Very helpful video, I opted to replace the stock lights in my 2014 XLT since my local government refuses to illuminate a stretch of highway near my home. Couldn't have done it without you.

Best thing I’ve done to my explorer. Makes my 2014 look like the 2016 and up at night

Great video

I love the way they look but I wish the performance was better

Do the rubber weather caps fit back on the headlight housing with that extra cooling part on the LEDs?

Why is it that most wont show how to do the drivers side. Cause it’s the pain in the a&&! Even with pulling the air cleaner top.

I was going to say, isn't HID the way to go with these housing's? Did you eventually change them?

@S0nicpeed

2 жыл бұрын

Thanks for the comment! I did upgrade to HID when I changed the headlight housing. I have a video with it on my channel as well

@Xenrei

2 жыл бұрын

@@S0nicpeed Would you be able to provide a link to the HID headlights that you purchased? The ones I got aren't compatible because there are a lot of extra wires than the originals. Thanks.

@S0nicpeed

2 жыл бұрын

@@Xenrei I purchased my kit from HID nation www.hidnation.com/collections/hid-kits

You left out the important part of putting the rubber cap back on. Did you leave it off or did you cut it to fit the wires? Thanks.....

@S0nicpeed

3 жыл бұрын

On those I did put the dust covers back on but if you get LEDs with fans, you won’t be able to put the dust covers back on

@threeputt3642

3 жыл бұрын

@@S0nicpeed thanks for the update!

@itsalexbaker

2 жыл бұрын

@@S0nicpeed is it ok to drive it without the covers back on?

@S0nicpeed

2 жыл бұрын

@@itsalexbaker yes, the covers only prevent dust from entering into the housing but I haven’t had any dust go into my housing at all

@itsalexbaker

2 жыл бұрын

@@S0nicpeed awesome! Thanks for the replay! Just replaced them!

I have a projector housing. What is the best light bulb to use?

@S0nicpeed

2 жыл бұрын

The best bulb for a projector housing is an HID for the money anyway, there are some better LEDs out there now that will work for a projector housing but you can get a good set of HIDs for around 60-70 dollars that will give quality and work for a long time! Thanks for commenting!

Do you need the cancellation wire from the options menu?

@S0nicpeed

3 жыл бұрын

K Dawg which cancellation wire do you mean?

@patrickdionne9083

2 жыл бұрын

I’m wondering the same thing. I put leds in my wife’s 14 explorer and they was shit. I bought another set that was better supposedly and it was same thing shit. I’m stumped on this shit

Bad quality video!!