2015-2021 Subaru WRX Air Oil Separator Install
Тәжірибелік нұсқаулар және стиль
This video will show you how to install the IAG Air Oil Separator (AOS) on the 2015-2021 Subaru WRX. This was done on a 2018 but the 2015 and 2016 years require the ECU to be relocated. IAG AOS was purchased from www.Subimids.com and listed below is a link to it.
IAG Air Oil Separator: subimods.com/products/iag-per...
Пікірлер: 32
I was so skeptical on tackling this myself till I came across your video Great video and quality and detail really appreciated it
Hey i appreciate these videos. They give me an idea of what i will face if i decide to do upgrades on my WRX, thanks again.
Dope video man I really appreciate the details! I will definitely refer to this video when I put a AOS on my WRX 🤙🏽
great job man thank you so much gunna do mine this weeken!
Well done you explain everything very good 👍
Replaced the missing snorkel push pin.. nice!
Great video man🙌🏽 you think the ecu wires are ok up against the AOS as it gets to coolant temps?
If you take and squeeze the clamp before and stick a 10mm socket on it, you can just slide it right off when it's where it needs to go
Where does the Pcv after you removed from the engine the one you replaced the elbow plastic
Thanks for this video! Do you think it will be the same process for a 2014 Forester XT?
@BLUECOLLARGARAGE
7 ай бұрын
It will be a little bit different not sure if IAG makes one for the 2014, but I know Crawford Performance does and I think the unit mounts on the driver side by the fender.
Thanks for the video. Is it possible to lower the iag tank to fit the sti front strut tower? A shop did this installation for me .i tried putting on the strut tower but it didn't fit. Any advice.
@BLUECOLLARGARAGE
10 ай бұрын
Did they have to relocate your ecu?
@Dillz107
10 ай бұрын
No, they didn't relocate the ecu.
i know this is a long shot but does anyone know coolant line that is at the 25:00 min mark lol. i was doing this yesterday and when i used vice grips it kind of snagged a hole in it and i need to replace it. i know im not the smartest for this lol
I have the 2016 and am going to do this myself. Can I just do everything you just did and relocate my ecu at the same time ??
@BLUECOLLARGARAGE
8 ай бұрын
Yep should be pretty much the same procedure, and yes with yours being a 2016 you will have to relocate the ecu.
@abc123361
8 ай бұрын
@@BLUECOLLARGARAGE thanks man im pretty new to all of this so with that extra hose you were talking about at the end how do I find out where that goes ?
@BLUECOLLARGARAGE
8 ай бұрын
@@abc123361 I believe that’s just a vent hose for your year id have to look back at the instructions to make sure but it’s pretty simple plus the instructions they give are very well written.
@abc123361
8 ай бұрын
@@BLUECOLLARGARAGE thanks for all your help I appreciate it! I assume they send instructions with?
@BLUECOLLARGARAGE
8 ай бұрын
@@abc123361 no problem. They give you paper ones or a qr scan code for instructions.
Are there any differences with the 2017 wrx?
@BLUECOLLARGARAGE
6 ай бұрын
No it will be the same procedure.
Hi is this the same for 2015 wrx
@BLUECOLLARGARAGE
2 ай бұрын
Yes same kit only thing different you’ll have to do is relocate the ecu with the provided bracket.
what headlights are you running
@BLUECOLLARGARAGE
7 ай бұрын
This is my son-in-laws car and he’s pretty sure these are them www.subispeed.com/products/ss15wrxhl-sq-subispeed-led-headlights-with-drl-sequential-turns-2015-wrx-sti-no-hardware?gad_source=1&gclid=EAIaIQobChMI8KbytJrUggMVHiytBh02FAapEAQYAiABEgIOPfD_BwE
🔥💯🇺🇸
Lol you skipped the whole ecu install
@BLUECOLLARGARAGE
3 ай бұрын
No I didn’t. Since mine is a 2018 the ecu doesn’t have to be relocated. That’s only if the car was manufactured prior to 04/30/17 the ecu needs to be relocated.
Mine didn’t even come with instructions 🥲
@BLUECOLLARGARAGE
3 ай бұрын
Hopefully this video helps you out then.