This is an amazing set of Videos that you have done on your Sonata. I am very impressed with your knowledge and the detail you went into in outlining the step by step approach. I am very sorry it did not have a better outcome for you. I had a 2007 Sonata that gave me great service, and my daughter took it over after I was done with it. Just traded it in at 147,000 miles, since it was not being used much recently. Was looking at a used Elantra for a friend but your series of videos have convinced me that I have owned my first and last Hyundai. Thank you for your good work.

@conradscheepers4122

Жыл бұрын

If the engine has got a recall, why try to fix it youtself? Hyundai will give you a new engine .....

Total respect, i have the same problem on my sonata hybrid 2013 at 69k miles. Fortunately somebody told me about the extended warranty , and they are working on it right now replacing new engine.

@steve71396

2 жыл бұрын

We’re you charged?

@Official_NazYT

Жыл бұрын

@@steve71396 free

The fireworks @ 9:49 .... Classic.

@JrZCarZ

4 жыл бұрын

It was too funny to edit out cause my neighbor couldn't have picked a better time to light it off 😄

No limit on the mileage for this recall now. Just took mine in with 165k miles and they didn’t even ask any questions, just took it in and said “If it’s the recall we’ll replace the engine for free”. They called me two days later and said “rental is on us and we’ll have the engine done in 2-3 weeks”. SWEET!!!!! Time to put your old bearings back in this thing and take it to the dealership.

@benjones3437

2 жыл бұрын

Your so right i wouldn't have touched it and just waited i for a 13 with 124k miles so far im loosing 1 Qt every 1600 miles so ima ride it as my backup car as long as i can lol

@krumzakon633

2 жыл бұрын

Mercedes has similar issue with the wrist pin on cylinder one. They recognize the issue and have TSB but did never recall it out of pocket 8 to 10,000

@cnd422

Жыл бұрын

What dealership did you go to? My local dealers are saying 4 months or more.

I just got my car from the dealership! After replacing the bearings myself I was not able to fix the problem. So the other day I was doing some research on google to see what else I was able to do fixed it. Then really small there was a link for recalls in one of the website i was on. And there it was hiunday sonata engine bearing recall but because I try to fix it myself I did not have much hope! So anyways I call schedule appointment to bring the car and after couple hours later they call me to tell me they were going to change the engine for free! I’m so happy. Now the car feels totally new.

WOW; what a video, or all the saga! the best on journey on YT for sure, so detailed and educational!! Amazing!

I'm glad I saw your video cause I'm very concern about my 2013 sonata. I always keep up with the oil changes and make sure everything else is good. Even though my car is not high miles yet. It's around 70000. I also got a recall on the fuel line might cause engine 🔥. I'm getting that fix by hyundai with no cost. I love my car I'm just worried about dying in it on the road or worst. Can't afford a new car so God is watching over me. Sorry for your lost of your car. Just be glad your alive and well God bless.

@guidedbygreen1480

3 жыл бұрын

You'll know your car is beginning to die when your oil consumption begins to rapidly increase... Then you can get an oil consumption test done by Hyundai for free. Call the Hyundai roadside assistance number if your local dealership won't help. This is a manufacturing recall with many class action lawsuits... They'll take care of you

Thank you for all of your videos…. You are a professional mechanical ⚙️…. I have same problem Hyundai Sonata 2013 140k mile

@JrZCarZ

Жыл бұрын

Thanks for watching! Hopefully if you take your car to Hyundai they will do right by the class action lawsuit and replace your engine👍

I am dealing with the same issue. Engine stalled and tomorrow I take it in for diagnosis at my local Hyundai dealership. 2012 Sonata with 140k miles.

Thanks JR. Good try. I hope my engine can be salvaged but if I see shavings on the solenoid its a wrap for me.

Great video, great job, you did your best. thanks for the great information.

@JrZCarZ

Жыл бұрын

Thanks for watching! I wish it had a better outcome, but it is what it is unfortunately.

Great job man.

@JrZCarZ

3 ай бұрын

Thanks! I was hoping for a better outcome but you win some and you lose some

Just left a comment on one of your other videos on an update, well I found it here and feel Hyundai has yet let another person down. I have owned 3 Hyundai's and have been happy with two of them but my 2016 Sonata will be my last Hyundai. I was one of the lucky ones and got the "new" engine but the hell I had to go through to get it turned me off of Hyundai. In my owners manual I should be able to go 12,000 km between oil changes in the summer, I couldn't even go 5,000 km without adding oil. I'm telling everyone who asks about my Hyundai to stay away from the brand. Too bad Hyundai doesn't get this or doesn't care. Thanks for sharing your experience with us....too bad the ending couldn't have been a new engine.

I like your video no happy endings but reality God bless your efforts

@JrZCarZ

10 ай бұрын

Thanks for watching! I wish there was a better outcome but unfortunately that wasn't the case.

