On Amazon: *PURGE VALVE: amzn.to/2WU1aSq *SCAN TOOL: amzn.to/3bXfNZl

@DIYBikeLife

Жыл бұрын

Is there suppose to be ticking coming from it???

@angusangus1871

Жыл бұрын

@@DIYBikeLife YEAH , They tic annoyingly from new.

@DIYBikeLife

Жыл бұрын

@Angus Angus it's crazy the old one was so loud ticking you could hear it from outside the car..... the new one is a duralast one and it seems pretty quiet....thanks for the reply though....

@2bnax

4 ай бұрын

NO NEED TO GO TO ANY OTHER SITE - HE'S VERY THOROUGH

I had this same issue, and the dealer was going to charge me $750 for the repair! Outrageous!

@therationalfemaleXX

Жыл бұрын

I just got quoted an hour and a half labour for this repair 🥴

You’re a good man...also, the best car repair vid I’ve seen on KZread. Perfect delivery...No nonsense is an understatement. Blessings bro.

@NoNonsenseKnowHow

3 жыл бұрын

Thanks man

I have been driving around since February with my check engine light on and told I need a new canister purge valve. If this $20 part fixes my problem I'm going to happy and pissed at the same time! Thanks for the video!

Only video I have found on how to check the purge valve itself everybody else is talking about codes and crap. THANK YOU!!

Thanks for sharing! Had a p0400 code a while back that cleared itself, thankfully! Wheni got another code at 89000 something miles, assumed it was again the converter. It wasn't, and this looks like a cheaper fix than the converter. Your video was informative, detailed, yet like you said, easy for everyone to understand. May God bless you!

Super helpful! Took all of 20 mins to fix - although the one clip was harder to get off and back on than I thought it would be. Thanks so much!

@NoNonsenseKnowHow

3 жыл бұрын

Awesome! Glad it was helpful

Fast and easy!!!! Thank you for this!! Saved money and time! I can’t believe I actually changed it myself (I have no knowledge about cars) 😅

I got charged $360 for the purge valve, Plus the PCV seal on top of the engine, I already had watched videos where the PCV valve was not sucking in air so I troubleshoot it everything I could from my end had all the codes from AutoZone, But you Equipped me with the knowledge,To call bullshit ,& I got a full refund from the mechanic &called him out for his labor time,Thank you so much brother you are appreciated!

Excellent video. Took me about 5 minutes to get the electrical plug disconnected because it was just stuck, but after that I had the old valve out and the new one in in all of about 2 minutes. Really appreciate the video!

@DIYBikeLife

Жыл бұрын

Is it suppose to tick??

Thank you Sir !!! Having this issue on my son's 2013 Cruze. Just subbed to your channel. Very good video with demonstration and an explanation. The best one I found

Very good video, to the point, confident, clear.

Thank you 🙏 thank you thank you thank you!!!!! Watched your video , bought mine off Amazon for the low ! And replaced the part right before my family trip to the beach . A week later the engine light is off no more shut off and sputtering after filling up or when I accelerate on the gas thank you Jesus !.

You are the man!! I am so not mechanical and it went exactly like you described. Usually I watch a KZread video and it take the person 15 minutes and it takes me 2 hours.😂

i appreciate the video so much being hands on instructional. It was very helpful giving me confidence in getting the E purge valve repaired.Thank you !

GREAT KZread video. Great discription, great everything. Thank you

You made this fix Easy Peazy for me !!! Brief and to the point. Thanks

Parts are ordered! Thank you I am gonna give it a shot and let you know!

Concise . No Nonsense. Thanks To You, Now I Know How !! Blessings, Bro. 🙌

Thank you! This was just the video I needed

@NoNonsenseKnowHow

3 жыл бұрын

Sweet. Glad it helped. thx

😀 Thorough & Complete / BRINGING KNOWLEDGE & CONFIDENCE THANKS!!!

Thank you, thanks a lot 🙏. Just followed your video step by step and the engine light is gone. 😊

Electric clip was a bit of a pain in the butt, but otherwise quite easy. Thanks for the easy to follow video!

Awesome thanks ...because the dealership wants to charge 480 to fix it

@NoNonsenseKnowHow

3 жыл бұрын

No problem man. Yeah going to save big bucks if you fix yourself. Let me know how you make out and good luck!

