*TOOLS & SUPPLIES & DONATION LINKS* 0W-20 Full Synthetic Oil 5 Qts- amzn.to/2mS9HFM Mobil 1 Oil Filter M1-110A- amzn.to/2kUaDZP Alternative WIX Oil Filter- amzn.to/2n0KlFZ 170 Piece Mechanics Tool Set- amzn.to/2xoyu5c Car Ramps- amzn.to/2x668zQ Oil Drain Pan- amzn.to/2wzrVhE Funnel- amzn.to/2wzdf2a Oil Filter Pliers- amzn.to/2vFLN4b Safety Glasses- amzn.to/2ez41Jw Nitrile Disposable Gloves- amzn.to/2w0dlwc Mechanics Gloves- amzn.to/2w0i1SP *If you Enjoy the Channel Consider Helping Support it by Donating below & by Subscribing.* *PAYPAL DONATION* www.paypal.me/JonnyDIY *Zelle Donation* JonnyDIYs@gmail.com *Venmo Donation* JonnyDIYs@gmail.com Thank You for watching, Subscribe & Click BELL Icon To Enable Notifications for NEW Upcoming Videos, Give a Thumbs up, Leave a Comment or Question, & Share, I'd appreciate it tremendously! :) Remember to Keep on, Doin it Yourself!

@DavidPotter85

3 жыл бұрын

Just a heads up your car ramps link doesn't work anymore, i need to get that and the jacks, if you fix the link within the next couple days I'll be sure to buy through your links!

@JonnyDIY

3 жыл бұрын

@@DavidPotter85 thanks David, just updated the Ramps link👍

Bro keep it up! Lets all just fix our cars so we won’t get scammed by these shops

@JonnyDIY

4 жыл бұрын

thanks yeah it can definitely be discouraging trying to not only find an honest mechanic but one who also knows what he's doing these days

@billsutherland3935

2 жыл бұрын

That’s why I started doing it. Too many shitty experiences with my Honda dealership.

@iishyxvietxboyii1

Жыл бұрын

@@billsutherland3935 Never go to “stealerships.”

@billsutherland3935

Жыл бұрын

@@iishyxvietxboyii1 at one time, they were actually the cheapest place around to get an oil change. Not sure about now.

Tip: Start the engine and run it a few seconds, then shut it down, before checking the oil level. The oil filter is installed empty, once the engine runs and primes the filter, the level in the pan will drop a bit.

You're a Rockstar! Thank you for helping me change my own oil! I was way too excited and proud of myself. Haha.

@JonnyDIY

5 ай бұрын

You're very welcome 🤘 That's awesome, nice job. And you should be proud 👍

Dude you are the Goat! I no longer have to pay other people to change my oil, I did everything like you did on the video ! Definitely subscribing

@JonnyDIY

7 ай бұрын

Awesome, glad I could help you out and save some money too 👍

Hi Jonny,thanks to your video I just did my second engine oil change,always helpful,thanks again,blessings !

@JonnyDIY

2 ай бұрын

Awesome. You're very welcome, happy I could help you out 🙌👍

Just went to the local Firestone in Phoenix az. I now cost $97.00 to change filter and oil Time to invest in a car ramp and chocks Thanks for the video

@JonnyDIY

2 жыл бұрын

You're welcome, happy to help. Yes the price for a synthetic oil change has gone way up. Sometimes local Honda dealerships have specials for around $60-80 too 👍

Thank you. Just spent 30 minutes checking the manual and there is no info in there regarding this. Appreciate the help.

@JonnyDIY

4 жыл бұрын

You're welcome 👍🏻

Right to the point no BS, Loved it and subscribed.

@JonnyDIY

4 жыл бұрын

Thank you! 👍🏻

@justmeandthethree

2 жыл бұрын

I appreciated that also. Too many DIY KZreadrs talk just to hear their own voice.

I can now change the oil on my new Honda Crv 2017!