Wow, I'm sorry that you could not get it fixed. Maybe you could find a rebuilt or new motor somewheres. I had a similar thing with a 2002 Buick. It was a sharp nice looking car. But recently the motor started leaking oil & coolant at the same time really bad. The garage said they could fix it for a little over a grand. But I decided to chuck it & buy a new Kia. I hope I don't have these problems. I hope you get your car fixed.

Wow, I'm having the same problem same amount of miles. My Hyundai kept burning all the oil and now it's finished.

I’m so sorry about your car. I have a 2013 Hyundai Sonata with now 115,000 miles on it. I started an oil consumption test with one dealer then called them before I took it back. They told me everything had stopped 2 days prior. I took it to another dealer they told me everything stopped a month ago. I’m taking it to a 3rd dealer next week. I hope and pray this will work. I also talked with Hyundai National to a nasty woman who did everything to shut me up. I don’t know if mine will be replaced, but this is my last shot. It’s burning a quart of oil a month. My engine light came on last week.

Thanks for sharing .I have same problem and think to do same but after everything I'm looking for new engine

@JrZCarZ

Жыл бұрын

Did you go through Hyundai first and see if they would honor their replacement from the class action lawsuit they have against them? I would start there first. Don't bother trying to do the bearings cause all that junk ran through the block and would need to be really cleaned then fully rebuilt.

Good evening sir, but no offense on your repair. I give you great respect on even attempting to do this repair. I've literally been working on Hyundai engines for a very long time, and I'm a certified master rebuilder of their motors. You did stop the knock in the car, but you just missed one thing and that was clearing the codes. Clearing the codes would have stopped the CEL from flashing, and give the ECM an opportunity to identify that the issue was resolved in other words. Yet, I still give you much respect for even doing this sort of repair. I get these engines in all the time with spun bearings, but I use a complete rebuild kit, and I have not had one issue out of any of my repairs. The shoe string method really is a temporary fix, you must do a rebuild to get a permanent result. Thank you for the videos.

You can still definitely get that sanded down with the sand paper, cause I had the same problem on my Kia Rondo but now I have a problem with my forth bearing also so it’s a bit complicated but I think I can figure it out.

I was going to try this method until part 3 video. and I felt bad for you. Very nice try though.. it was so promising in the beginning... I guess i'm going to buy another engine too

mine is in the dealer hyundai for the 3rd time, I'm waiting to see wht they say we need to fix next

Bad luck mate nice vid anyway

I watched all your videos on the sonata. I am in the exact same situation with the car, a 2013 sonata limited, and with Hyundai. What did you end up doing with the car and what about Hyundai? Did they ever do anything?

Giving how complicated the process is, no wonder Hyundai decided to replace the whole engine rather than fixing it. It's very sad that the car couldn't make it. What are you going to do with it now?

Hi I did you get the right rod bearing they are different size by colors

Very helpfully

Was wondering, did you clear the codes again after fixing the rod bearings? That might have resolved the limp mode / flashing check light code.

@matthewcleary6259

Жыл бұрын

Ya I wanted to scream... You need to clear and reset adapter values and then clear all codes and voila limp mode is gone and all of a sudden you have responsive throttle but whatever this is also two years ago lol so go get your car back that you probably scrapped and tell him you have to put a scanner on it real quick take 3 minutes lol Hope everything works out

Thanks

Good effort, too bad it didn't work.

well jr, i guess it’s time to make some serious decisions on weather to keep it or get into something else.... man!... i hate that it happened but i have been there myself, good luck 🍀

I am sorry you went through all that work to find out that the entire motor was gone. I have a 2012 Hyundai Sonata 2.0 turbo. It has 67,000 miles on it. I think I have to change a couple of bushings on the rear suspension. Its making noise when hitting bumps. Already replaced the rear shocks, I think the rattle is coming from the rear lower control arm. I bought it from my neighbor and he said the warranty is transferable to the new owner as far as the drive train goes, up to 135,000 miles ? Is anyone in agreement with this, or is there a dispute here? Thanks.

My Hyundai Santa FE engine went on me a few weeks ago! I am 200 klms away from the nearest dealer ship! To make a long story short did not want to pay for a tow bill etc.. had another mechanic look at it all cost money! Decided to take a chance and haul it to Hyundai and hopefully on warranty or else i am screwed! I am already out 1000 dollars , car had 175000 klms.

Valiant effort😂🎉

The last Mailer I received from Hyundai for the engine recall was unlimited milage or 15 year of purchaser date of car for the engine repair. Have you done anything with your car since you worked on it last?

2014 Santa Fe 2.0T was purchased in January 2020, not 2019 if that matters?

The check engine light is flashing because there is a multiple cylinder misfire. You can clearly hear the car missing when you first started it. This is part on Hyundai/Kia recall! You needed to check compression on the cylinders. There may had been a slightly bent rod that is throwing the timing off, which you should have checked once you took the bearings out.

@austyndrums1993

Жыл бұрын

Cel is flashing because the misfires detected are severe enough to damage catalytic converters.