@Edwardellis4

3 жыл бұрын

Really? My dealer just quoted me $90

@QualityTyme

4 ай бұрын

They be on some highway robbery shit

Great Vid Chris!

Great video man

very well described thanks

Good explanation. ❤

New sub here my daughter has an 18 and it has a p0446 will try this thanks for the video

@NoNonsenseKnowHow

3 жыл бұрын

Hey, thanks I appreciate that. Good luck getting it rectified

Thank you for a good video.

Thumbs up 👍 resetting and go😀

Solid video

Thank you brother!

Good work

Thank you for this video!! Had this same issue and replaced the part. Now my Cruze has a rough idle and sometimes shuts off while decelerating. Any idea what the problem might be?

Thank you for your help

Just FYI i have a sonic LT turbo its pretty much the same but there is a little plastic slider that you need to pull to get the electric thing out and 2 clips on that one side to pull the valve out.

Can you offer any insight into the fix with a 1.8L cruze 2015? Is it the exact same thing, I notice the part appears to be the same

Thank you!

bro you saved me i followed

@NoNonsenseKnowHow

3 жыл бұрын

Thanks man appreciate it

Big Help TY

Thanks brother

this really helps. Deserved to get a subscribe, like and share.

@NoNonsenseKnowHow

3 жыл бұрын

Great to hear and thanks!

Is it necessary to clear the codes once the new part is in? The scanner picked up this part to be replaced, which I did thanks to your instruction, but it still showed the same warning and subsequent reduced engine power. Not sure what to do next. I made sure it was installed correctly. At least I'm fairly sure it was, everything clicked into place.

Thanks ❤🌹so much very helpiful

This did it for me, thanks so much for the help!!

Thank you

Great job out of all the videos on this code lol

@jessicafarmer4689

2 жыл бұрын

I have a 2013 Chevy Cruze that's hard to start after I get gas and all the same symptoms... I ordered the purge valve from Amazon that supposedly fits my vehicle and it doesn't have that long skinny piece coming off the other side. Is it OK to use the old one?? Or is it called something else and I need to order that as well?

Thanks

It’s sucking through and I can taste fuel vapors” 😂🙌

Thank you very much, I may have something else along the line, I changed the valve twice and the sensor still gives me the same code.

Thanks Chris. My buddy's 14 Cruze has this and a P0171, which kinda makes sense to accompany this code. I'll try to follow-up if the purge valve ends up being the problem.

@DueceDelgado

9 ай бұрын

Was that the problem?

@BeardedHeroThe

9 ай бұрын

@buttaballa999 I am also curious if that was the problem as I have the same two codes on my Sonic right now.

@sremik

8 ай бұрын

any word?

@Buckterflewae

Ай бұрын

Yop I have now p0171 not other leaks and a little high idle when I start the car in cold, could be this?

2017 chevy trax has a tick coming from the engine bay and dealer says this is the part that would be causing since it has the same check engine code as stated in the video, is this the true cause of the tick or will i have something else going on?

Great video very informative and to the point thank you.quick question is there a simila car valve build into the intake and will it failings cause oil leaks?

@ozcorr909

2 жыл бұрын

I meant similar valve thx again

Hahah 👍🏼 Elementary as possible good video

Thank

I have a 1.8 L 2012 Chevy Cruz and bought this part thinking it was the correct one but it wasn't. If you have a 1.8 L you need a different kind of purge valve that Chevy will run you about 170 and you will not find anywhere online

Will this cause an occasional stall and make my fan turn on A LOT !

thanks good video , mine is ticking , is it normal?

Sir I have a question about a cable behind that pet you fixing. Mine is leaking a little bit. I am trying to fix it. Do you have a way to contact you?

does the engine have to be cold or can i do this when hot?

What kind of grease did you spray on those fixtures?

What kind of grease did you use on that part?

I have p0171 code and no oil leaks not leaks on pcv valve.. could be this ? I have a little weird iddle when I start the car

So do I need to disconnect the battery to replace this? He said one of the plugs was electrical.

Is it ok to drive until I get the part? Amazon says 3 weeks to ship.

I don't have no code or MIL on but mine ticks really bad and loud.....is that normal???

👍

hi, my mechanic told me that this code is for the gas cap, but your video shows something very different, do I replace the valve and the cap?

@NoNonsenseKnowHow

3 жыл бұрын

Best thing to do would be to test the valve and test the cap

Would a bad canister cause a misfire?