@liuhongqian

4 жыл бұрын

no. you still can not.... lol

Thanks sir for your big help, now i can change my oil myself. Good job👍✌

@JonnyDIY

2 жыл бұрын

You're welcome, glad I could help 👍

Thank goodness some smart enough to buy the 2.4 and also do a direct easy video on the process. I’m thinking of getting this same model and so my own changes , but wanted to see what it entailed. The cover I do t like , but that’s not a big issue. Thanks

@JonnyDIY

3 жыл бұрын

You're welcome, glad I could help. It's a shame they don't offer the 2.4l on new models unless they're bringing it back for 2022

@Theyralltakenfu

3 жыл бұрын

@@JonnyDIY many others agree with that. Sadly, no way I can afford a 2022 anyway. Haha. Thanks for the reply.

@JonnyDIY

3 жыл бұрын

@@Theyralltakenfu you're welcome

@JonnyDIY

3 жыл бұрын

@@Theyralltakenfu you're welcome

Mmmmm straight to the point, thank you!

@JonnyDIY

3 жыл бұрын

You're welcome! Glad to help 🤙🏼

You need to fill the new filter with oil before installation. Great video

@JonnyDIY

3 жыл бұрын

Thank you Roger 👍

Quick and concise. Great! Thanks for sharing!

@JonnyDIY

3 жыл бұрын

You're welcome, glad I could help you out 👍

Filter on Left Drain on Right and do not DO NOT change any crush washers. Hand tighten both Filter & Drain. Again Do Not change any crush washers. 2015 Honda CRV has the original factory crush washer. I change my own oil and filter and my 2015 CRV never has leaked a drop of oil.

@JonnyDIY

3 ай бұрын

Nice! 👍

Great video, super helpful, can't wait to try it myself! Keep making videos, you're a very good teacher! 👍

@JonnyDIY

2 жыл бұрын

Thank you for your kind words, glad to help! 👍

Thanks for the great video, you know I have never seen such a color on oil coming out of my cars. Except out of Diesel engines after with over 10K miles on it.

@JonnyDIY

4 жыл бұрын

Maybe has to do with the gasoline direct injection system on these cars, paired with such a thin weight oil

Good job - this is straight to the point

@JonnyDIY

3 жыл бұрын

Thank you, glad I could help 👍

Thanks bro. Honda lately is not very diy friendliness!!!

@JonnyDIY

4 жыл бұрын

Yeah it's rather odd. I guess they want service done at Dealers apparently 🤷‍♂️🤦‍♂️

@JonnyDIY

4 жыл бұрын

Ps- you're welcome 🤙

Good video. Hope you will do one on changing the spark plugs in the 2021CR-V turbo. Talking about stupid expensive at the dealer! Subscribed!

@JonnyDIY

2 жыл бұрын

Thanks glad I could help. I wouldn't waste your time or money replacing the plugs for a lonnnng time. The plugs in these cars regularly last 150-200k miles 👍

Very simple and to the point 👍that let us see the full video

@JonnyDIY

Жыл бұрын

Thank you, glad I could help 👍

You do a good job. Like most mechanics, you misunderstand the idea for lubing the oil filter gasket. The gasket needs to slide against the mating surface. Otherwise, it may bind and bunch up while being installed leading to a large leak.

@JonnyDIY

3 жыл бұрын

Yes you're right, it helps it to seat and seal by lubing filter gasket 👍 Also helps with removing the next oil change

@jocozaric8345

Жыл бұрын

Bravo well sad I was thinking of same thing😀😀😀

Hi, I have a 2017 honda crv how do I when my transmission oil need to be changed will you have a video on it???

@JonnyDIY

3 жыл бұрын

Yes I do have a video on that. Here you go 👍 kzread.info/dash/bejne/Z3mHq8mqha-akcY.html

Should I always replace the oil filter every time I change the oil?

@JonnyDIY

10 ай бұрын

I usually do. Only reason wouldn't is if was just all freeway miles then sometimes can just change oil. Or if real short interval oil change 👍

When installing the new oil filter do I need to fill with oil?