Man I just had this car just for 2 months and its sounding exactly what yours did...

Good videos just want to give you my opinion Everything it was good but because it was so bad the crankshaft I will recommend it to take it to the machine shop or buy a new crankshaft and that would be fixing your problems again good video God bless you....

@JrZCarZ

Жыл бұрын

Thanks for watching! I more or less wanted to see what it would do but this car went on to 'bigger and better' cause I have no faith in the brand. 👍

Sorry to see all the troubles you've gone through with your car. I'm a little confused about which Sonatas these issues/recalls actually apply to. My daughter has a 13 Sonata 2.4 but when I search her VIN for recalls, it shows nothing. What's the difference between the engine in your 13 Sonata 2.4 and her 13 Sonata 2.4?

@not_jon_vendi

3 жыл бұрын

I believe it has to be the GDI engine. I'd double check at ur dealer. I have the 13 limited and it just happened to me today. Took it to the dealer, new engine free of charge and a rental free of charge while I wait

@bill40409

3 жыл бұрын

@@not_jon_vendi Thanks for the reply. My car is also the 13 limited GDI 2.4 engine, no recalls. Called the local dealer, he said no recalls but the engine has a lifetime warranty. I'm going to get the car other to the dealer sometime soon just to have them take a look.

Did u ever keep the car to get the engine replaced or did u scrap it?

As far as I'm concerned, this wasn't that big of a failure on your part. The primary concern was the rod knock which you seem to have fixed. Who knows how long the other journals were pitted or damaged for before the #1 rod started knocking. Likewise, who knows how long they would have continued on before also making noise or seizing. I'd say this was a success - at the very least, you fixed the rod knock and it didn't cost much, even if it doesn't last forever.

Now it's no cap on mileage !!

@mikekeenan9797

3 жыл бұрын

Is this a fact? My car took a crap the other day and the codes match up with the problem. I got a p0014 and p1326 at 158k miles

@mikekeenan9797

3 жыл бұрын

Update: my car did have the recall problem and the engine was replaced for free. My car was a 2012 limited with 158k miles on it and had the 2.4L engine

SOLD??

Well, I've been there, with mechanical things that didn't work out as I hoped. Sometimes you eat the bear, sometimes the bear eats you. I've usually got my helmet on and I'm ready for anything, but if I heard that rod knocking, the heap would've went to scrap. You took it further than I would have.

My 2011 Sonata's engine seized last week on 170k km, and Hyundai Canada is making engine replacement for free but i will pay pay for damaged Turbo and some other parts. The reason they fix is ex owner didnt take the car for engine recall, and Hyundai is helping me out. They are doing a nice work in Canada.

@crow_2k11beatsbydre8

3 жыл бұрын

Are you getting a rebuilt engine or new engine?

Im just start fix that next week

Same happened to my car but not as bad. Busy with it right now. Waiting for new bearings to be delivered. Just a note for your measurements. You are well out of spec. The tolerance is 0.031mm to 0.045mm, not inch. which translates to 0.00122inch to 0.00177inch. Assuming your rod mark is B, you need to order the black color lined bearing from the dealer. For others with the same motor who are doing this and want the rod cap bolt torque spec. it's 13 - 15.9 ft-lb +88 to 92 degrees.

I know it’s a bit late but did you try resetting the CEL after the bearing replacement? Also that oil pump looked like it had balance shafts in it - were those timed correctly? They need to be properly timed to the crankshaft to balance out vibrations.

@coreywilson701

2 жыл бұрын

I was looking for this exact comment

@matthewcleary6259

Жыл бұрын

Haha I was saying the same thing in my head those marks on the chains those are so you line up the camshaft they have to be in particular spots but when he took the oil pump off I'm willing to bet he might have slipped that chain out so it's definitely going to be off time.. whatever 2 years ago... Willing to Bet not still under the car lol

@dwaynebrewton9482

6 күн бұрын

Don't quote me l maybe wrong but l believe the balance shaft is aligned to the crank not oil pump.

I recommend replacing the Theta II with a 2.0 Nu, not as bad of problems, and these Sonatas came with them, so fitment shouldn't be an issue, though Hyundai did finally get rid of the Theta engine altogether in their 2020 models in favor of the 2.5, 2.0, and 1.6 Smartstream engines, fingers crossed they can regain their reputation

@benjones3437

2 жыл бұрын

But did they ever really lose their reputation since they were actually fixing the issues?

You should've inspected all bearings first before doing any repair, good video anyway.

My 2013 Tucson spun all 4 rod bearings by 104k miles, the mains were pristine. Glitter everywhere. The camshafts have 1 bearing between the 2 of them, the head and caps serve as the bearing for the other 11 contact points which were wallowed out to the point the cams started chewing a relief in the side of the head. Not a robust design in my view.

How did you sping / rotate the engine so the cylinders 2/3 were showing so you can remove those bolts?

