Just wanted to thank you Kevin. Watching this video enabled me to change the clutch on my 2010 T260 Transit last month. I also did the flywheel, ball joints and drive shaft seals at the same time. Saved myself hundreds of pounds in labour charges. Pretty hard going in the wet and the cold and it getting dark so early but I did a couple of hours a day for about a week and had it done! I regularly checked back on your video to make sure I hadn't missed anything. Bit harder with no Impact Driver (Oldskool!) and I wasn't strong enough to lift the gearbox back so had to jack it. Couldn't have done it without this brilliant video so thanks a million for sharing. A great advert for your services too. I wish you much success!

In the rain on stands, absolutely amazing, camera work/ editing is excellent

@WMCS

4 жыл бұрын

Chris Thackray thanks a lot for the review... very much appreciated.. and for visiting the channel 🤙🏽...

@abdelalibouayoun6868

2 жыл бұрын

@@WMCS - TGV

We all appreciate the work you put in man, it must be bloody annoying keep messing around with the camera. Nice job Kevin, Top man :)

@WMCS

4 жыл бұрын

colintx800 thanks pal ... honestly sometimes the effort it takes just to get the light, camera, action going can get a bit tense 😬...😂😂.. thanks for the appreciation tho..

@raullcalzadilla3541

3 жыл бұрын

Williams can do it because he knows he can. Forget about annoying or any other thing, he drives his mind through all of that, because he knows he can.

@redlineracing4947

Жыл бұрын

@@WMCS 2:59 what is the name of that tool used to remove driveshaft?

Another great video. Every time one of the younger guys complain in my shop that the Transmision Jack seems a little wobbly plus they have access to a two pole lift I’m going to play one of your videos during our lunch time. Be safe and keep up the great work.

Another mother of a box goes in effortlessly and in record time,,,, amazing stuff to watch really enjoy watching a professional making it look easy,,,,, Magic

This guy earned my respect. Outstanding job!!!

@WMCS

3 жыл бұрын

Alfa thanks a lot for the support. Really appreciate it ...

Had to swap my engine, this vid although not for an engine swap helped loads, so cheers Kev ... saved me loads of time ..

@WMCS

3 жыл бұрын

Hey Kevin. Thanks for taking time to leave a feedback hope your repair was a complete success.

Now this is what I'm talking about perfect bug man spot on👍👍👍👍

Incredible workmanship. This guy does a relatively intensive work very easy. Others would speak and act if they had to move a mountain when performing this clutch job. Thanks

@WMCS

4 жыл бұрын

Pesar25 thanks for a great review.. you’re absolutely right .. it’s quite labour intense this work.

Thank you, that was a great tutorial excellent camera work too, especially liked the skill needed to pump the jack with your leg while holding the gearbox, great job and thank you again for the lesson.

@WMCS

2 жыл бұрын

Appreciate the feedback Lisa. That was all limbs on deck … ☀️🍻

Your a bloody strong man Kevin.

Can’t believe he does it on Halfords axle stands balls of steel

PARABÉNS PELO TRABALHO VOCÊ É UM GUERREIRO QUE MERECE RESPEITO.... PARABÉNS 👏👏👏👏

Appreciate the upload mate. Got quoted 9 hours for the job lol now I know it only takes 20 minutes

What an inspirational video respect to you mate you make it look easy I wish I had half the skill set 👍

Remember doing a few of these during the first few months when I started working at a shop back in 2014. One of them had an issue with the clutch master cylinder, it could not be bled from the new slave cylinder. It worked fine with the old clutch until the slave cylinder was replaced during the process. I was scratchin my head for an afternoon until I decided to order a new master cylinder for the clutch and behold it bled normally.

I work on busses mostly - not always.. Usually I do stuff everyone else has passed on as "Impossible". My "Videos" would start with taking off the wheel - whereby nothing would budge using any form of impact wrench below a 3/4" and even then it would be a struggle.. I use a 9' breaker bar on 3/4" sockets as everyone tightens bus bolts waaay over tight "just in case"/"Insurance"/Lawsuits.. From there on in, it would be very similar crawling around underneath, cold, wet, covered in muck that falls off, eyes full of dust & debris, working on heavy stuff no sane person ought work on. Anyone that comes in asks am I mad seeing the sheer graft that is involved daily doing even the routine stuff - which is why I like this Channel - it's a Graft Channel - and Graft these days is rare. It pays well - but you earn it. Nobody much does it for good reason - it's fairly straightforward, but far from easy. Kevs Channel is one you go to remember you could be grafting harder if you tried. No fancy words, no soundtrack - but if you know, you just know. THIS.IS.SPARTA! Shoutout to all the Mechanical Warriors. Keep on keeping on. No swearing allowed - it's inanimate metal, it won't care & was sent to test you. Don't fear the clutch - make the clutch fear You. If you're near Kevin & need a clutch - ring him. Consider yourself privileged to have such a great service to hand.