@JonnyDIY

3 жыл бұрын

I never do, but some people always do. Some cars you can't do that due to filter placement, but on this car you can. It won't hurt pouring some oil in filter before screwing it on, it just helps your engine get oil and build the pressure a bit faster

@rsalgado29

3 жыл бұрын

@@JonnyDIY thank you Jonny for the quick answer I have to work on my vehicle tomorrow and I never done an oil change am doing this to save some money. Thanks.

@JonnyDIY

3 жыл бұрын

@@rsalgado29 you're welcome, it's not a hard job just take your time. Can always write a checklist of the steps to remember and the tools you'll need. That helps

Hi Jonny, In the video you are using Walmart SuperTech oil, but in your link is Castrol oil, why is that?

@JonnyDIY

5 ай бұрын

Ohh it's just because I couldnt find a supertech one on Amazon. Either of them are good choices. Mobile 1 too is very good, I like them a lot. 👍

Does the cover have to come of to get to the oil filter? Where I take it they use a extractor and I am concerned they are not replacing the filter.

@JonnyDIY

2 жыл бұрын

I believe it needs to come off to access both drain plug and filter. There is a hole in it but its not too big. You can always mark the old filters and check to make sure they're changed 👍

Good presentation. Hoping you didn't put too much pressure when tightening the oil pan drain plug. 33 ft lbs. shouldn't require an "umph" :-)

@JonnyDIY

4 жыл бұрын

Thank you & yes you're right not too much torque. Dealer had it torqued way harder 🤦‍♂️ Hard to get much leverage squeezed under there on a creeper though 🤙

Thanks for posting! This was very helpful.

@JonnyDIY

3 жыл бұрын

You're welcome, glad I could help 👍

This so helpful ,much appreciated !

@JonnyDIY

2 жыл бұрын

You're welcome, glad I could help! 👍

Question: do you think it’s necessary to pre-fill the oil filter before placing it in? I know you wanna coat the seal before putting it back in but just curious. Thanks!

@JonnyDIY

4 жыл бұрын

I never prefill filters, but youre welcome to, doesn't hurt at all. Just gives you oil pressure tiny bit faster. Just be sure not to overfill because sometimes the mounting location is at an angle. Sometimes you cant prefill at all when its mounted sideways 👍🏻

@ericthomas7474

Жыл бұрын

Only pre-fill large diesel filters

just gonna join the several hundred others I assume already mentioned this... PUT OIL IN THE FILTER FIRST!!!

@666FUC6KER666

2 ай бұрын

ok I guess I am the only one saying this... seriously though look it up - you need to add some oil to the new filter before installing it.

@JonnyDIY

2 ай бұрын

Yes you can pre fill filter with oil if you so choose I usually only do that on large oil filter vehicles and trucks that can take a full quart+

Or you can use the B trip meter to tell you how many miles you have to go until next oil change.

@JonnyDIY

2 жыл бұрын

Great idea I always forget about trip B. I usually rip off top of Oil filter box and write mileage on it and throw in glove box too 👍 That way I can pick up filter at store too and know which one

@jocozaric8345

Жыл бұрын

Or better yet keep the note in glove box and record everything you do to your car

HELP:... I have Honda CR V 2017 2.4L with 80,000 miles. I can still put the same 0W-20 oil?.....

@JonnyDIY

Жыл бұрын

Yes, same oil 👍 you can change to "high mileage" 0w-20, just helps keep seals lubricated more

I was debating doing this but after step one I was like no thank you I will pay lmfao

@JonnyDIY

3 жыл бұрын

😂 luckily the dealer doesn't charge too much for the job

@rockysmith6105

3 жыл бұрын

Taking the cover off might be a bit of a pain, but other than making your catalytic converter a sitting duck there isn't a HUGE reason to re-place it. I mean, road salt induced corrosion might be a good second reason to replace it, or maybe if you like to test the AWD... which I don't intend to. However despite the above reasons I'm gonna risk leaving it off for convenience sake... which if you do you can just scratch that first step for all future changes.

thanks

@JonnyDIY

2 жыл бұрын

You're welcome, glad I could help! 👍

Excellent directions... thank you

@JonnyDIY

2 жыл бұрын

You're welcome, glad I was able to help out 👍

Nice video bro. Could you please share a link to where you got your crush washer?