Hello, good afternoon, I removed the valve of my chevy and blew it, but it feels that it is covered at the time, I would like to know if it is necessary to change it.

@NoNonsenseKnowHow

3 жыл бұрын

It depends. You will have to try to diagnose and see if it's bad or not. Sometimes they only fail when they are hot or cold

Would this cause the engine to stall out as well intermittently while driving slow speeds?

@cruss0516able

2 жыл бұрын

Yes this would cause your car to stall when going slow speeds, at a complete stop or changing gears

I went ahead and replaced the valve .. After replacing, my car is even more shaky when idle, what could be the reason? 😅

Will this show check stability control light flashing? Thanks great video my chevy cruze start cold shaking and the stability track light flashing

@NoNonsenseKnowHow

3 жыл бұрын

To be honest, I don't remember off hand if it did or didn't show any other lights. Thanks and sorry I couldn't be of more help

@fiftypercent8422

3 жыл бұрын

i guess I'll change the pvc valve and purge valve just to make sure i got the problem solved thanks ☆

@fiftypercent8422

3 жыл бұрын

@@NoNonsenseKnowHow subed & liked ☆☆☆☆☆

@NoNonsenseKnowHow

3 жыл бұрын

Thanks! And hopefully it takes care of the problem. Good luck

@fiftypercent8422

3 жыл бұрын

@@NoNonsenseKnowHow thank you ☆☆☆☆☆

How do you budge that clip where it feeds into the manifold? I've just tried to change mine on the Sonic -- which means a little less room at the back of the engine to use pliers than on a Cruze -- and it will not release.

@NoNonsenseKnowHow

3 жыл бұрын

I'm not sure how to word it but you just got to kind of get it off of there like I did in the video. I don't think I could be much help via text. sorry

@dblissmn

3 жыл бұрын

@@NoNonsenseKnowHow Thanks. I was able to get the manifold connection free, as well as the harness but I simply could not move the line to the gas tank. The Sonic clip seems to be slightly different in design from the Cruze (clip made of blue plastic and more flimsy, fit of connector on solenoid tighter and even with the tab lifted well away I could not move it even half a millimeter, though with the harness disconnected the solenoid rotated freely on it) and so unless you have a idea on this I'm going to have to go to a mechanic.

@NoNonsenseKnowHow

3 жыл бұрын

Sorry without seeing it it's really hard to give any input. Sometimes those plastic connectors can be real stubborn.

@dblissmn

3 жыл бұрын

@@NoNonsenseKnowHow the best way of describing is this.... Instead of a two pronged red clip that slides tidily off there's a single blue clip about 4mm wide that is super flimsy. It broke as I was pulling it back. Under that is a light colored plastic tab that comes in from the opposite side. That lifts away fairly easily though it keeps wanting to drop back down. But I think what's under that is just an incredibly tight connection with the Sonic. Tight enough the clips don't matter.

@VsSoulmate_OT9_02

5 ай бұрын

@@NoNonsenseKnowHowI broke my clips trying to take it off, will that affect it :/

Does the engine light go off immediately after replacement?

@NoNonsenseKnowHow

3 жыл бұрын

No, need to clear the engine light with a code reader or disconnect the battery. Or drive the car and it should eventually go off after a little bit

So do yo know if this code P0496 is related to the code P0171? GM will fix code P0171 and related codes on Chevy Cruze 2104's with a 1.4L engine at no charge.

@NoNonsenseKnowHow

3 жыл бұрын

No I wouldn't say that they are related in my opinion. But it's hard to say without seeing the vehicle and the symptoms

@markblanchard5045

2 жыл бұрын

P0171 is also a purge valve issue..which will cause a lean fuel trim ....so one code can cause another code..ask me how I know....lol

@nilesg75

2 жыл бұрын

I have a 2015. Did you receive a letter from GM or something?

My problem was the right end didn't snap when I put it back on.

Que función ase el vehículo cuando faya la válvula

I took my girlfriend's off to test it, and I blew into it but there was very little air flow. I could feel it coming out of the other side and I could stop it from coming through by plugging up the one end, but was wondering if that could still throw the code if it wasn't very free-flowing.

@TheC0zz

Жыл бұрын

Was that the problem? I can blow air through mine but there is resistance. Unsure if that indicated it's bad or not. Thanks.