Man you must be loving your job , I've been fixing cars and vans for 40 years, saw you have a minute after getting the box back in , people don't appreciate what we do to our bodies heaving heavy parts dead weight off the floor back into their vehicles , do you like working in the rain , could do with another jack to take the weight of the g box take care of yourself when lifting , a proper job there , hope you charge properly for the job , don't throw away the clutch points , quite a lot of decent stuff on the Repexpert site , have a look if you're not registered with them , well done

You make everything look easy well done keep up the good work

@WMCS

4 жыл бұрын

redlorry99 thanks a lot .. really appreciate your feedback

Wow!! Excelent, congratulations 👏🏻👏🏻

Just been looking for a vid on this, me n 2 others did this 🤣 you make it look so easy, had to strip it all down again as was sold the wrong fly wheel, as didn't get to do it the same way with just 2 this time, so your way on my own looks the best way to go thanks again Kevin 👍😎

@WMCS

3 жыл бұрын

Thanks for the review.., hope all goes well.

Great video Kevin, i would never have attempted my mk7 6 gear fwd if i had'nt watched this. As for lifting the box i was lucky to have a genie handy at the time but still a hard job thankyou for your hard work in making this video i owe you a pint pal.

@WMCS

2 жыл бұрын

Thanks for the feedback James 🍻🍻🍻

...to do all this work without the convenience of a mechanic shop....amazing..!!! Sincerely I do admire you..!!!! I did subscribe to your channel .... Greetings from US......

I wish I lived next door to u outstanding work bro

@WMCS

4 жыл бұрын

tanveer khan thanks for the feedback mate. ... I’m actually your neighbour from down the road ..😆

Hey this kid is good. Old school I like it. Well done lad.

I was a Mobile Clutch Fitter for 30yrs, watching you gave me a little chuckle, that's how I would work, using my leg to operate the jack whiles removing/fitting gearbox, the only tip I can give you Kevin, 1, buy a big sheet of tarpaulin, back your van onto the vehicle with the back doors open, then clamp the tarpaulin to the back of the van, go straight over the car and tuck it in, you can then work without getting wet, plus you can then get things out of the van without getting wet, 2,Buy good thermal underwear (long johns). sadly your hands and shoulders will wear. Oh and 3, leave the vehicle running for as long as you can in the winter, just to take the sting out of the cold metal, other then that, all the best mate.

@WMCS

2 жыл бұрын

Thank you. Much appreciated

Well at least you you had some room to work on that one I was nigh on helping you to lift that thing up another excellent job Kevin take care bud 👍

@WMCS

4 жыл бұрын

Alister West mate that was one of the quickest gearbox in and out so far I’ve done. Really nice layout and plenty of room. But my goodness it was a heavy lump of metal that gearbox was ...😆

watched from start to finish superb!

@WMCS

4 жыл бұрын

V4 ************ thanks mate. You’re definitely a valued subscriber... always appreciate your reviews

@tutsywutsy

3 жыл бұрын

@@WMCS I watched from start to finish as I'm going to replace my mk7 gearbox.

great video kevin you make it look easy

Wow great video and great detail - it shows you that the have a go guys / me - it’s well over my tools and skill level - I guess that’s why we need you Kevin - Top man 👏🏻👏🏻👍🏻👍🏻

OMG!! Ive had to stop 23.59 In to say WOWWWW What a mechanic!! 🤩 I Think its WOW blowin me away here.. Jeeze what an artist and a amazing Knowlege! I am In AWE ANd is it possible to fall in love with someone watching their amazing work AYE!! Fantastic !!! Im away back to Watch the rest now lol WOW! 🤩🤩🤩

Hi very big box and no light wait very well done and a very big help to me many thanks Eliot

@WMCS

4 жыл бұрын

Eliot Heasman definitely a heavy box. And thanks for your review... much appreciated

Long extensions is a must 👍

Nice work! Show’s commitment to take the gearbox out that way with no help 👌💪🏻😁

@WMCS

2 жыл бұрын

Thanks and have a great weekend.

Thanks again Kevin 👍👍

That is a hard job on a lift, respect 👏

@WMCS

2 жыл бұрын

Thanks Gazza 🍻

Absolutely brilliant video. I have just saved a lot of people paying Someome todo this job. If they know what there doing

That box must have been heavy on your chest buddy! Excellent job👍🏻 time for a hot bath 🛁

Another great video mate, keep it up. Love the channel.

@WMCS

4 жыл бұрын

Pete mechanic thanks Pete there’s a a couple more coming as from tomorrow. Always appreciate the feedback

Salut super bon boulot merci !! In inglish: it's a very good job. Thanksssss

Thx and respect!