@JonnyDIY

4 жыл бұрын

got a bunch, like 10 pack for few bucks on Rockauto.com

God video Sir, thank you very much. Keep it up. Wade Out..

@JonnyDIY

Жыл бұрын

You're welcome, happy I could help 👍

Is it normal for the oil to be that black when you change it?

@JonnyDIY

Жыл бұрын

Yes, oil will turn black fairly quickly within a few thousand miles 👍

Hi Jonny I lost the first screw you take off the aluminum cover ,do you happen to know besides the 10 mm of the cap what is the size of the thread and the length of the screw ? I will appreciate your response ,thanks !

@JonnyDIY

2 жыл бұрын

No sorry, but if you go to local dealership and go to parts department they will get you that screw for a few dollars 👍 thats easiest way, that or take off another one and bring to hardware store

@adelaferreira4575

2 жыл бұрын

Thanks a lot Jonny ,take care !

Saw a jack also under the car ?

@JonnyDIY

Жыл бұрын

I usually put jackstands under car when it's on ramps for extra safety. They don't fail often, but I have heard of them before. Better safe I figure 👍

at what percentage do you change it at?

@JonnyDIY

Жыл бұрын

I usually recommend between 10 and 20% but I also recommend keeping track of miles 7-10k miles

Thanks a lot ,take care !

Appreciate you sharing your expertise brother. Quick one - if using an extended life filter like mobil1 rated up to 1 year or 20k miles, is swapping filter every oil change necessary?

@JonnyDIY

3 жыл бұрын

No problem, glad to help. If you're putting a lot of road/highway miles I would say yes, but if a lot of city stop and go/short trips I'd suggest changing every oil change. Changing the oil on schedule is most important though.

@Leebrosfishing

3 жыл бұрын

@@JonnyDIY thanks brother!

@jocozaric8345

Жыл бұрын

Yes ! Change oil filter every time you change Oil. 2 times per year ! AT Easter and Thanksgiving if you live in North. Always use best O.F.

You might want to prime the oil filter . Just my 2 cents...

@JonnyDIY

3 жыл бұрын

Yes with this designed oil filter placement you could prime filter somewhat if you like. A lot of modern cars no longer allow you to due to filter placement being sideways

That super tech oil is the shit

@JonnyDIY

3 жыл бұрын

Been using it almost 20 years, never a problem 👍🏻

is it the same for the 2020 hybrid

@JonnyDIY

3 жыл бұрын

I havent done a hybrid, but from what I have read it should be very similar. Consult your manual for oil capacity. I believe it be around 4.5 quarts

What engine is on your Honda CRV, since I have a 2017 Honda CRV 1.5l turbo. I haven’t done an oil change at home

@JonnyDIY

9 ай бұрын

That one had the 2.4l. Same process just different oil amounts taken on each one. I think I mention both oil capacities

@Per-MichaelJarnberg

9 ай бұрын

@@JonnyDIY what made you get the 2.4l NA engine instead of the 1.5l I would like to know why and your opinions

@JonnyDIY

9 ай бұрын

@@Per-MichaelJarnberg pretty much same power and gas mileage but I think will be a more reliable engine without the added stress from higher compression because of the turbo. I was sad to see they dropped the non turbo option but it seems all models of vehicles are moving towards turbo engines, even trucks. I like them just dont think the engines will hold up for as long but time will tell

What size are the crush washers?

@JonnyDIY

4 жыл бұрын

I get them at dealer for cheap, but sometimes I pick some up at Autozone, or any other auto store. Not sure the exact size but the guys at the auto store will know which one, for Japanese cars

Thanks for the video brotha you da man.

@JonnyDIY

4 жыл бұрын

You're welcome 👍🏻

My mom has a 2017 CRV and on that year you reset the oil life from the menu button on the steering wheel

@JonnyDIY

2 жыл бұрын

Yes for any model other than LX I believe. I linked a video of the process in description

Honda dealer wants $85. to do an oil and filter change. Damn, I'll do it myself for $30.

