What are the torque specifications of the crankshaft and connecting rods
@jamilalrawass72592 жыл бұрын
ملاحظه خطيره عند تركيب راس المحرك يجب ان لايكون المستم الاول او الثاني فوق يجب تسويه البساتم في الوسط
@user-sq6bc2tu6w2 жыл бұрын
ماشاء الله شغله نضيف
@ratheeshratheesh18812 жыл бұрын
How much are main bearing bolt torque?
@turbo34922 жыл бұрын
No point using a Torque Wrench if you are going to ignore the click and carry on tightening past that point.
@danielpineda9920
2 жыл бұрын
You don’t know how much this is bothering me watching that part of the video 😂😂
@garniful
2 жыл бұрын
@@danielpineda9920 it looks like he is fully knowing what he is doing... But yeah sir Could that Torque Wrench be made for a different engine? is not it just fine to over tighten crank bearings
@royangelomartin25882 жыл бұрын
Very nice
@buboybebing37162 жыл бұрын
ANG LINIS NG PAGKADALI MO KABAYAN,,GOOD JOB.AND MORE VLOG PA KABAYAN
@batangtalyerngriyadh9137
2 жыл бұрын
Thank you sir
@dilsonurdaneta9663 Жыл бұрын
Sería tan amable en hacerlo en español tendrá un vídeo de un sonata motor 3.3 año 2004.
@boylenard99142 жыл бұрын
Bossing sonata 2015 LPI CVVL engine din kotse ko dto sa BAHRAIN imported from korea LPG ang karga nong nasa korea pro ngayon converted to petrol na 3months ko ng gamit,my ginawa kna bang LPI engine jan?
@mbudautomotivelife80262 жыл бұрын
Pa recommend kabayan, apply ako dyan.
@batmanlives64562 жыл бұрын
Do it properly do an LS1 upgrade
@jt82802 жыл бұрын
Asian brother, would you still recommend buying a Hyundai/Kia ?
@lonniebeal6032
2 жыл бұрын
None of the 4 cylinders unless you are ready to do a combustion chamber flush every year or 8,000 miles. A Korean mechanic tore into a 2022 Optima with a 2.5L using oil after 9,000 KM. Their 4's are a bad design, the top ring is too close to the top of the piston so it gets sludged and carbon build up from GDI and EGR system. Resulting in oil consumption. I have a Tucson Turbo with 48,000 doing ok right now, but I started doing the intake flush 2 years ago, use only full synthetics, run premium fuel for the detergents. The 2017 Sportage with 68,000 is using a qt. of oil in 320 miles, going into Kia for a professional flush since it has warranties in 2 days. Had I know about this, I'd of got a RDX, MDX, or Rav4 and paid more.
@jt8280
2 жыл бұрын
@@lonniebeal6032 Thanks for your time Lonnie. I will either buy a newer Honda or Toyota. No wonder you don't see Korean cars on the road.
@abqmaqe Жыл бұрын
Saan k sa Riyadh na company brod d2 ako sa los angeles
@batangtalyerngriyadh9137
Жыл бұрын
Sa riyadh po ako may talyer kami na nagmamanage ty
@sheraaj3046 Жыл бұрын
Nf sonata 2.0
@drakespahn531 Жыл бұрын
That crankshaft should not spin that easily, rod bearings easily too much clearance. Won't last long.
Пікірлер: 25
Loved it Good content
What are the torque specifications of the crankshaft and connecting rods
ملاحظه خطيره عند تركيب راس المحرك يجب ان لايكون المستم الاول او الثاني فوق يجب تسويه البساتم في الوسط
ماشاء الله شغله نضيف
How much are main bearing bolt torque?
No point using a Torque Wrench if you are going to ignore the click and carry on tightening past that point.
@danielpineda9920
2 жыл бұрын
You don’t know how much this is bothering me watching that part of the video 😂😂
@garniful
2 жыл бұрын
@@danielpineda9920 it looks like he is fully knowing what he is doing... But yeah sir Could that Torque Wrench be made for a different engine? is not it just fine to over tighten crank bearings
Very nice
ANG LINIS NG PAGKADALI MO KABAYAN,,GOOD JOB.AND MORE VLOG PA KABAYAN
@batangtalyerngriyadh9137
2 жыл бұрын
Thank you sir
Sería tan amable en hacerlo en español tendrá un vídeo de un sonata motor 3.3 año 2004.
Bossing sonata 2015 LPI CVVL engine din kotse ko dto sa BAHRAIN imported from korea LPG ang karga nong nasa korea pro ngayon converted to petrol na 3months ko ng gamit,my ginawa kna bang LPI engine jan?
Pa recommend kabayan, apply ako dyan.
Do it properly do an LS1 upgrade
Asian brother, would you still recommend buying a Hyundai/Kia ?
@lonniebeal6032
2 жыл бұрын
None of the 4 cylinders unless you are ready to do a combustion chamber flush every year or 8,000 miles. A Korean mechanic tore into a 2022 Optima with a 2.5L using oil after 9,000 KM. Their 4's are a bad design, the top ring is too close to the top of the piston so it gets sludged and carbon build up from GDI and EGR system. Resulting in oil consumption. I have a Tucson Turbo with 48,000 doing ok right now, but I started doing the intake flush 2 years ago, use only full synthetics, run premium fuel for the detergents. The 2017 Sportage with 68,000 is using a qt. of oil in 320 miles, going into Kia for a professional flush since it has warranties in 2 days. Had I know about this, I'd of got a RDX, MDX, or Rav4 and paid more.
@jt8280
2 жыл бұрын
@@lonniebeal6032 Thanks for your time Lonnie. I will either buy a newer Honda or Toyota. No wonder you don't see Korean cars on the road.
Saan k sa Riyadh na company brod d2 ako sa los angeles
@batangtalyerngriyadh9137
Жыл бұрын
Sa riyadh po ako may talyer kami na nagmamanage ty
Nf sonata 2.0
That crankshaft should not spin that easily, rod bearings easily too much clearance. Won't last long.
Nasa pinas kaba kabayan
@batangtalyerngriyadh9137
2 жыл бұрын
Ala boss nasa riyadh pa ako