@JrZCarZ

Жыл бұрын

I put the crank bolt back in and rotated the crank using the bolt. With the plugs out it turns over fairly easy cause there's no compression.

The rod bearing clearance spec. of 0.003-0.004 in. is quite loose and seems like it would result in low OP and spun bearings. What viscosity oil do they recommend?

@JrZCarZ

4 ай бұрын

Oil should be 5w20

@robertrpenny

4 ай бұрын

Is 5w20 the optimal oil or is that what the US gov't told them to run? If clearance is really 0.003" or more it should be much heavier. Bureaucrats declaring things doesn't necessarily mean its true.

Did you put the oil pump / balance shaft in back properly ? You aren't supposed to take that lower nut off the oil pump, but rather take out all the bolts attaching it and angle it out.

@JrZCarZ

6 ай бұрын

Yep it all went back together correctly

I have a 2013 sonata it just rolled over 105,000 it does rattle alil bit should i go ahead and take it to them to see if its starting to fail i really love this car wish they had a different motor for them

@JrZCarZ

3 жыл бұрын

Absolutely bring it to the dealer and express the rattling concern.

@dudehi3317

3 жыл бұрын

@@JrZCarZ ok i will thank you for replying so fast got your self a sub your very helpful man have blessed day

My 2012 recently had the rpm issue but it wouldn’t crank

@HEMITASKFORCE

3 жыл бұрын

Me too smh

I did the same job on my 13 sonata no more noise and driving fine

@JrZCarZ

8 ай бұрын

Hopefully it stays working well for you!

Yeap there used to or still be people making profits out off it buying 2.4 gdi vehicles from junk yard or auction and getting free engine but after COVID hitting it’s kinda hard . even real customers are getting declined engines replacement

Did you call Hyundai road side assistance? They usually come thru when your local dealership won't help..

@LawezeanaS197

2 жыл бұрын

the dealership came threw for me I'm just hoping they replace my engine mind went out today it had a knock sensor code

@guidedbygreen1480

2 жыл бұрын

@@LawezeanaS197 I dealt with the dealership (s) for so long to no avail.. ended up moving on and getting a Toyota. Hope they take care of you

Where did you get your bearings ?

@JrZCarZ

7 ай бұрын

Bought them off RockAuto.com

Did you torque the bolts for the rod?

@JrZCarZ

9 ай бұрын

Of course.

Dammmmm it. I feel your pain. This just happened to me on Sunday 10/11/20 to be exact. I already called someone to see if we can just buy a new engine and put it on there. I would like to know what did you do to your car though?

@JrZCarZ

3 жыл бұрын

Call your local dealer and send it to them. There's a lifetime warranty on the engines now due to a class action lawsuit so you should be able to get the engine replaced. How many miles are on it?

@guidedbygreen1480

3 жыл бұрын

Yes call your local dealership or Hyundai roadside assistance

@jordancoker6562

Жыл бұрын

@@JrZCarZ does this work on the 2015 sonata's 2.4 ltr too because mine literally did the same thing yesterday it only has 67,000 miles on it smh and I still owe 10,000 on it

@jordancoker6562

Жыл бұрын

@@JrZCarZ it has the extended warranty but I'm not the original owner of the car I'm the second owner I believe

@JrZCarZ

Жыл бұрын

@@jordancoker6562 yep it'll work for you. This is a class action lawsuit so they gave to act on it. It doesn't matter if time ther 1st or 10th owner.

The wording in the class action lawsuit doesn't say anything about 120k limit for extended warranty. It basically provides a lifetime engine block and powertrain warranty for all vehicles falling under this class action period!. They are BSing you if they say otherwise. Tow that vehicle to a Hyundai dealership and tell them you have a P1326 code, they are required by law to honor that class action settlement. Don't give up!

I have the similar engine which my 2012 Kia Optima Hybrid has and the engine is locked. The car was towed to the KIA dealership, I had all the recalls done. SC200 Knock sensor software updated and 15 years 150K miles warranty. There is no Recall for the engine they said which is SC140 unlimited mileage warranty one. But I don't believe that this engine did not have manufacturing failure as well. My car was 150340 miles and they said hey your car is over 150K miles. I said are you guys kidding me. It is only 340 miles more and it is almost 150k. And I asked what if my car was 149999 miles, they said they would replace the engine. This is how KIA shows its reliability to their customers. They lost me. I will never buy KIA again, I was looking for something new from KIA models. But I will not buy again and will never suggest it to my friends as well. They are playing games and they are not honest ! no show goodwill! I don't think they can gain the reputation in the USA Market !

Ah the gdi engines and oil dilution... .

When that bearing broking 100% pistol hits the valve and oil get mixed bad go buy head gasket or repair headgasket valve

Just bought a new 2023 sonata which replaced a 2000 Avalon with 265,000 miles. The Avalon is the best car in the world. Could not get a new Toyota at a fair price. The new Sonata has an awesome ride and tech. Seems I will not be owning it long term. I should of done more home work on the Hyundai engines. I will enjoy it for 1-3 years hopefully and then get something else.