Отличная работа.

Fair play mate. I have done these on 2 post Ramps. And they are a bit tricky. So much respect for doing it on the floor.

@stedavo811

4 жыл бұрын

James McGrath the nothing hard about them done them easy on 4 post ramps not hard

@jamesmcgrath7903

4 жыл бұрын

Steven Davies not hard now after I have done a few.

@stedavo811

4 жыл бұрын

The first one I did I did on a 4 Post ramp and I was not hard

@WMCS

4 жыл бұрын

James McGrath thanks for the feedback always great to have a review from a fellow mechanic

@jamesmcgrath7903

4 жыл бұрын

Kevin-Albert Williams watch a few videos mate. Keep up the good work.

After watching this video . I just subscribed very good work will look forward to more videos 👍🏻

@WMCS

4 жыл бұрын

Lee Smith thanks for subscribing.. definitely more videos every week. Thanks for visiting the channel.

Nice morning at the gym. lifting weights.😁😁 I like to see the job well done.

@WMCS

4 жыл бұрын

carles Girona nothing beats it mate. And the gym is for free ...😆

🌟Very silence but very powerful video 👍👍👍💕

Superb piece of work from a very skilled mechanic ! I now realize that when I need a new clutch this is not a job I can do. I will be calling Kevin. P.S. please use heavy duty axle stands. Reduce risks whenever possible. In cold weather wear wear more layers which can be removed if getting too hot !

@WMCS

3 жыл бұрын

Thanks for the support and word of caution George. Really appreciate it. , 🍻✨✨

Nice work. Thanks for sharing.

@WMCS

4 жыл бұрын

Duncan Harradine thanks for the review. And for visiting the channel. Much appreciated

Fantastic video

@WMCS

4 жыл бұрын

Springer spaniel thanks for visiting the channel.... appreciate the feedback

Trop fort bravo 👏👏👏

Ты просто молодец так держать ты просто красавчеггг

hello, I wonder you're a good young man, nowadays it's a rarity. power to you. martin from Estonia.

Thank you

Amazing pro vid ,,,, what youtube should be about..... thankyou !!

you have to remove the engine and transmission just to change it, that's insane so much work

@WMCS

3 жыл бұрын

Just transmission

Wonderful work Fair Play You make it look easy, I've done them talk about a heavy box. I wonder If You built yourself some sort of trailer that opens out as a small shed even enough for around the front as shelter Your young but the body will age faster in the cold and damp.

Don't be fooled, this is no ordinary mechanic. His work is clearly how his brain works.

Buen video saludos desde cancun amigo

1000th like ,2 nights in a row .

Good video thankyou 👍

Votre travail et magnifique,le dieux te protège,frr,

Hey Kevin, i work on the same way like you do so i now how that feels. Again a great video mate and greetings from the Netherlands.

@WMCS

4 жыл бұрын

mat kliko that’s really great to know. Do you do a bit of everything or just clutch like I. Really appreciate your feedback and for visiting the channel

@matkliko3309

4 жыл бұрын

@@WMCS I do almost everything, clutch, engine, brakes and it was in the first place a hobby. But i have also a job in a factory and now i have time to short. I cant wait to see the next video.

@WMCS

4 жыл бұрын

mat kliko nice it’s definitely the special forces of the mechanic world. Working outside. Next video in about an hour.

@matkliko3309

4 жыл бұрын

@@WMCS Ok thanks.

Another job well done Kevin just as a matter of interest what is the easiest and worst cars to work on changing clutches Back in the days I used to be able to change a Vauxhall’s viva clutch from start to finish in 3/4 of an hour like you working off the floor but didn’t have any power tools then

Very nice video sir keep it up 👍💕

@WMCS

4 жыл бұрын

Raj Aasif thanks for the feedback.. much appreciated

Good worker👌💪

respect!

Awesome 🔧

Good man using the sealant around the csc , the amount of how to videos that don't, they must wonder why gearbox oil pisses through andcontaminates clutch

the van submits 🤣💪🏻

@WMCS

3 жыл бұрын

🍻😁🍺🍺🍺

What is the reason behind applying grease to the bolt holes on the bellhousing?

Very education u make it look so easy whats that red colour grease u use ??

Buenas noches gracias por sus videos con que solución lava??

17:13 very nice

Love the video. What was the in the spray bottle and what kind grease did you uses on the slave cylinder and outside bolt holes of the gearbox?

Thanks for all the videos, and do you have a car video?master3 2012

Harika işçilik tebrikler başarılar 👏👍

Top job shame you aint in the northwest id have you do some work right away

@tutsywutsy

3 жыл бұрын

He's a mobile mechanic ,as the saying goes have tools will travel.