@JonnyDIY

Ай бұрын

@@warrenlun2903 There you go! 👍 Will save a lot of money just doing oil changes yourself over the lifetime of the car

go ahead

@JonnyDIY

10 ай бұрын

You betcha 👍

I believe 0-20 only made synthetically ?

@JonnyDIY

4 жыл бұрын

Yes you're right, as far as I know 👍🏻

@njsongwriter

3 жыл бұрын

0W-20 is pretty much only available in synthetic except that Pennzoil has a 0W-20 that is labeled as a synthetic blend.

@TheDerek5757

3 жыл бұрын

@@njsongwriter I'll stick with Mobile 1 😁

I noticed your speedometer is different from mine is there a setting?

@JonnyDIY

3 жыл бұрын

If you have model above LX such as EX or Touring I included a link in description to a video explaining how to reset oil light 👍

I've always been taught to remove the filler cap first to allow it to drain better, as well I wouldn't put the drain plug on till after removing the filter and letting that drain a bit.

@JonnyDIY

2 жыл бұрын

Yes those are good ideas. I usually remove oil cap and put funnel in straight away, helps remind myself to be sure to refill oil as well. And yes good idea with the oil filter too, some cars more difficult depending on placement may need 2 oil pans to catch drips

Hi Jonny, how do I tell whether my CRV is a 1.5 liter or 2.4 liter CRV as they have different sizes (I guess) of engine oil filter. Thanks

@JonnyDIY

3 жыл бұрын

The 2.4l engine was only available on the base model LX models of years 2017, 18 & 19. 2020 and newer dropped the 2.4l and only offer the 1.5l turbo 👍

@cying6614

3 жыл бұрын

@@JonnyDIY Thanks buddy

@JonnyDIY

3 жыл бұрын

@@cying6614 You're welcome, glad to help 👍

Great video

@JonnyDIY

2 жыл бұрын

Thank you, glad to help! 👍

How long between oil changes on these cars?

@JonnyDIY

2 жыл бұрын

7 to 10,000 miles usually. They also have a built in Oil life percentage gauge if you flip through the odometer button. When it gets to around 10-20% I usually change

Torque spec on the drain plug?

@JonnyDIY

Жыл бұрын

Think its 30 ft lbs with a new all metal crush washer. Don't use a plastic or semi plastic crush washer or will skew the torque

@JonnyDIY

Жыл бұрын

I usually just tighten it by feel though 👍

How is that oil quality wise

@JonnyDIY

3 жыл бұрын

Been using it for almost 20 years, works just as well as the other brands. Only brand it didn't seem to like was the Mobile 1. Maybe its just a bit too thin

How many Qts, 3.7, 4 or 5 for the 1.5 turbo engine?

@JonnyDIY

3 жыл бұрын

For the 1.5l turbo engine you'll want to use 3.7 quarts 👍

Thank you for the video

@JonnyDIY

3 жыл бұрын

You're welcome 👍

Thank you

@JonnyDIY

2 жыл бұрын

You're welcome, glad to help 👍

"Go ahead and change the crush washer, if it looks like it's worn out." Corrected: "Change the crush washer EVERY TIME, prior to reinstalling the drain plug."

@JonnyDIY

2 жыл бұрын

Lol yes should be replaced every time, but I know people who've used same one without issue for years hah

@carlovanrijk4039

Жыл бұрын

@@JonnyDIYI also bought a set of 10 crush washers from RockAuto, I’m thinking they’re a hardened aluminum. I’ve used the same one for 3 or 4 oil changes, and no problem with leaking. But I make it s point to change it out at least once a year. No probs.

@JonnyDIY

Жыл бұрын

@@carlovanrijk4039 yes it's a good idea to change every once and again at least. The soft aluminum ones do get compressed and require a little more torque each time which could theoretically lead to stripping of pan and or bolt 👍

you need someone to hold the camera while you do these things. i had to slow down the video to see things properly to make sure i did it right. lol appreciate the help tho.