@JrZCarZ

Жыл бұрын

I should hope by now that Hyundai found the errors in their engine manufacturing..... especially after the class action lawsuit that forced all these engine replacements and costed them so much money!

I have a 2014 Santa Fe 2.0 T Second owner Purchased from Nissan dealership in January 2019 with 71k Vehicle has been great until last week at 118k engine light and P0014 code appeared, engine died on dangerous curve on Interstate 81 Virginia. Pretty scary stuff, towed to dealer, now they say Hyundai will not replace engine because knock sensor recall was never done. We knew nothing about it. If the dealership where we bought it had done the recall work we would have a new engine, no questions asked. Legally dealer can sell used vehicles with open recalls. I know others have had engines replaced without recall work performed however maybe their engine wasn't as dead as ours, it sounds terrible. I've heard it depends on the Hyundai dealership you're using. I tried Hyundai National, they said they would not open a case. Still owe about $12k on this vehicle. Perhaps an attorney could help? If anyone has any suggestions I would be extremely grateful. The vehicle belongs to my 21 year old son who is a college student, he and his girlfriend we're driving when the vehicle left them in danger. State Police had to shut lanes down until vehicle was towed. Really bad experience, so glad they're safe at least.

Sorry to hear that the car wasn’t a survivor as much as it sounds stupid as much as this engine thing is a whole bunch of crap I still got a 2020 sonata to replace my 2013 at least this new car is fully under warranty and if something happens it’s covered now

@richardsledgecock2110

3 жыл бұрын

Just change oil every 300 miles and oil filter. Gdi engines tend to thin their oil with gas going past piston rings which dilutes the oil making it act like a much thinner oil.this happens mostly with cars that are driven short distances and not coming up to full engine heat saturation. Gdi engines are ok but you absolutely must change your oil more often.your 2020 should last a very long time if you do this.i never ever alow my oil changes to go much past 3000 miles. I own a 2020 santafe with the non turbo 2.4.it runs mostly about 30 miles a day broken up into several short trips .this is considered severe service and requires more frequent oil changes.i use a high quality conventional oil since I change it more frequently. Hope this helps you get many miles😃

@richardsledgecock2110

3 жыл бұрын

I ment 3000 miles not 300 miles lol

I have a 2011 limited (bought new) sitting in my driveway with similar fate. My wife's car, as I don't do Hyundai's, overall one might say we should've purchased a new Honda instead. That was my belief--but she liked the new design of the Sonata--and the rest is history. I am sorry if this fate has occurred with your Hyundai vehicle as well, and, I will never purchase another product from Hyundai.

How much would cost a replacement crank?

@JrZCarZ

4 жыл бұрын

The crank could be professionally ground and polished and undersized bearings put in but honestly the engine would have to be completely torn down and hot tanked to get any debris out before replacing all bearings and seals if I was going that far.

@19mati67

4 жыл бұрын

@@JrZCarZ That is way to much work. I would just pick one up from the junkyard, and with new 0 size bearing set(you already have) should be fine.

Hey bud did you reset the codes to get it out of limp mode? Not questioning your intelligence. Just a question. Our 2012 did the same thing but when I dropped the pan I discovered that the oil pump had failed and was destroyed. I found no signs of rod bearing wear. It's crazy. Also our vehicle has a rebuilt title which the NHTSA has given the automotive industry a loophole to get out of the warranty and recalls. We called everyone and they wouldn't do a thing. So I'm headed under the vehicle now to get everything back together.

@JrZCarZ

2 жыл бұрын

I had the battery disconnected for a long while so it cleared any codes it had. In addition I have a scanner that I was able to scan and reset codes. Nothing special or expensive. With a much more expensive reader I would have been able to see more.

@jeffmchenry2180

2 жыл бұрын

@@JrZCarZ absolutely. I was just asking. Our car is doing well with the replacement of the oil today except for p0016&p0017 and also a p0201. I'm cleaning the cam position sensors now. Not sure what's up with the #1 injector. Maybe the other 2 have a hand in it.

@jeffmchenry2180

2 жыл бұрын

Oil pump ***

@JrZCarZ

2 жыл бұрын

I'm interested in knowing what you're cleaning off the cam sensors. If you're cleaning anything off that looks like this..... kzread.info/dash/bejne/oIVrrtCvosvXoKw.html Then your engine is screwed.

My wife’s Hyundai has the same problems your Hyundai has smh. I called the service center at the dealership and gave them the vin but they said NOPE…there’s no open recall to replace that engine smh

@JrZCarZ

2 жыл бұрын

It's not a recall to replace the engine. It's a class action lawsuit that they extended the warranty. If you had the software recall done and the engine is throwing the p1326 code, they have to replace the engine. Take it to the dealer and have them look it over. Call Hyundai corp and open a consumer affair case and if they refuse, threaten legal action against them.