Top stuff 👏 was this a 5 speed ?

Szacun ❤❤❤❤❤

This one looks pretty easy to do. @18:00 not sure you sprayed it enough 😂

Absolutely nice work, thanks a lot! One question however: what exactly did you do at the end when you applied pressure to the clutch pedal and opened a screw to let oil/some fluid out?

@tutsywutsy

3 жыл бұрын

He was bleeding the clutch slave cylinder of air

perfekt

God bless you a lot , I love your jobs I need you here in buffalo ny for my toyota corolla 2004 manual 5speed it's the fisrt see your face 🙂🙂🙂🙂🙂😁😁😁

@WMCS

2 жыл бұрын

Thanks mate. Really appreciate the feedback. Kind regards K-A. 🍻🍻🍻

you can make a review with Quickjack removing transmission please

Nice! 👌

Hi Kevin. Thanx a lot for posting those helpful videos. Never worked on my car on my own but thanks to your video I just removed the gearbox from my 2012 Transit 2.2 to get to first gear fixed!!! Took me 2 1/2 days, but hey... :) Could you please tell me what sort of red grease it is you put on the screws holes? And is it necessary to use a torque wrench? Cheers

@alanbedford9989

3 жыл бұрын

Good job kevin in what this is like just done honda crv mk3 but done now good job to both carry on the good work

Another lump of a gearbox. You make it look to easy 😂

Is the clutch replacement different on a front wheel drive to a rear wheel drive?

Brilliant video, I'm gonna tackle mine in the next few weeks. I used to work in a clutch center about 20 year ago so fingers crossed it goes OK. I think I need to change my flywheel as I have a slight shudder. Any advice on that Kevin? Not sure if it duel mass or flat. Its a 2011 fwd 2.2 140. And do I need a torque rench?

@redlineracing4947

Жыл бұрын

Wrench. Not needed but would do & always check torque specs. If it’s anything above the 100hp ones they all got the dual mass. Fuck the forums, go for the dual mass, puts less strain on everything & everything moves nice & smooth.

Alright mate how much do you charge for this and what areas do you cover? Cheers

Great video kevin do you know if their is a clutch conversion kit for mk7 transit 2.2 fwd 5 speed

Hi Kevin, congratulations on the work you do, both mechanical and videographic, I wanted to ask you what is the red paste you put in the holes of the gearbox screws and in the gearbox pin that enters the crankshaft? and also what do you spray on the flywheel, water? Grazieeee, keep it up you are a Great

@WMCS

4 жыл бұрын

Al Dec thanks for the nice review. Red rubber grease stops oxidisation of metal to metal and it’ll definitely reduce clutch drag which is when the clutch plate gets stuck on the spline which is another cause for premature wear Brake cleaner is great for really washing out all the dust and any oil residue as it’s a solvent it air dry almost instantly.

@aldec4329

4 жыл бұрын

Thanks you

another class video from the clutch master ! what is the black sealant stuff you put behind the bearing or is it ok to just put the bearing on without it ?

@WMCS

3 жыл бұрын

It’s Ezy gasket sealant. Without it gearbox oil would leak past the CSC..✅

@stuartjeffrey3939

3 жыл бұрын

@@WMCS Thanks again ! I used the two clutch videos you have made to help me do my dads transit slave cylinder so helpful. This one has aircon pipes under it but managed to lower it enough to get it out. got it out last night and now struggling to lift it back in - with three of us😂 you really do make it look easy mate must be about 70kilo

Top work! Just wondering if you have thought about a motorcycle jack to lower and lift gearbox back up? I got one on wheels with pull handle, a god send for engine removal

@WMCS

3 жыл бұрын

SI that’s interesting. How heavy is it to lift in and out of the van. I do have a gearbox cradle tho.

@SI-yc2tq

3 жыл бұрын

@@WMCS Hi Kevin, in all fairness i didn't really think about the loading and unloading from van.... Durrrrr 🙄. I would say its about 20-25kg but might still be worth the hassle if you got one that just doesn't want to line up. Keep up the good work man 👍

is the dual mass wheel on this than?

This guy is HULK. I just fitted a new flywhell and getting the gearbox back in place with 2 of us near killed me. This guy threw it in like it was nothing, must be 60-70kgs. A word of advice if your doing it alone..... put a board on your chest then roll the gearbox onto the board.

Hola, podrías decirme donde va exactamente el sensor de velocidad en esta furgoneta

Great job but I never once seen you using a click wrench and tightening the bolts to NM.

@WMCS

2 жыл бұрын

Click.. there you go.

i need my clutch replacing where you from and how much do you charge

that black mat which is u put flour can u tell me what is call thanks u

@WMCS

4 жыл бұрын

ALAN_UK it’s interlocking Matt. You can get them on eBay.