@JonnyDIY

3 жыл бұрын

I wish I had someone to help me lol. Glad the video helped you out 👍

Do a video on Coolant change for crv

@JonnyDIY

2 жыл бұрын

Yeah it's getting almost time to swap it out in the next year 👍

@gritch19

2 жыл бұрын

Look forward to it and thanks for your previous videos

@JonnyDIY

2 жыл бұрын

@@gritch19 you're welcome, glad to help 👍

Nice video mate💪💪💪

@JonnyDIY

4 жыл бұрын

Thank you 👍🏻

Is the 2.4L engine on the 17 crv direct injected?

@JonnyDIY

4 жыл бұрын

yes I believe so, luckily have had no issues with this one 👍🏻

@njsongwriter

3 жыл бұрын

The first year the CR-V had GDI was 2015. It's called the Earth Dreams engine. That's why I refuse to buy newer Honda's.

Need to put fresh oil in the filter to prevent dry starting 😌

@JonnyDIY

2 жыл бұрын

Yes you can prefill this oil filter somewhat. To be honest on a regular vehicle with an oil filter like this it doesn't matter. Theres plenty of oil on parts and pressure builds so fast. Now on a big ole diesel yeah prefill. But oil changes are one of those things everyone does different 👍

Good job thanks a lot

@JonnyDIY

4 жыл бұрын

You're welcome 👍🏻

hows that supertech brand?

@JonnyDIY

4 жыл бұрын

I like it. Seems just as good as others in my experience. Been using their conventional oil for years and now started using their synthetics too.

@LuhSlaney

4 жыл бұрын

Badass, i wonder how it would hold up in my BMW...but i dont wanna risk it

@JonnyDIY

4 жыл бұрын

Im sure the synthetic would do just as well as others. I hear Amazon basics oil is just re-labeling Supertech

@LuhSlaney

4 жыл бұрын

Lol

@marcusmendoza1633

4 жыл бұрын

Galvakistan Veteran there isn’t even really a bad oil on the market because all these oils have to meet and exceed certain requirements so in all honesty all oils are good just some are more superior then the others

The man is living dangerously with only that much gas left.

Question...how do you remove the clear plastic/lens cover that is in front of the steering wheel that protects the instrument cluster on a 2019 Honda CR-V. I like to clean the inside of it. Can you do a video on it? Thanks!

@JonnyDIY

4 жыл бұрын

Ohh mann youll probably have to take apart the whole dash to get at that thing. Best bet, if you HAVE to do that is get the service manual and look at diagram

@jamkpa

4 жыл бұрын

@@JonnyDIY Thanks anyway! But I think there is an easier way, I will try to contact a dealer again. I know it is a simpler job as I had it replaced once due to scratches when I first bought the SUV.

@JonnyDIY

4 жыл бұрын

Ohh ok yeah I think you're right. Looks like theres a bezel around the cluster that you can carefully unsnap to get at the mounting

@njsongwriter

3 жыл бұрын

You don't have to take apart the whole dash but you do need a set of plastic tools for removing dash panels and the like.

@jamkpa

3 жыл бұрын

@@njsongwriter Jack, have you done it? I have those plastic tools. The assembly looks so tight around, I am unable to tell where to insert the tools. etc. Thank!.

Thanks a lot

@JonnyDIY

4 жыл бұрын

You're welcome 👍🏻

Thanks bro!!

@JonnyDIY

4 жыл бұрын

you're welcome 👍🏻

Good video man! Hey how has your Lx Crv been? You haven't had any of that engine oil/gas dilution issue have you? I know it's common in the 1.5liter and allegedly not the 2.4liter...having any issues?

@JonnyDIY

3 жыл бұрын

Thanks. Nope, no oil dilution problems. I've heard it's mostly in the 1.5s and from driving lots of short trips in cold weather

@area859

3 жыл бұрын

@@JonnyDIY So it does not affect the lx 2.4 liter engines right?

@JonnyDIY

3 жыл бұрын

@@area859 I haven't heard of any

@area859

3 жыл бұрын

@@JonnyDIY Im looking to buy a 2017-2019 crv lx soon...they ill have katskin leather installed.

You MUST replace the crush washer every time you change the oil. Also very important to torque the drain plug to 30lbs MAX.