This is very disheartening. I was hoping Hyundai was a reputable auto manufacturer. Shoot...guess not. I have an 06 Sonata with 158,000 miles on it. Doesn't use a drop of oil. I saw somewhere a guy got several 100 k's on his Hyundai. Not sure, but I think I'll just keep my good reliable 06 and hope n pray it doesn't crap out on me. Actually it could be the aftermarket warranties might be a good investment. I had a Volvo semi truck that the warranty paid for itself many times over. I feel your pain for the loss. )-:

Can you please tell me torque specs for rod caps

@JrZCarZ

Жыл бұрын

They are torque to yield bolts so it's 14ft lbs, then an additional 90° turn.

@ftngs901

Жыл бұрын

@@JrZCarZ Thank you. I'm giving this a shot myself

The problems its head gasket hit you need buy head gasket

Thats weird because in most cases they cover it ive put several motors in the cars many well over 120k miles i have one rn at 144k im doing at work rn , and sorry to tell you but this will probably happen again because the issue is the oil passages on the engine dont flow well at all because they wasn't cleaned properly so unless cleaned then it will happen again

@therealhustle9974

3 жыл бұрын

I just got one warrantied out at 177k and I was not the original owner.

@JoeMommaFPV

10 ай бұрын

this makes TOTAL sense. I have had this repair done by the dealership once a couple years back. They claimed to replace the engine with a new one, about $13k worth of parts and labor. This week, I've started to hear a slight ticking in the rods again, so it's returning for a SECOND TIME! And the dealership is telling me "get service records ready, we need to inspect and make sure it's not due to your neglegency"🤬

@rushking19

10 ай бұрын

@@JoeMommaFPV they do replace them with a new or completely reman engine. The issue is the other thing that happens with these engines is that they end up burning oil and burn so much oil that they end up running low on oil a couple times and causes bearing failure. So most of the oil passage issues where fixed with Hyundai's first batch of replacement engines but the oil consumption wasn't because the piston rings and the gdi system is the issue.

We just got a mailing about the class action lawsuit settlement where they are offering to warranty the blocks for lifetime, no mileage restriction. They are also reimbursing people for out of pocket repairs and/or lost value if the car was sold. I'm guessing their recall said 120,000 miles but then the lawsuit takes it further. Did you get the mailing from Hyundai about the lawsuit claim form? When the settlement is approved you should try again to get them to replace the engine. It clearly says they would.

@1hondaluver

3 жыл бұрын

I received the same letter for my 2017 Kia Sorento. Apparently they are honoring the lifetime warranty because a co-worker of mine has a 2012 Sonata with 160k that had the engine start knocking. Hyundai put a new engine in with no questions asked. The work was completed within a week. Can't beat that.

You forgot to erase the old code before you started the car! If the code is there, the car will not rev even it doesn't have the knocking issue anymore. When the car was started you said you didn't hear any more knocking, therefore if you erase the code the car would have run fine. You could have gone for maybe 20k mile more before the car would have headed the the junkyard. Now it wouldn't have lasted a long time, but just enough to get you thru the pandemic. Also you could have used the heaviest weight of motor oil, like Mobile1 15W-50 and have less if any knocks. It should have been OK to use this oil on this engine.The engine limits rev because it detects engine knock, so a heavy weight of oil should eliminate the knocks. I ran into this problem. When I erased the code, the engine would rev, but when I drove it, and the knocking started, the code would come back and limit the rev again. And found your video.

@JrZCarZ

3 жыл бұрын

The battery was disconnected for about 2 weeks prior so no codes were stored. I also did clear codes after and that's not going to help anything if you have internal damage. You should NEVER have to put such a heavy weight oil in a modern car. All you are doing is making the root cause of the problem(spun bearings) which will lead to a catastrophic failure. When that happens, I wouldn't want to be in the car...... there's a reason Hyundai put the KDS in the PCM firmware update.

Hello from north Canada, I had one 2011 elantra and engine had no noise but a quart of oil every 2000 klm witch is 1200 miles trade that P-O-S ,,nice looking one for a 2010 buick with a strong engine and since i'm a happy camper.

By now you've probably heard from a bunch of people on what procedure to follow attempting to fix this problem., but for the rest of us it should be going like this., there should be nothing visible in the oil period..Then buy an aftermarket oil gauge & read what the pressure is..Then buy a cheap compression gauge & take readings according to the instructions that come with it.,Even if you would have found one bad bearing ., replacing it is for a city driving , backyard mechanic, with a bus ticket in his back pocket., and a buddy who drives a wrecker....He knows the car will be unreliable for the highway, & at best could go 2 months, to a year before it expires .,&" he is willing to drive it on those terms".. ..For people who have a suspect car that is still driving ., buy the aftermarket oil pressure gauge, & stop the engine if the pressure drops below 20 psi & stays there. You'll figure it out.,better than getting stranded!

Im so confused ? Why didn't you take it to Hyundai to get new engine???

