2014 Ford Explorer LED interior pt 2
Ойын-сауық
Upgrading the rear interior LEDs in this video
Like, comment and subscribe
Tools used are
Rotary tool with cutting blade, sanding attachment
Flat head screwdriver
3- T10 LED pure white bulbs
Music
MNRVA - without you
Thanks to
/ @ximertracks
Пікірлер: 46
holy cow, what a process.. took me about an hour in a vw from '11 .. and 20 minutes was spent going to autozone and back cause i shorted a fuse.. lol
@S0nicpeed
3 жыл бұрын
Glad to see you got it done! I should have probably disconnected the battery
Super helpful and detailed! I'm gonna try it on my explorer now, thanks for posting!
@S0nicpeed
3 жыл бұрын
Thanks for commenting! Hope it all goes well for you!
@viper1723
2 жыл бұрын
Trashed my front dome light, had to ebay 2nd one, 🤞 pried the leds from the board ripping off the traces. Hope this time goes better 🙏
Very helpful, unfortunately, I don't have a helping hands station. BOY. THIS TOOK FOREVER. I had to use a pair of vise grips with a pair of pliers jammed in them to hold the board and led bulb at an angle. Found out the hard way by accident, that if you attempt to solder the new bulb on the board long enough, the whole old LED body will fall off, exposing just the original solder spots. After that, it didn't take anymore than 5 minutes to complete. But, I used this video to help, and you've been very helpful. If I wasn't broke, I'd send you some money.
Worked perfectly in my 2018 explorer. Thanks!
@S0nicpeed
2 жыл бұрын
Awesome to hear! Thanks for commenting
Worked perfectly thank you!!!
As a person who solders all day everyday, those cold solders are killing me 🤣🤣😂😂
@S0nicpeed
2 жыл бұрын
I promise I’ve gotten better 🤣😂
@ericvaca3582
2 жыл бұрын
@@S0nicpeed great video btw it helped me out a lot
@lukaszzych1
Жыл бұрын
this is an amateur😂😂😂
Lohice en mi Ford Explorer 2013 y si funcionó gracias CDMX 14 SEP 2023
You did a great job.
I have had bad luck with those leds that you put in. Within a month they would stop working or even would blink off and on.
Damn Ford would make it hard like that. I ain’t even gonna try.
There's a lot of components on that board for being a reading light.
Would using a T5 bulb or LED chip be better for this ?? Which should i get?
Makes me want to get rid of my 2013 escape idk why they made this model so dam difficult
Anyone know where you can find the same replacement LED chip so I could desolder the one one and replace it with the same thing but in cool white?
Hola, podrías ayudarme con una duda, al abrir las puertas de mi Explorer no tengo luz de recibimiento o de cortesia, ¿cuál es el motivo? El botón de luces de recibimiento no da respuesta crees que tenga algún problema con ese botón o será algún fusible?
How to did u remove the cable at beginning ?
how did you make the metal wire come out of the light
@S0nicpeed
3 жыл бұрын
I removed the light from its case
Never see this before, SMD LED how could you do that??
!OMG!
Chip set bulbs are better man no need for cutting
i hate FORD, took you 3 hours to change LED while other brand cars take 3 min
@samimohammad8628
Жыл бұрын
How to change ford explorer 2015 that's very difficult, even the fuse box is small box.
No canbus error code?
@S0nicpeed
3 жыл бұрын
No sir
How did you get the solder to stick
@S0nicpeed
Жыл бұрын
Thanks for commenting. If I remember correctly I made the solder get onto the board first then soldered the light onto it
@notkev202
Жыл бұрын
Thank you thank you. Took me like an hour and I had trouble soldering but I had it some what soldered but my light didn’t turn on.
@S0nicpeed
Жыл бұрын
@@notkev202 oh no! Did you verify prior to soldering
@notkev202
Жыл бұрын
@@S0nicpeed yeah I did but for reason it won’t turn on. But I’ll try again tmr.
@notkev202
Жыл бұрын
@@S0nicpeed what type of solder did you use
Anyone know where we can just buy the aftermarket LED housing instead of doing all of this, christ.
@S0nicpeed
2 жыл бұрын
Ask and you shall receive! drivebright.com/shop/dome-light-led-upgrade-package-explorers-without-sunroof/
@S0nicpeed
2 жыл бұрын
@tiffany s you can buy some blue ones and just follow the process I used
@S0nicpeed
2 жыл бұрын
@tiffany s just keep working with it, hope you can get it done!