@JonnyDIY

3 жыл бұрын

You are right. Replacing crush washer seals as well as prevents from the need to over torque to get proper seal 👍 I bought a bunch in bulk recently

@smosh91

Жыл бұрын

@@JonnyDIY I turn them over and they crush the other way!

@JonnyDIY

Жыл бұрын

@@smosh91 good idea 👍 long as it works. I've heard of people using same one for 10-20 years

You should put 2.4 liter in your title, I think you will get more hits

@JonnyDIY

4 жыл бұрын

Thanks Matt. Its same job with the 1.5l too. Same oil filter just different oil capacity 👍🏻

@mattsausedo3292

4 жыл бұрын

@@JonnyDIY I figured lol, but I was not for sure. I think yours would be the only one with 2.4 l in the title if you did though.

boy that oil was almost as dirty as that guy's in LA w/ the Altima.

@JonnyDIY

4 жыл бұрын

Wasnt too bad actually. New cars keep oil pretty clean and this was mostly all highway miles

Good video but I would just use a combo wrench instead of pulling that ridiculous skid plate off. 6 fasteners with three types of drive? Thanks honda!

@JonnyDIY

3 жыл бұрын

Yeah you can tell Honda is wanting people to bring their car's in for service

Can you suck the oil from the dipstick just like some European cars?

@JonnyDIY

4 жыл бұрын

Never tried it, but probably

@cesarbojorquez7418

4 жыл бұрын

Jonny DIY I have done that with my other cars and take 20 min to do the job and not a single drop of oil dropped

It’s not a 1.5 turbo, is it? They have oil dilution problems

@JonnyDIY

4 жыл бұрын

No it was the 2.4l non turbo. Sadly the engine is no longer even available in the Cr-v 😔

@laviebanale

4 жыл бұрын

Jonny DIY They have 2.4 L engines for the 2017 CRVs? I thought starting in 2017 all Accords, Civics, and CRVs were 1.5 turbos.

@JonnyDIY

4 жыл бұрын

@@laviebanale 2017 to 2019 Crvs you could get 2.4l non turbo on base model LX's. Now in 2020 model they no longer offer 2.4l in any trim. Probably cheaper for assembly line and production to just do 1 engine

@JonnyDIY

4 жыл бұрын

Or they needed to lower overall gas mileage for EPA

Dam, I processed ramps like those at Amazon, rhino brand or something I think.

@JonnyDIY

3 жыл бұрын

Yes exactly! Rhino Ramps. My cousin bought them on a trip and gave them to me. Worked great for me so far. I always throw a jackstand under just in case

@rockysmith6105

3 жыл бұрын

@@JonnyDIY Absolutely, Jack stands save lives. Also just to the general public: never trust cinder block to do a jack stands job.

@rockysmith6105

3 жыл бұрын

@@JonnyDIY Also something I just sat down for a few minutes to think through, if it isn't already something frequently covered that is, you can pretty readily estimate the conversion from imperial to metric sockets just recalling that 4mm=5/32" (roughly) it's closer to 1.26 thirty-seconds of an inch per millimeter but 1.25 isn't bad because 0.8 is a nice reciprocal to go from imperial to metric, and won't land you more than a millimeter or two off within an inch. Just a nice thing, started at the classical 2.54 cm/in and did conversions to find something practical.

@JonnyDIY

3 жыл бұрын

@@rockysmith6105 thanks for sharing, that should be helpful

@rockysmith6105

3 жыл бұрын

@@JonnyDIY You put a lot of time in combing these comments, I can really appreciate that. I'll have to request you not reply to this one, just to conserve your time good sir

The filter and drain bolt were put on entirely tight

@JonnyDIY

4 жыл бұрын

I know I hate that. Some rookie mechanics always do that

Differrent fasteners on bottom cover..ridiculous

@JonnyDIY

4 жыл бұрын

3 different ones 🤦‍♂️ so dumb.

@asinegaasinega

4 жыл бұрын

@@JonnyDIY Be glad it's not hex bits. Stupid Nissan and Mazda designers are worst idiots! at least, these are regular flat head philips and mm bolts. ARGGHHHH, still it's maddening to have three different ones.