@mama_ber7179

3 жыл бұрын

Wondering the same thing. My warranty (2016 sonata) ran out a few months ago and knock sensor code came up 2 weeks ago. Brand new engine from Hyundai free of charge.

@romyrakis4838

3 жыл бұрын

@@mama_ber7179 getting a new engine installed on my 2013 santafe sport right now, just realized they can even give you a loaner vehicle while you wait or reimburse for rental car fees. lifetime warranty on the engine, not a bad deal after all

@not_jon_vendi

3 жыл бұрын

I also got the loaner for free and getting a new engine. All covered for free by hyundai

@joeblow5863

2 жыл бұрын

I am in the same boat ! I phoned Hyundai and 200 klms away it would be at my expense to haul it to the nearest dealership

Shalom, I have a 2012 Hyundai sonata with 121,000 mi and mine was doing the same thing. There's a recall on those vehicles for that particular sound so you probably want to take it back to the dealer. They should be able to fix it and no cost.

@JrZCarZ

4 жыл бұрын

Take a look at my other videos, I opened a consumer affair case with Hyundai Corp and they basically told me they would do nothing for me being over the extended warranty by 15k miles. Good faith expenditures were cut because of the coronavirus.

@charlesandrews6478

3 жыл бұрын

Mine have 94000 smh and its doing this!!!

@mikekoch4932

3 жыл бұрын

@@JrZCarZ I would sue Hyundai for the price of the car new being 17K or so. Is BS just because you are over the 120K allowed to get the vehicle into the dealer BEFORE then does not make it right. You have a P1326 code and know is bad rod bearings since Hyundai can easily hookup their rod bearing clearance pass/fail tester to all 4 cyclinders and see FAILED. I am in the midst of getting a new engine 2014 2.4L sonata 86K miles and rob bearing clearance test now FAILED. What pisses me off is NO warranty at all on the new replacement engine ONLY on if the rod bearings go out of 'spec' again and fail the clearance test of pass/fail. Come on Hyundai, honor my NEW engine 1 year / 12K miles at the VERY least. It really should be next 3 years and 36K miles if you ask me since supposedly a NEW engine should last 3/36K right?

I actually rebuild these 2.4l Hyundai engines, and by far this was done all wrong. 1. The motor was not removed from the engine bay, which the shop manual calls for you to do this particular job. 2.There was no check for engine slap, which could also trigger the knock sensor. 3. The plastigage measurement should have been the #1 indicator that the crankshaft pin was extremely worn or the connecting rod inner bore was worn and needed to be replaced. 4. This guy did not know the proper reading of his measurements....let me learn him. Oil clearance specs for this 2.4l is .031~.045 mm (.0012~.0017 in), and his gauge was clearing reading .003 of an inch; which equals to .076 mm. This reading tells me that his crank shaft is shot at the pins, and there is extremely too much clearance between the pin and the bearing. Furthermore, the reason why he did not receive a knock YET was because he replaced a new bearing that is thicker than the worn one, and that one will eventually spin in no time. He never cleared the codes before starting the motor either. Moreover, that misfire could have been something simple if this guy just understood basic engine diagnosing. There is a lot more I can say about this, but I'm not. These are very good engines and easy to work on if you know what to do. Consequently, many guys on these channels that are DIY's need to be a little more careful with the influence they are putting out here about these cars. These are good motors that are fixable and reliable. Take Care.

@JrZCarZ

7 ай бұрын

First off, if I wanted a full rebuild I wouldn't be doing it in the dirt with the engine in the car in my back yard. Common sense tells you that if I was actually trying to rebuild it, the engine would have been on a stand indoors. There was nothing 'simple' about this problem. If you actually watched the other videos you would see bearing material circulated all over the engine. A knock sensor or clearing the codes wouldn't fix this problem. If you actually rebuild these engines and suggest that, I feel sorry for your customers who think they are ok just to have bearings spin a couple thousand miles later. I leave with this thought...... If you rebuild these engines, which would mean that you've rebuilt a few, how can you claim they are great motors? A great motor wouldn't need to be rebuilt. A great motor wouldn't have as many accounts of failures as there have been ALL OVER the internet. A great motor wouldn't have caused a class action lawsuit that Hyundai/Kia lost and now have to replace these engines....... I had a 88 Lincoln Town Car with 427,000 MILES on the original 5.0L engine and it was still running strong. THAT was a great engine. Same goes for the 4.6L in any Panther platform car. Great engine for longevity. Getting just over 130k miles out of an engine is pathetic nowadays. Most didn't even make it to that.... Shit engine that was good on gas.

Mine was bought with a bad motor! I had it towed to dealership had to pay diagnostic fee next day they gave me free rental and reimbursement of towing fee and the diagnostic fee currently putting new motor in it which the warranty STAYS WITH THE CAR NOT OWNER! And it’s lifetime as long as you keep up the maintenance THIS IS NOT A RECALL ITS FROM A CLASS ACTION LAWSUIT

@mikekoch4932

3 жыл бұрын

BS on that. the 'lifetime' motor warranty is ONLY for bad rod bearings going bad again NOT for anything else at all. NO warranty on entire engine once replaced. Shame on Hyundai for that should be 1/12K at mininum and more like 3/36K on entire new engine swap.

