Thanks for this video. I am changing the rear rotors and pads on my sons 2016 Kia Rio. You are really good at details like size of wrench needed and even the camera angles to see what you are doing. I happened to have that brake piston cube in my tool box. It's been years since I used it and needed a reminder and you made it easy for me. (No second guessing what I was doing)

@AnythingAuto

7 ай бұрын

That's why I'm here :) i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

Damn you made that look so much easier then I just did lol. Great job.

@AnythingAuto

Жыл бұрын

Thank you. Please like and subscribe for more. 5 brake jobs a week helps lol

@badass1g

Жыл бұрын

@@AnythingAuto can I use any type of grease for the metal parts? Or does it need to be that stuff exactly? Thanks again man still can’t believe how easy you did that hah!

@AnythingAuto

Жыл бұрын

@badass1g most other will work also. Anything that will stay that is.

Thank you sir ...

@AnythingAuto

2 жыл бұрын

Your welcome. Glad It helped. Please like and subscribe for more

I always thought putting grease on the ears for the brake pads had an issue with attracting brake dust and other crud which potentially causes issues later. I've always used grease under the stainless clips, and spray graphite (no grease to hold particulate) where the pad ears ride against the stainless hardware. I use the purple Permatex stuff on the back of the pad, the 3M silicon on the pins, and Fluid Film under the rotor against the hub.

@AnythingAuto

Жыл бұрын

i hope this video helps. feel free to like and subscribe for more. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

Can you use the old pad and c clamp for piston or you got to have that tool to screw it down thanks

@AnythingAuto

Жыл бұрын

If they are a push in piston you can push. If it's a screw in piston you'll need a tool. This one needs a tool. You won't get anywhere pushing that one in. i hope this video helps. feel free to like and subscribe for more. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@siknessgaming7305

8 ай бұрын

You can use a pair of curved vise grips, that's what I used and it worked perfectly.

Hi i have changed rotor and pads but how do i adjust the handbrake ? Grt video btw 🙂

@AnythingAuto

6 ай бұрын

What do you mean adjust it? i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

@damiennordendal2280

6 ай бұрын

The emengersy handbrake cable on the brake caliber do the need to be tightend? The handbrake inn the car is a bit loose hope you understand what i meen 🙂

@AnythingAuto

5 ай бұрын

I don't think that can be adjusted, but if you pull apart where the hamburg clever is usually there is a way to make the adjustment from there

@damiennordendal2280

5 ай бұрын

Okey i will try that thank you great video btw 🙂

Do you need to bleed the brakes?

@AnythingAuto

8 ай бұрын

Not unless your pedal is spongy. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.

Warum macht man die Radnabe den Bremssattel halter und die Bremsbelag Nut ( Edelstahl Bleche ) nicht sauber. Für mich Daumen runter 👎

@AnythingAuto

9 ай бұрын

Ich habe die Nabe abgeblasen und gefettet, da sie in gutem Zustand war. Ich habe deutlich erklärt, dass ich außerhalb der Kamera die Passfläche und die Hardware des Bremsbelags poliert habe. An allen Reibungspunkten wurde vollsynthetisches Fett aufgetragen.