a detailer myself in las vegas NV I can say I have done several zl1 camaros and none of them had paint that poor or soft. This is most likely due to the car being made in Australia and possibly not the same paint or painting process Gm uses in the USA. Also I have measured thicker paint on the zl1 model compared to the SS I believe there is a difference possibly in the clear coat used on zl1 models vs the SS. I haven't done any lower model camaros so don't those measurements to compare.

@alexclark965

3 жыл бұрын

Unfortunatley we don't make any cars here in Aus, that Camaro came from the US and they get converted to right hand drive here by HSV

@andrewbrack77

3 жыл бұрын

@@alexclark965 I stand corrected. Very strange regarding how damaged the paint was and how soft compared to cars I have done.

This is incredible, watched the whole series and very very impressed with your work. I’m in the process of finding a zl1 and wish I lived in Australia to have you correct and coat it.

Your work and your knowledge is stunning. It is a treat every time there is a new vid. it is just so incredibly genereous of you to share all of this with us.

Your devotion to your creft is spectacular ! It was relaxing to watch your 3 vids. Thank you.

What an awesome job, Sandro. You are truly a master at your trade. The Camaro ZL1 is my dream car and will someday buy one, but definitely not a black one. But your tips and techniques will truly help me with mine. I've learned a lot from your videos and plan to, one day, get myself trained in polishing, or at least get better at it.

That song with the beautiful paint. That’s the quality content I needed. I have to buy a shirt from you now

One of my first times watching, so I couldn't help but notice that intro is fireee

Fantastic work, Sandro.👍 The depth of gloss in the finished shots is amazing, it really accentuates the beautiful lines and shape of the car. 😎 Thanks for taking the time to make and upload this series of videos, I have thoughly enjoyed them. It is very interesting to hear your thought process that leads you on, to deciding your course of action.👍

Maestro: As always, this job is outstanding!!!. Greetings from Monterrey, México

Always a pleasure to watch & learn from you. Love the final reveal. Music fits perfectly. 👌🏻

Watching you work is like meditation for the soul. Amazing work!!

After watching a number of detailing videos on KZread, i must say your work is truly amazing. So glad we have such a great detailer such as yourself in Aus, keep up the good work!

Nothing ceramic spray coating can replace this job e these professional products. It's fantastic, and your job is wonderful, I love your masterpieces everything

I have no words, just sit there and admire, perfect job as always.👌👌👌

Rescued another black beast . So satisfying to watch as always . Great work keep it up

looks awesome as always bro and honestly the most informative detailing youtube channel

I owned a 2018 ZL1, in basically the exact same setup... and this paint was exactly as the video shows you... it was a royal PITA across the board... but when it was done up pretty, man the car was beautiful to look at....

Subscribed since the first part and so far I’m not disappointed by your work

Amazing work Sandro and thank you for being so honest throughout this process, we detailers are not perfect and only do the best we can. I can understand the emotional journey of a 50 hour machine polish session though the worst I've had to do took 30 hours and it was a HSV W427 that had been waterless washed poorly it's whole life .. luckily Holdens paint isn't troublesome. I always enjoy watching your videos.

@CarCraftAutoDetailing

3 жыл бұрын

I appreciate that mate and it’s hard to always communicate and cover everything I should in these videos but I’ll keep on trying to make these videos better and more informative as I go!

I just found your channel yesterday and have been waiting for this 3rd video! It looks incredible man.

Proof! You can polish a turd! Great job!

A very impressive turnaround. This has been a great three parter. Thanks for the videos, and fantastic work as always.

Perfection from Sandro as always. What helped me the most as an aspiring detailer was your advice on doing a coating " first section wipe of light pressure wipe within the coated area second wipe off extend to blend in" out of all the videos I have watched you are the first person I have heard say that. Now I have the confidence to try a ceramic coating Thank u Sandro

@CarCraftAutoDetailing

3 жыл бұрын

Thanks mate and hope it helps you out!

So satisfying to watch, thank you

Awesome work as usual Sergio! Looks dripping and amazing! 🤘🔥

No words Sandro. I'm just admiring.

Absolutely beautiful mate, it's a credit to you on your skill level and your attention to detail. Can't wait for the next one.

Amazing work Sandro! That car looks like it just got a fresh paint job.

What an awesome set of videos; I really appreciate it as someone who daily drives a black car. Thanks!

You're a true artist sir, thank you for sharing your work

Great job Sandro. You are a true pro. The car looked dripping wet out in the sun.

Looks amazing 🤩 like always love to see how you change car look 😇

Incredible result, well done.

Great series! Excellent work!

Now, that is how it should look when driven off the showroom floor. As always, great work Sandro.