Did that say 300K!

@JrZCarZ

Ай бұрын

Nope it was only 135k.

Why not. Just erase the codes. Or clear. Them and let the battery reset it. And see if the limp mode goes off. And when it does drive it five hundred miles. Before reffing up the motor

@JrZCarZ

2 жыл бұрын

Because that was done and it didn't resolve the problem. There were more bearings that were wasted.

Check light flashing means its misfiring in multiple cylinders. So yeah the engine is done.

@JrZCarZ

3 жыл бұрын

Normally a flashing CEL means a misfire yes, but with the firmware update Hyundai puts in these cars and the p1326 code along with the flashing CEL, it's the kiss of death for the bearings. There's no active misfire on this one.

@micahhill4786

3 жыл бұрын

@@JrZCarZ damn Hyundai 😂🤦‍♂️

My sonata limited died quality. No noise just stopped towed to dealer. Still owe 5 k. No engine light. No code.

@JrZCarZ

6 ай бұрын

Does it have oil in it? They are notorious for eating oil and killing bearings. When mine died it ate all the oil in the crankcase in about 200-250 miles

What would be easiest is to take it to the manufacturer. And see if there was a recall on the engine.

I have a 2016 Elantra GT, had to have this service done, needed to go through 3rd party Warranty when I got it done because the suit wasn't settled yet I believe. But now it's been settled. The dealership fixed this for me already once. But Just a couple of days ago a slight rod tap has returned. THE BEARINGS WENT OUT AGAIN!!! I'm not going to let it get as far gone as it did the first time. It's been sitting in the driveway. I'm going to take it back to Hyundai on Monday and hope that they will cover this repair a SECOND time. I will NEVERRRR own another Hyundai. Complete GARBAGE! how does it happen TWICE! And I call them and they say, "Get maintenance records ready, because we have to inspect, and if it's your fault that this happened it won't be covered" So it sounds to me like they are going to try to find a way to pin the blame on me saying I waited too long between oil changes. But we'll see how it turns out. I still owe LOTS on this car, and I can't really afford to replace a motor in a car where I still owe so much on it. SOOOO pissed with Hyundai right now!!!

@JrZCarZ

10 ай бұрын

And this is why I'll NEVER own another Hyundai. So many people are saying that they have had the engine replaced more than once. Just yesterday I was enjoying a drive with my windows down cause it was beautiful out, then a Tuscon pulled out in front of me and even though I couldn't see smoke, it smelled horrible of straight oil pouring out the exhaust. Not even burned oil, but it smelled like oil straight out of the pan being dumped out. So disgusting that I had to shut my windows. PZEV my ass!

@ayayron10

9 ай бұрын

I'm bummed because the class action suit and extended warranty I read is for cold states and original owners. The second owners only got like 80k warranty on drive train. I have a 2013 elantra that I just noticed a ticking noise at 113k miles and I'm a second owner in a hot climate state. I have read that hyundai won't do anything for people like me in my area. They just sadly pay for new engine or total rebuild. I'm taking my car Monday to my local independent shop and see what they say as to engine health. I have taken care of the car since I bought it at only 24k miles on it. It doesn't seem to smoke or eat oil or trip any engine lights so not sure but I read it can be a sign of the classic piston slap issue they had on elantraa from 2011 to 2016.

@ayayron10

9 ай бұрын

​@JrZCarZ what is you hypothesis on what I wrote below your comment?

Dude it’s covered by a recall. Why didn’t you take it to a dealer.

Jr. If the hyundai still has it and the check light is still flashing, what you have to do is remove it from the limp mode and do a reset memory and erase the fault code and thus the engine accelerates again, it only remains to test it a few times to see if the pcm does not give the P1326 code again. If possible you can give me a call or send a text. I give you my email. Ekomotriz@gmail.com for the first contact and give you my phone number. I am a mechanical technician with 20 years of experience and I have already seen this problem three times

@Sunsetime2

3 жыл бұрын

@JrZ CarZ

Take head gasket repair or buy one

@johnfranklin5277

2 жыл бұрын

??? This isn't a head gasket issue!!! Lol.

Pistol hits the valve bro

Got one just like it junk

I think these have a lifetime warranty now

@VelterZ

2 ай бұрын

Plz, are you sure? Because mine just happened yesterday.

@ShowMeWhatINeedToKnow

2 ай бұрын

@@VelterZ make sure you have oil in your engine before you take your car in.

@JrZCarZ

2 ай бұрын

They apparently have the discretion to deny any repairs, cause they told me to pound sand.

Just take it to dealer it’s free motor

That is the History of those engines.... No quality to them. after 100k. Sorry for you problems. Time for a different vehicle.