@xjcrossx

Жыл бұрын

@@TheC0zz it fixed her problem whatever it was. (Can't remember as it was a long time ago). So that part was in fact bad on her car.

@TheC0zz

Жыл бұрын

@@xjcrossx OK... Thank you very much for the reply.

@xjcrossx

Жыл бұрын

@@TheC0zz sounds like yours was doing what hers was doing so i'd replace it. And it is a common fail point so you might as well for 25 bucks. Eliminate it if nothing else. Let me know how it goes!

Just whole handedly fixed my car by myself for 40 bucks cause this video lol and I know nothing about cars

So it was the purge valve?

What if that part don’t fix that code?

mine doesnt throw a code on me but its clicking loud

i have a 2018 Chevrolet Cruze ive looked and looked it dont look nothing like the engine in the car in the video

@MarketingByMike

2 жыл бұрын

I have a 2016.5 second geneartion cruze. Cant seem.to find evap on mines. Doesnt have that tubing connector

Mine has failed a couple of times already. They seem to go bad a lot in these cars.

Have no clue why, mine is stuck on there completely. Even 4 different pliers wouldn't get the pos off on the drivers side.

Same purge valve as the ones in Maserati and Ferraris lol

Damn it do you know only times i've had to replace that part,,, The only thing good about that is when Is When my reuptake evolved into the coolant reservoir broke, I literally cut this piece and a half And install it Is directly into the Going in Is to the reservoir, And I literally fixed the coolant systen Is in my car with a sliced In half eva purge valve because that happened to have so many of my trunk... And I did it at a customer's house wild door dashing... Never had any idea this would work but it's literally the same Piece the inserts into the water Is distribution valver whatever you call it, Is there all crabby plastic pieces I had to replace with aluminum... But That's how cheap they are it's the same part Is in two places, And they both suck, Literally the piece that attaches onto the intake manifold, Is the same design As the reuptake hose into the coolant reservoir tank... I'm not a mechanic all right, You could slice the hose and stick it directly into the midshaft of the evap purge valve... And I took the other half of that hoes and used it to fix my break booster!! But I had a adapter that's a glorified Is basketball pump needle... Regardless My car has breaks Powered by coolant pieces, Is coolance powered by evap purge pieces, And eva purge val pieces that never work in the first place!!!😂😂😂😢😢

can,t get it to on hook

Would this certain purge valve work for a 2013 Chevy Cruze LT?

@rathedabgod

2 жыл бұрын

the title is literally 2012-2018 chevy cruze

Not a 2018.. mine looks way different

The part in the middle comes apart on the 2012. It doesn't look like his does that.

Oh my god look at that steering wheel... Are you sure that code doesn't mean " Needs a lotion on driver's hands immediately"!!???

2017 looks way different

Sucking, blowing, diaphragms wow haha there has to be a better way than inhaling fuel

@NoNonsenseKnowHow

4 жыл бұрын

lol yea there is. a hand vacuum pump. That's just a quick way I do it sometimes. I don't inhale them, just pull vacuum into my mouth

Can't get the new one to click on smh

@bryant_9773

Жыл бұрын

Same, what did you end up doing?

My purge valve is making a loud clicking noise but no code. I watched this video and he said it’s bad if so. kzread.info/dash/bejne/o3eTp5htYLDSYps.html Whats your take On it ?

@NoNonsenseKnowHow

3 жыл бұрын

Purge valve should be clicking under normal operation. That's the computer sending a duty cycle signal to it. That's my first thoughts anyway without seeing the car

@Wayloncashwillie

3 жыл бұрын

@@NoNonsenseKnowHow In the video he said if it sucks air from the left side of the purge valve the valve is stuck open. And it gives you negative fuel trim.

@NoNonsenseKnowHow

3 жыл бұрын

Yes if you disconnect the wire connector and it is still allowing airfare to pass through to the intake side of the valve then the valve is bad

@Wayloncashwillie

3 жыл бұрын

@@NoNonsenseKnowHow ok I just wanted to clarify and ask for your opinion thanks for your help

@NoNonsenseKnowHow

3 жыл бұрын

No problem. Good luck getting it rectified

DO NOT GET A AFTER MARKET ONE or you will piss away your money and be replaceing it in about a week or two, there junk, go to a outo parts store and get a ac delco or a OEM one, same money and your time

Thanks