The whole series was awesome, great job you did

Well Done ... Stunning Work as Usual .. I recently had a brand new Jeep trackhawk brand new with very similar issues...my PTG showed every panel repainted

Beautiful work Sandro. Delivered the way it should have been originally, through your deft touch. 👏👍

It’s mad that you can get a buzz just from looking at a shiny car. Well done Sandro

Hey Sandro, thanks for that video series. Really good watch and great end result. Bizarrely enough, I've recently seen a very similar problem - huge paint thickness readings but damn near impossible to work on ultra soft paint. In not saying its the exact same issue as here, but it is possible! It was a brand new Ferarri F8 Tributo. Paint depth readings all over the car in the 200 to 300+ range. It took major investigation, including a technician from Ferarri in Italy flying over, to figure out exactly what the hell was going on with it. He did a lot of back tracking of the cars build process and it turns out that, after the final clear coat stage in the factory, it had been failed by quality control because there was an issue with the shipment of clear coat they had been sent in that it wasn't bonding properly to the paint. So, apparently the clear was sanded off all over the car and it went back through the paint cycle again. The technician reckons thats what explains the huge thickness readings and the really difficult and touchy finish - its basically had two layers of base paint and then three layers of clear on top. Needless to say Ferarri took the car back to Maranello and replaced it with a brand new one. Which is good, because a sneeze in the wrong direction would have made the car look like it had been washed with a sponge dipped in a puddle!

@CarCraftAutoDetailing

3 жыл бұрын

Definitely sounds like it could be a similar situation, thanks for sharing that!

Very nicely done! Would be nice to see a before and after at the end

Another top class video Sandro thanks for all the tips brother

Absolutely amazing outcome.

Turned out amazing , another masterpiece! Glass and wet look are crazy, I can’t believe that’s the same car from the first video

Mate you've done an awesome job on that Camaro

Love the dedication. Good job.

Outstanding mate! 😎🤙🏽

Outstanding Sandro.

Dayumm!!!!! That looks ridonkulous!!! 😆 i have to say i cannot stand seeing the red or orange side markers on camaros or corvettes. You can get the blacked out markers for under $150 us. Seeing your vids takes me back to that feeling after spending a good 3 hrs detailing my old camaro. I fortunately had some great detailers work on mine. I used ceramic pro premier. Such great products. Great work my friend!!! 💪😎

Amazing Sandro, i switched to Nova Evo ceramic coating cause of you and its amazing on my soft paint.

Amazing work. I love all the 3 parts on this video car looks amazing well done

As always, Great Work

You did a wonderful job on that ZL1. Beautiful car😁

Damn it doesn’t look like the same car. Great job bro you should be really proud of how it turned out.

Great job! I believe you had a few nightmares with this job! I had one similar, and was a challenge to just don't freaking out with that. I recognize you had a difficult work and I know how stressful it is. Compliments from this side!

Oh wait did he go to Chicago auto pros because that's what they did to me. They said they paint corrected then ceramic coated my zl1 with swirls in it. Then to top it off went through my trunk and just left all my stuff floating about. They never coated my rims and definitely didn't do under my spoiler. I went to them because they were the most expensive and boy did I get screwed.

Bro, you are the best detailer I ever seen, Greetings from houston tx

I was waiting for this .... now can’t wait for the next one

Bloody immense effort!

The question i have is "Will" you ever do another 2020 Camaro Keep up the great content number 1 Australian detailer 👌

@CarCraftAutoDetailing

3 жыл бұрын

Once I have time to recover from this one ... maybe lol

Wow! Amazing work.

You’re honesty very skilled

Looks awesome and you really did a spectacular job on this beautiful vehicle 💎✊

Holden were in constant arguments with GM about the paint quality and door gap on the VE/VF. They won in the end and I’m so glad they did. VE was nominated for worldwide Car of the Year. Seems like quality plummeted hard after Holden shut down. Listen to Sandro and preserve your Holdens - they’ll never come round again.

Stunning. Well done Sandro. The yanks would be frothing over this

WOW! Great work

YOU INSPIRE ME! That’s all😌 Have a great rest of the week mate! #TheBestDetailerPeriod

Picture perfect ..Sandro the detailing wizard 👍

its GM, I'm not surprised on the quality of paint. Beautiful ceramic coating job tho.

Fantastic work!!

Insane Results Sandro~!!! that thing was Trashed to the point of no Return ~! Congrats, hard project to complete and filming at the same time! ;-)

That is one stunning car, made to look so much better by you sir.

Great Job Man !

Awesome job👍

Sandro you deserve a medal for that one. I am betting its the same shit clear that I have on my 2018 Chevy Bolt EV. If I sneeze 5 feet away it puts a swirl in it.. I can't stand it, I am slowly losing my mind. I had to get black because it was the only one available at the time. I so hate black paint..

@CarCraftAutoDetailing

3 жыл бұрын

Lol, black is a love hate paint for me, but if I knew o was getter THIS black paint I would run!

I know people who think a ceramic coating protects against stone chips. I have it because of the boost in gloss and the easier washing. Of course hand washing only. If you don't want to hand wash your car, don't get a ceramic coating.

So it has soft flat black paint with some panels with metallic flake in it? C'mon GM 🙄😒 Excellent work as always 🔥

@devilsreject5343

3 жыл бұрын

They have two blacks, one with metallic flake, one without...

@ekimandersom4478

3 жыл бұрын

It is GM , what you expect